Update English translation strings

This is the last time for 0.7.0. We should avoid message changes
until the release. Translators can use the remaining time to update their languages on
Transifex.

The other languages need to be merged from Transifex just before release.

src/qt/bitcoinstrings.cpp

@@ -37,30 +37,34 @@ QT_TRANSLATE_NOOP("bitcoin-core", ""
 "Number of seconds to keep misbehaving peers from reconnecting (default: "
 "86400)"),
 QT_TRANSLATE_NOOP("bitcoin-core", ""
+"Set maximum size of high-priority/low-fee transactions in bytes (default: "
+"27000)"),
+QT_TRANSLATE_NOOP("bitcoin-core", ""
 "Unable to bind to %s on this computer. Bitcoin is probably already running."),
 QT_TRANSLATE_NOOP("bitcoin-core", ""
-"Warning: -paytxfee is set very high. This is the transaction fee you will "
+"Warning: -paytxfee is set very high! This is the transaction fee you will "
 "pay if you send a transaction."),
 QT_TRANSLATE_NOOP("bitcoin-core", ""
-"Warning: Please check that your computer's date and time are correct.  If "
+"Warning: Displayed transactions may not be correct! You may need to upgrade, "
+"or other nodes may need to upgrade."),
+QT_TRANSLATE_NOOP("bitcoin-core", ""
+"Warning: Please check that your computer's date and time are correct! If "
 "your clock is wrong Bitcoin will not work properly."),
 QT_TRANSLATE_NOOP("bitcoin-core", ""
 "You must set rpcpassword=<password> in the configuration file:\n"
 "%s\n"
 "If the file does not exist, create it with owner-readable-only file "
 "permissions."),
-QT_TRANSLATE_NOOP("bitcoin-core", ""
-"\n"
-"SSL options: (see the Bitcoin Wiki for SSL setup instructions)"),
 QT_TRANSLATE_NOOP("bitcoin-core", "Accept command line and JSON-RPC commands"),
 QT_TRANSLATE_NOOP("bitcoin-core", "Accept connections from outside (default: 1 if no -proxy or -connect)"),
 QT_TRANSLATE_NOOP("bitcoin-core", "Add a node to connect to and attempt to keep the connection open"),
 QT_TRANSLATE_NOOP("bitcoin-core", "Allow DNS lookups for -addnode, -seednode and -connect"),
 QT_TRANSLATE_NOOP("bitcoin-core", "Allow JSON-RPC connections from specified IP address"),
-QT_TRANSLATE_NOOP("bitcoin-core", "An error occured while setting up the RPC port %i for listening: %s"),
+QT_TRANSLATE_NOOP("bitcoin-core", "An error occurred while setting up the RPC port %i for listening: %s"),
 QT_TRANSLATE_NOOP("bitcoin-core", "Bind to given address. Use [host]:port notation for IPv6"),
 QT_TRANSLATE_NOOP("bitcoin-core", "Bitcoin version"),
 QT_TRANSLATE_NOOP("bitcoin-core", "Bitcoin"),
+QT_TRANSLATE_NOOP("bitcoin-core", "Block creation options:"),
 QT_TRANSLATE_NOOP("bitcoin-core", "Cannot downgrade wallet"),
