725b79a [test] Verify node doesn't send headers that haven't been fully validated (Russell Yanofsky)
3788a84 Do not send (potentially) invalid headers in response to getheaders (Matt Corallo)
Pull request description:
Nowhere else in the protocol do we send headers which are for
blocks we have not fully validated except in response to getheaders
messages with a null locator. On my public node I have not seen any
such request (whether for an invalid block or not) in at least two
years of debug.log output, indicating that this should have minimal
impact.
Tree-SHA512: c1f6e0cdcdfb78ea577d555f9b3ceb1b4b60eff4f6cf313bfd8b576c9562d797bea73abc23f7011f249ae36dd539c715f3d20487ac03ace60e84e1b77c0c1e1a
fb00c45c3 [tests] Explicitly disallow support for p2p versions below 60001 (John Newbery)
3858aabbd [tests] Remove support for p2p alert messages (John Newbery)
c0b127470 [tests] Remove support for bre-BIP31 ping messages (John Newbery)
2904e301c [tests] Remove dead code from mininode.py (John Newbery)
Pull request description:
This is the first part of #11518. It removes a ~150 lines of unused code from the mininode module:
- remove unused `deliver_sleep_time` and `EarlyDisconnectError` code
- remove support for pre-BIP31 ping messages
- remove support for alert message
- explicitly don't support p2p versions lower than 60001
Should be an easy ACK for reviewers. If all extended tests pass, then this code really was dead :)
Tree-SHA512: 508e612ceb0b094250d18e75522d51e6b14cd069443050ba4af34d6f890c58721cb5653e8bc000b60635b9474d035b0dcd9c509c0dcdb3a7501df17b787f83b0
6c4042a Assert that CWallet::SyncMetaData finds oldest transaction. (Eelis)
Pull request description:
Without this assert, the Clang static analyzer warns about subsequent dereferencing of copyFrom, because it can't be sure that it's not nullptr. See #9573.
Tree-SHA512: 83cbcb32c52c94fcfefbc90ec7de2011dacd6bdb0da35adc401b8d8dda6a86de2fa0403e2158592268c2cf15eef4f3d887d98c90f1031d4735d5f4bf9dbc1d23
5a5e4e9 [wallet] Remove CTransaction&() helper conversion operator from wallet implementation. (Karl-Johan Alm)
Pull request description:
The `CTransaction&()` operator in `CMerkleTx` makes conversion into `CTransaction`s transparent, but was marked as to-be-removed in favor of explicitly getting the `tx` ivar, presumably as the operator can lead to ambiguous behavior and makes the code harder to follow.
This PR removes the operator and adapts callers. This includes some cases of `static_cast<CTransaction>(wtx)` → `*wtx.tx`, which is definitely an improvement.
Tree-SHA512: 95856fec7194d6a79615ea1c322abfcd6bcedf6ffd0cfa89bbdd332ce13035fa52dd4b828d20df673072dde1be64b79c513529a6f422dd5f0961ce722a32d56a
b109a1c Remove redundant nullptr checks before deallocation (practicalswift)
Pull request description:
Rationale:
* `delete ptr` is a no-op if `ptr` is `nullptr`
Tree-SHA512: c98ce769125c4912186a8403cc08a59cfba85b7141af645c709b4c4eb90dd9cbdd6ed8076d50099d1e4ec2bf75917d1af6844082ec42bbb4d94d229a710e051c
7963335 Fix -disablewallet default value (João Barbosa)
b411c2a Improve -disablewallet parameter interaction (João Barbosa)
Pull request description:
The first commit logs a message for each configured wallet if `-disablewallet` is set:
```
bitcoind -printtoconsole -regtest -disablewallet -wallet=foo -wallet=bar
...
WalletParameterInteraction: parameter interaction: -disablewallet -> ignoring -wallet=foo
WalletParameterInteraction: parameter interaction: -disablewallet -> ignoring -wallet=bar
```
It also moves up the `-disablewallet` check which avoids the unnecessary `-wallet` soft set.