 QT_TRANSLATE_NOOP("bitcoin-core", "Cannot initialize keypool"),
 QT_TRANSLATE_NOOP("bitcoin-core", "Cannot resolve -bind address: '%s'"),
@@ -112,6 +116,7 @@ QT_TRANSLATE_NOOP("bitcoin-core", "Prepend debug output with timestamp"),
 QT_TRANSLATE_NOOP("bitcoin-core", "Rescan the block chain for missing wallet transactions"),
 QT_TRANSLATE_NOOP("bitcoin-core", "Rescanning..."),
 QT_TRANSLATE_NOOP("bitcoin-core", "Run in the background as a daemon and accept commands"),
+QT_TRANSLATE_NOOP("bitcoin-core", "SSL options: (see the Bitcoin Wiki for SSL setup instructions)"),
 QT_TRANSLATE_NOOP("bitcoin-core", "Select the version of socks proxy to use (4-5, default: 5)"),
 QT_TRANSLATE_NOOP("bitcoin-core", "Send command to -server or bitcoind"),
 QT_TRANSLATE_NOOP("bitcoin-core", "Send commands to node running on <ip> (default: 127.0.0.1)"),
@@ -123,6 +128,9 @@ QT_TRANSLATE_NOOP("bitcoin-core", "Server private key (default: server.pem)"),
 QT_TRANSLATE_NOOP("bitcoin-core", "Set database cache size in megabytes (default: 25)"),
 QT_TRANSLATE_NOOP("bitcoin-core", "Set database disk log size in megabytes (default: 100)"),
 QT_TRANSLATE_NOOP("bitcoin-core", "Set key pool size to <n> (default: 100)"),
+QT_TRANSLATE_NOOP("bitcoin-core", "Set maximum block size in bytes (default: 250000)"),
+QT_TRANSLATE_NOOP("bitcoin-core", "Set minimum block size in bytes (default: 0)"),
+QT_TRANSLATE_NOOP("bitcoin-core", "Shrink debug.log file on client startup (default: 1 when no -debug)"),
 QT_TRANSLATE_NOOP("bitcoin-core", "Specify configuration file (default: bitcoin.conf)"),
 QT_TRANSLATE_NOOP("bitcoin-core", "Specify connection timeout (in milliseconds)"),
 QT_TRANSLATE_NOOP("bitcoin-core", "Specify data directory"),
@@ -143,6 +151,6 @@ QT_TRANSLATE_NOOP("bitcoin-core", "Use proxy to reach tor hidden services (defau
 QT_TRANSLATE_NOOP("bitcoin-core", "Use the test network"),
 QT_TRANSLATE_NOOP("bitcoin-core", "Username for JSON-RPC connections"),
 QT_TRANSLATE_NOOP("bitcoin-core", "Wallet needed to be rewritten: restart Bitcoin to complete"),
-QT_TRANSLATE_NOOP("bitcoin-core", "Warning: Disk space is low"),
+QT_TRANSLATE_NOOP("bitcoin-core", "Warning: Disk space is low!"),
-QT_TRANSLATE_NOOP("bitcoin-core", "Warning: this version is obsolete, upgrade required"),
+QT_TRANSLATE_NOOP("bitcoin-core", "Warning: This version is obsolete, upgrade required!"),
 };

src/qt/locale/bitcoin_en.ts

@@ -216,12 +216,22 @@ This product includes software developed by the OpenSSL Project for use in the O
     </message>
     <message>
         <location line="+1"/>
-        <source>WARNING: If you encrypt your wallet and lose your passphrase, you will &lt;b&gt;LOSE ALL OF YOUR BITCOINS&lt;/b&gt;!
+        <source>Warning: If you encrypt your wallet and lose your passphrase, you will &lt;b&gt;LOSE ALL OF YOUR BITCOINS&lt;/b&gt;!</source>
-Are you sure you wish to encrypt your wallet?</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
-        <location line="+9"/>
+        <location line="+0"/>
+        <source>Are you sure you wish to encrypt your wallet?</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <location line="+106"/>
+        <location line="+24"/>
+        <source>Warning: The Caps Lock key is on!</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <location line="-121"/>
         <location line="+49"/>
         <source>Wallet encrypted</source>
         <translation type="unfinished"></translation>
@@ -232,13 +242,7 @@ Are you sure you wish to encrypt your wallet?</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
-        <location line="+96"/>
+        <location line="+5"/>
-        <location line="+24"/>
-        <source>Warning: The Caps Lock key is on.</source>
-        <translation type="unfinished"></translation>
-    </message>
-    <message>
-        <location line="-115"/>
         <location line="+7"/>
         <location line="+42"/>
         <location line="+6"/>
@@ -292,12 +296,12 @@ Are you sure you wish to encrypt your wallet?</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
-        <location line="+247"/>
+        <location line="+248"/>
         <source>Synchronizing with network...</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
-        <location line="-325"/>
+        <location line="-326"/>
         <source>&amp;Overview</source>
         <translation type="unfinished"></translation>
     </message>
@@ -387,7 +391,7 @@ Are you sure you wish to encrypt your wallet?</source>
         <translation type="unfinished"></translation>
     </message>
     <message numerus="yes">
-        <location line="+240"/>
+        <location line="+241"/>
         <source>~%n block(s) remaining</source>
         <translation>
             <numerusform>~%n block remaining</numerusform>
@@ -395,12 +399,12 @@ Are you sure you wish to encrypt your wallet?</source>
         </translation>
     </message>
     <message>
-        <location line="+11"/>
+        <location line="+6"/>
         <source>Downloaded %1 of %2 blocks of transaction history (%3% done).</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
-        <location line="-258"/>
+        <location line="-254"/>
         <source>&amp;Export...</source>
         <translation type="unfinished"></translation>
     </message>
@@ -530,12 +534,12 @@ Are you sure you wish to encrypt your wallet?</source>
         </translation>
     </message>
     <message>
-        <location line="+48"/>
+        <location line="+40"/>
         <source>Downloaded %1 blocks of transaction history.</source>
         <translation type="unfinished"></translation>
     </message>
     <message numerus="yes">
-        <location line="+15"/>
+        <location line="+22"/>
         <source>%n second(s) ago</source>
         <translation>
             <numerusform>%n second ago</numerusform>
@@ -661,7 +665,7 @@ Address: %4
 <context>
     <name>ClientModel</name>
     <message>
-        <location filename="../clientmodel.cpp" line="+84"/>
+        <location filename="../clientmodel.cpp" line="+86"/>
         <source>Network Alert</source>
         <translation type="unfinished"></translation>
     </message>
@@ -951,12 +955,12 @@ Address: %4
         <translation type="unfinished"></translation>
     </message>
     <message>
-        <location filename="../optionsdialog.cpp" line="+63"/>
+        <location filename="../optionsdialog.cpp" line="+55"/>
         <source>default</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
-        <location line="+133"/>
+        <location line="+134"/>
         <location line="+9"/>
         <source>Warning</source>
         <translation type="unfinished"></translation>
@@ -968,7 +972,7 @@ Address: %4
         <translation type="unfinished"></translation>
     </message>
     <message>
-        <location line="+25"/>
+        <location line="+29"/>
         <source>The supplied proxy address is invalid.</source>
         <translation type="unfinished"></translation>
     </message>
@@ -1557,7 +1561,7 @@ Address: %4
     </message>
     <message>
         <location line="-73"/>
-        <source>Wallet unlock was canceled.</source>
+        <source>Wallet unlock was cancelled.</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
@@ -2097,22 +2101,22 @@ Address: %4
 <context>
     <name>bitcoin-core</name>
     <message>
-        <location filename="../bitcoinstrings.cpp" line="+62"/>
+        <location filename="../bitcoinstrings.cpp" line="+65"/>
         <source>Bitcoin version</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
-        <location line="+76"/>
+        <location line="+81"/>
         <source>Usage:</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
-        <location line="-22"/>
+        <location line="-25"/>
         <source>Send command to -server or bitcoind</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
-        <location line="-19"/>
+        <location line="-20"/>
         <source>List commands</source>
         <translation type="unfinished"></translation>