The second commit fixes the default value of `-disablewallet`, currently the value is correct, but it should use `DEFAULT_DISABLE_WALLET`.
The third commit can be dropped or squashed, just took the opportunity to fix the coding style there.
Tree-SHA512: bec13d2b2be5adf4680c77212020ed27dd05f15c4c73542d2005d91108bf704e2df1707ed2bec696e584ecd40eff7a63e25201fd70400222aa5a8da6aed6afeb
16be7dd Improve bitcoind systemd service file (Florian Schmaus)
Pull request description:
Add comment how further options can be added or existing ones
modified. Use /run/${RuntimeDirectory} for PID file.
Remove TimeoutStopSec, TimeoutStartSec, StartLimitInterval,
StartLimitBurst directives as those should be set indivdually.
Remove Group to user the bitcoin user's default group.
Changed Restart from 'always' to 'on-failure' (can also be overwritten
individually).
Tree-SHA512: f76674c11fd6e3faaf786aa05686926523d9c875aad6b776337f800108fdb716470286805c532b494f8cf713cb5eea6b735e1c7c238ffb407a5cc909dda41aa4
9db9d62 Refactor: make the read function simpler (gnuser)
Pull request description:
Tree-SHA512: 5a80cc1b841488323d421e6a40b245d149cab1988247aed6cc7468dcc042d3df15b6711f25e40ff16e03ac21de36adbaa1d8da61ccdb94f97c8b70c24a5eedc5
bc9c0a7 Improve wallet-accounts test (Russell Yanofsky)
Pull request description:
Add comments and
- Verify sending to a account causes getaccountaddress to generate new addresses.
- Verify sending to a account causes getreceivedbyaccount to return amount received.
- Verify ways setaccount updates the accounts of existing addresses.
Tree-SHA512: 4facc8d10fb23847081e8081839d4050faa855cca40f34012b82297bf1a8cfdb975b26314bc518dc6b3f5997452a7acf309f9627e0dff359347c628b37014bfa
The mininode module includes code to support p2p versions below
60001. However, the test_framework does not support versions
of Bitcoin Core before V0.13.0. Remove code supporting
p2p versions before 60001 (which has never been run).
BIP31 support was added to Bitcoin Core in version 0.6.1. Our test
framework is incompatible with Bitcoin Core versions that old, so remove
all special logic for handling pre-BIP31 pings.
32ae82f5c [tests] use TestNode p2p connection in tests (John Newbery)
5e5725cc2 [tests] Add p2p connection to TestNode (John Newbery)
b86c1cd20 [tests] fix TestNode.__getattr__() method (John Newbery)
Pull request description:
Final two steps of #10082 : Adding the "mininode" P2P interface to `TestNode`
This PR adds the mininode P2P interface to `TestNode`. It simplifies the process for opening a P2P connection to the node-under-test from this:
```python
node0 = NodeConnCB()
connections = []
connections.append(NodeConn('127.0.0.1', p2p_port(0), self.nodes[0], node0))
node0.add_connection(connections[0])
```
to this:
```python
self.nodes[0].add_p2p_connection(p2p_conn_type=NodeConnCB)
```
The first commit adds the infrastructure to `test_node.py`. The second updates the individual test cases to use it. Can be separated if this is too much review for one PR.
Tree-SHA512: 44f1a6320f44eefc70489ae8350c6a16ad1a6035e4b9b7bafbdf19f5905ed0e2db85beaaf4758eec3059dd89a375a47a45352a029f39f57a86ab38a9ae66650e
p2p connections can now be added to TestNode instances.
This commit also updates the example test to use the new
p2p interface in TestNode to demonstrate usage.