     </message>
@@ -2127,7 +2131,7 @@ Address: %4
         <translation type="unfinished"></translation>
     </message>
     <message>
-        <location line="+19"/>
+        <location line="+23"/>
         <source>Specify configuration file (default: bitcoin.conf)</source>
         <translation type="unfinished"></translation>
     </message>
@@ -2137,7 +2141,7 @@ Address: %4
         <translation type="unfinished"></translation>
     </message>
     <message>
-        <location line="-42"/>
+        <location line="-46"/>
         <source>Generate coins</source>
         <translation type="unfinished"></translation>
     </message>
@@ -2147,12 +2151,12 @@ Address: %4
         <translation type="unfinished"></translation>
     </message>
     <message>
-        <location line="+55"/>
+        <location line="+59"/>
         <source>Specify data directory</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
-        <location line="-5"/>
+        <location line="-8"/>
         <source>Set database cache size in megabytes (default: 25)</source>
         <translation type="unfinished"></translation>
     </message>
@@ -2162,12 +2166,12 @@ Address: %4
         <translation type="unfinished"></translation>
     </message>
     <message>
-        <location line="+3"/>
+        <location line="+6"/>
         <source>Specify connection timeout (in milliseconds)</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
-        <location line="-28"/>
+        <location line="-32"/>
         <source>Listen for connections on &lt;port&gt; (default: 8333 or testnet: 18333)</source>
         <translation type="unfinished"></translation>
     </message>
@@ -2182,22 +2186,22 @@ Address: %4
         <translation type="unfinished"></translation>
     </message>
     <message>
-        <location line="+59"/>
+        <location line="+63"/>
         <source>Specify your own public address</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
-        <location line="-69"/>
+        <location line="-74"/>
         <source>Bind to given address. Use [host]:port notation for IPv6</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
-        <location line="+71"/>
+        <location line="+76"/>
         <source>Threshold for disconnecting misbehaving peers (default: 100)</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
-        <location line="-96"/>
+        <location line="-104"/>
         <source>Number of seconds to keep misbehaving peers from reconnecting (default: 86400)</source>
         <translation type="unfinished"></translation>
     </message>
@@ -2207,27 +2211,57 @@ Address: %4
         <translation type="unfinished"></translation>
     </message>
     <message>
-        <location line="+31"/>
+        <location line="+34"/>
         <source>Accept command line and JSON-RPC commands</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
-        <location line="+59"/>
+        <location line="+60"/>
         <source>Run in the background as a daemon and accept commands</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
-        <location line="+29"/>
+        <location line="+33"/>
         <source>Use the test network</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
-        <location line="-87"/>
+        <location line="-92"/>
         <source>Accept connections from outside (default: 1 if no -proxy or -connect)</source>
         <translation type="unfinished"></translation>
     </message>
+    <message>
+        <location line="-20"/>
+        <source>Set maximum size of high-priority/low-fee transactions in bytes (default: 27000)</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <location line="+5"/>
+        <source>Warning: -paytxfee is set very high! This is the transaction fee you will pay if you send a transaction.</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <location line="+3"/>
+        <source>Warning: Displayed transactions may not be correct! You may need to upgrade, or other nodes may need to upgrade.</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <location line="+3"/>
+        <source>Warning: Please check that your computer&apos;s date and time are correct! If your clock is wrong Bitcoin will not work properly.</source>
+        <translation type="unfinished"></translation>
+    </message>
     <message>
         <location line="+13"/>
+        <source>An error occurred while setting up the RPC port %i for listening: %s</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <location line="+4"/>
+        <source>Block creation options:</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <location line="+6"/>
         <source>Connect only to the specified node(s)</source>
         <translation type="unfinished"></translation>
     </message>
@@ -2283,6 +2317,11 @@ Address: %4
     </message>
     <message>
         <location line="+4"/>
+        <source>SSL options: (see the Bitcoin Wiki for SSL setup instructions)</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <location line="+1"/>
         <source>Select the version of socks proxy to use (4-5, default: 5)</source>
         <translation type="unfinished"></translation>
     </message>
@@ -2297,7 +2336,22 @@ Address: %4
         <translation type="unfinished"></translation>
     </message>
     <message>
-        <location line="+21"/>
+        <location line="+7"/>
+        <source>Set maximum block size in bytes (default: 250000)</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <location line="+1"/>
+        <source>Set minimum block size in bytes (default: 0)</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <location line="+1"/>
+        <source>Shrink debug.log file on client startup (default: 1 when no -debug)</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <location line="+15"/>
         <source>Use UPnP to map the listening port (default: 0)</source>
         <translation type="unfinished"></translation>
     </message>
@@ -2317,12 +2371,17 @@ Address: %4
         <translation type="unfinished"></translation>
     </message>
     <message>
-        <location line="+3"/>
+        <location line="+2"/>
-        <source>Warning: this version is obsolete, upgrade required</source>
+        <source>Warning: Disk space is low!</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
-        <location line="-37"/>
+        <location line="+1"/>
+        <source>Warning: This version is obsolete, upgrade required!</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <location line="-41"/>
         <source>Password for JSON-RPC connections</source>
         <translation type="unfinished"></translation>
     </message>
@@ -2332,32 +2391,32 @@ Address: %4
         <translation type="unfinished"></translation>
     </message>
     <message>
-        <location line="-39"/>
+        <location line="-40"/>
         <source>Allow JSON-RPC connections from specified IP address</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
-        <location line="+58"/>
+        <location line="+60"/>
         <source>Send commands to node running on &lt;ip&gt; (default: 127.0.0.1)</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
-        <location line="-84"/>
+        <location line="-89"/>
         <source>Execute command when the best block changes (%s in cmd is replaced by block hash)</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
-        <location line="+104"/>
+        <location line="+112"/>
         <source>Upgrade wallet to latest format</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
-        <location line="-12"/>
+        <location line="-15"/>
         <source>Set key pool size to &lt;n&gt; (default: 100)</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
-        <location line="-13"/>
+        <location line="-14"/>
         <source>Rescan the block chain for missing wallet transactions</source>
         <translation type="unfinished"></translation>
     </message>
@@ -2377,18 +2436,12 @@ Address: %4
         <translation type="unfinished"></translation>
     </message>
     <message>
-        <location line="-39"/>
+        <location line="+52"/>
-        <source>
-SSL options: (see the Bitcoin Wiki for SSL setup instructions)</source>
-        <translation type="unfinished"></translation>
-    </message>
-    <message>
-        <location line="+87"/>
         <source>Use OpenSSL (https) for JSON-RPC connections</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
-        <location line="-18"/>
+        <location line="-21"/>
         <source>Server certificate file (default: server.cert)</source>
         <translation type="unfinished"></translation>
     </message>
@@ -2398,47 +2451,42 @@ SSL options: (see the Bitcoin Wiki for SSL setup instructions)</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
-        <location line="-104"/>
+        <location line="-109"/>
         <source>Acceptable ciphers (default: TLSv1+HIGH:!SSLv2:!aNULL:!eNULL:!AH:!3DES:@STRENGTH)</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
-        <location line="+128"/>
+        <location line="+121"/>
-        <source>Warning: Disk space is low</source>
-        <translation type="unfinished"></translation>
-    </message>
-    <message>
-        <location line="-15"/>
         <source>This help message</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
-        <location line="-110"/>
+        <location line="-118"/>
         <source>Cannot obtain a lock on data directory %s.  Bitcoin is probably already running.</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
-        <location line="+42"/>
+        <location line="+45"/>
         <source>Bitcoin</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
-        <location line="+71"/>
+        <location line="+76"/>
         <source>Unable to bind to %s on this computer (bind returned error %d, %s)</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
-        <location line="-64"/>
+        <location line="-68"/>
         <source>Connect through socks proxy</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
-        <location line="-12"/>
+        <location line="-13"/>
         <source>Allow DNS lookups for -addnode, -seednode and -connect</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
-        <location line="+42"/>
+        <location line="+43"/>
         <source>Loading addresses...</source>
         <translation type="unfinished"></translation>
     </message>
@@ -2458,12 +2506,12 @@ SSL options: (see the Bitcoin Wiki for SSL setup instructions)</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
-        <location line="+67"/>