A future commit will update the existing tests to use p2p through the
TestNode.
c098c58 Wrap dumpwallet warning and note scripts aren't dumped (MeshCollider)
a38bfbc Add wallet backup text to import*, add* and dumpwallet RPCs (MeshCollider)
Pull request description:
Closes https://github.com/bitcoin/bitcoin/issues/11243
Adds "Requires a new wallet backup" text to `addwitnessaddress`, `importprivkey`, `importmulti`, `importaddress`, `importpubkey`, and `addmultisigaddress`. Also adds a warning to `dumpwallet` that backing up the seed alone is not sufficient to back up non-HD addresses
Tree-SHA512: 76d7cdca54d5b458acf479154620322391b889922525fddd6153f4164cfee393ad743757400cb8f6b1b30f24947df68ea9043b4e509f7df77a8fa05dda370933
5ce7cb9 [net] De-duplicate connection eviction logic (Thomas Snider)
Pull request description:
While reviewing the safeguards against deliberate node isolation on the network by malicious actors, I found a good de-duplication candidate.
I think this form is much more legible (the type of `cutoffs` notwithstanding). ReverseCompareNodeTimeConnected is not included in the list since the cutoff size is a function of the remaining number of nodes in the candidate eviction set.
Tree-SHA512: ed17999fa9250dcf8448329219324477117e4ecd2d41dedd72ad253e44630eef50b3232c420f1862ebbfb9b8c94efbba1a235b519e39ff5946865c7d69a75280
24a0bdd bench: prefer a steady clock if the resolution is no worse (Cory Fields)
c515d26 bench: switch to std::chrono for time measurements (Cory Fields)
Pull request description:
gettimeofday has portability issues, see for example #11558.
Regardless of large-scale clock refactors in the future, I think it's fine for bench to just use std::chrono itself.
Note that this may slightly improve bench accuracy and changes the display from tiny floats to nanosecond counts instead.
Tree-SHA512: 122355456d01ec6cfcf6867991715cf3a95eabbf5a4f2adc26a059b50382ffb318b7639cdd575197fc4ee5be8b967c0404f1f920d6f5bd4ddd0bd63b5e5c5632
std::chrono removes portability issues.
Rather than storing doubles, store the untouched time_points. Then
convert to nanoseconds for display. This allows for maximum precision, while
keeping results comparable between differing hardware/operating systems.
Also, display full nanosecond counts rather than sub-second floats.
d61845818 Have SegWit active by default (Pieter Wuille)
4bd89210a Unit tests for always-active versionbits. (Anthony Towns)
d07ee77ab Always-active versionbits support (Pieter Wuille)
18e071841 [consensus] Pin P2SH activation to block 173805 on mainnet (John Newbery)
526023aa7 Improve handling of BIP9Deployment limits (Anthony Towns)
Pull request description:
Most tests shouldn't have to deal with the now-historical SegWit activation transition (and other deployments, but SegWit is certainly the hardest one to accomodate).
This PR makes a versionbits starttime of -1 equal to "always active", and enables it by default for SegWit on regtest. Individual tests can override this by using the existing `-vbparams` option.
A few unit tests and functional tests are adapted to indeed override vbparams, as they specifically test the transition.
This is in preparation for wallet SegWit support, but I thought having earlier eyes on it would be useful.
Tree-SHA512: 3f07a7b41cf46476e6c7a5c43244e68c9f41d223482cedaa4c02a3a7b7cd0e90cbd06b84a1f3704620559636a2268f5767d4c52d09c1b354945737046f618fe5
76ea17c79 Add mutex requirement for AddToCompactExtraTransactions(…) (practicalswift)
4616c825a Use -Wthread-safety-analysis if available (+ -Werror=thread-safety-analysis if --enable-werror) (practicalswift)
7e319d639 Fix -Wthread-safety-analysis warnings. Change the sync.h primitives to std from boost. (Matt Corallo)
Pull request description:
* Add mutex requirement for `AddToCompactExtraTransactions(…)`.
* Use `-Wthread-safety-analysis` if available.
* Rebased on top of https://github.com/TheBlueMatt/bitcoin/commits/2017-08-test-10923 - now includes: Fix -Wthread-safety-analysis warnings. Change the sync.h primitives to std from boost.