+        <location line="+71"/>
         <source>Wallet needed to be rewritten: restart Bitcoin to complete</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
-        <location line="-69"/>
+        <location line="-73"/>
         <source>Error loading wallet.dat</source>
         <translation type="unfinished"></translation>
     </message>
@@ -2473,7 +2521,7 @@ SSL options: (see the Bitcoin Wiki for SSL setup instructions)</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
-        <location line="+43"/>
+        <location line="+47"/>
         <source>Unknown network specified in -onlynet: &apos;%s&apos;</source>
         <translation type="unfinished"></translation>
     </message>
@@ -2483,7 +2531,7 @@ SSL options: (see the Bitcoin Wiki for SSL setup instructions)</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
-        <location line="-69"/>
+        <location line="-73"/>
         <source>Cannot resolve -bind address: &apos;%s&apos;</source>
         <translation type="unfinished"></translation>
     </message>
@@ -2508,27 +2556,27 @@ SSL options: (see the Bitcoin Wiki for SSL setup instructions)</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
-        <location line="-51"/>
+        <location line="-55"/>
         <source>Error: This transaction requires a transaction fee of at least %s because of its amount, complexity, or use of recently received funds  </source>
         <translation type="unfinished"></translation>
     </message>
     <message>
-        <location line="+50"/>
+        <location line="+54"/>
         <source>Error: Transaction creation failed  </source>
         <translation type="unfinished"></translation>
     </message>
     <message>
-        <location line="+40"/>
+        <location line="+41"/>
         <source>Sending...</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
-        <location line="-94"/>
+        <location line="-99"/>
         <source>Error: The transaction was rejected.  This might happen if some of the coins in your wallet were already spent, such as if you used a copy of wallet.dat and coins were spent in the copy but not marked as spent here.</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
-        <location line="+70"/>
+        <location line="+74"/>
         <source>Invalid amount</source>
         <translation type="unfinished"></translation>
     </message>
@@ -2543,7 +2591,7 @@ SSL options: (see the Bitcoin Wiki for SSL setup instructions)</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
-        <location line="-44"/>
+        <location line="-45"/>
         <source>Add a node to connect to and attempt to keep the connection open</source>
         <translation type="unfinished"></translation>
     </message>
@@ -2553,7 +2601,7 @@ SSL options: (see the Bitcoin Wiki for SSL setup instructions)</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
-        <location line="+47"/>
+        <location line="+48"/>
         <source>Find peers using internet relay chat (default: 0)</source>
         <translation type="unfinished"></translation>
     </message>
@@ -2563,12 +2611,7 @@ SSL options: (see the Bitcoin Wiki for SSL setup instructions)</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
-        <location line="-43"/>
+        <location line="+18"/>
-        <source>Warning: -paytxfee is set very high. This is the transaction fee you will pay if you send a transaction.</source>
-        <translation type="unfinished"></translation>
-    </message>
-    <message>
-        <location line="+61"/>
         <source>Loading wallet...</source>
         <translation type="unfinished"></translation>
     </message>
@@ -2598,12 +2641,12 @@ SSL options: (see the Bitcoin Wiki for SSL setup instructions)</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
-        <location line="+59"/>
+        <location line="+63"/>
         <source>To use the %s option</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
-        <location line="-124"/>
+        <location line="-132"/>
         <source>%s, you must set a rpcpassword in the configuration file:
  %s
 It is recommended you use the following random password:
@@ -2615,26 +2658,16 @@ If the file does not exist, create it with owner-readable-only file permissions.
         <translation type="unfinished"></translation>
     </message>
     <message>
-        <location line="+70"/>
+        <location line="+74"/>
         <source>Error</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
-        <location line="-19"/>
+        <location line="-30"/>
-        <source>An error occured while setting up the RPC port %i for listening: %s</source>
-        <translation type="unfinished"></translation>
-    </message>
-    <message>
-        <location line="-13"/>
         <source>You must set rpcpassword=&lt;password&gt; in the configuration file:
 %s
 If the file does not exist, create it with owner-readable-only file permissions.</source>
         <translation type="unfinished"></translation>
     </message>
-    <message>
-        <location line="-3"/>
-        <source>Warning: Please check that your computer&apos;s date and time are correct.  If your clock is wrong Bitcoin will not work properly.</source>
-        <translation type="unfinished"></translation>
-    </message>
 </context>
 </TS>