Tree-SHA512: fb7365f85daa2741c276a1c899228181a8d46af51db7fbbdffceeaff121a3eb2ab74d7c8bf5e7de879bcc5042d00d24cb4649c312d51caba45a3f6135fd8b38f
4a110a009 [build] .gitignore: add background.tiff (Sjors Provoost)
Pull request description:
On OSX, running `make deploy` results in three files that were not covered by `.gitignore`:
background.tiff
background.tiff.png
background.tiff@2x.png
Tree-SHA512: cee7a6ebbc50f28bf588121902f6026ec08cf6516d9e56734dfc1b2d3f238e2db5bf87411f6a74b8bd06569f792789ac9f9046e6183f63fd675b953f24b060fc
d0b1fc88d Docs: Change formatting for sequence of steps (Vivek Ganesan)
Pull request description:
A numbered list is used when the sequence of steps matters. A bulleted list is used to denote a set of items where the sequence does not matter.
The workflow is a sequence and hence changed to a numbered list.
Reference: https://www.w3.org/wiki/HTML_lists#Ordered_lists
Tree-SHA512: 310532713ed2dc3a5fe6d3b54f77fef09f355fa0ead57f2861c469e9149c658af4767cf00fb3e13569f6c4700edb0cc0265c2654c59393df80a99bf5123de5f5
A numbered list is used when the sequence of steps matters. A bulleted list is used to denote a set of items where the sequence does not matter.
The workflow is a sequence and hence changed to a numbered list.
cabff7588 rpc: Make logging RPC public (Wladimir J. van der Laan)
Pull request description:
This started out as a developer hack but now it's useful enough for general use. Unhide the call by moving it to `control` category. This makes it documented in `help`.
Tree-SHA512: f45fa378558b552d4e2a110bf85100b0eaaa6180bb5f62cb54a251f66026d4625b670c69d85c281eebbf4b56b80b65618c51a5a593b8f9d0a04b31e95adc91f4
a9b6ba0b7 Add missing cs_main locks when calling blockToJSON/blockheaderToJSON (practicalswift)
Pull request description:
`blockToJSON(...)` and `blockheaderToJSON(...)` read the variable `chainActive` which requires holding the mutex `cs_main`. So does `GetDifficulty(...)`.
Tree-SHA512: bfb94f5e3238accbf6a4daddde49d53f1891c38ae9b07e25b3098c485747159258f64bb66a50e147b32beac601de89d9d04ff717b6c4f1460d329c90a53d3333
3ab545d7f addrman: Add missing lock in Clear() (CAddrMan) (practicalswift)
Pull request description:
Add missing lock in `Clear()` (`CAddrMan`).
The variable `vRandom` is guarded by the mutex `cs`.
**Note to reviewers:** Does this look correct? Should the lock cover the entire scope of the method, or should it be limited to cover only `std::vector<int>().swap(vRandom);`?
Tree-SHA512: 8833f31beaed1728fa55b13ddf9e0b8e24e395931497329be2440ce1c5113ff02871707d40830260adabd30c4ea86088f5da5cf8a821150c0d820f50a2ce386a
ff35de8 [ui] Add toggle for unblinding password fields (Thomas Snider)
Pull request description:
Proposed change for adding the ability to toggle password visibility in the password dialog. This is similar to functionality in most password managers and is specifically added with the use case of password managers in mind - the password in that case is likely pasted twice into both the new password and confirm password fields.
If this is a welcome change, I am open to suggestions on rearranging the layout.
Tree-SHA512: 1823f356f8f941cc584c44de264433e9a573cb8a358efa300a412c4458b5564d8d193969be40859195cf9c8d6768eee895ee22440d51db4f09175f9b4e28bced
This started out as a developer hack but now it's useful
enough for general use. Unhide the call by moving it to `control` category.
This makes it documented in `help`.
Wladimir J. van der Laan
