Browse Source

init

pull/1/head
l-n-s 8 years ago
commit
a0c7248b68
  1. 60
      README.md
  2. 259
      docs/Doxyfile
  3. 57
      docs/build_notes_android.md
  4. 75
      docs/build_notes_cross.md
  5. 85
      docs/build_notes_ios.md
  6. 147
      docs/build_notes_unix.md
  7. 197
      docs/build_notes_windows.md
  8. 15
      docs/build_requirements.md
  9. 300
      docs/conf.py
  10. 43
      docs/config_opts_after_2.3.0.md
  11. 148
      docs/configuration.md
  12. 36
      docs/family.md
  13. 164
      docs/i2pd.conf
  14. 42
      docs/index.rst
  15. BIN
      docs/itoopieImage.png
  16. 3
      docs/subscriptions.txt
  17. 33
      docs/tunnels.conf
  18. 131
      docs/usage.md

60
README.md

@ -0,0 +1,60 @@
i2pd
====
i2pd (I2P Daemon) это полнофункциональная реализация I2P клиента на языке C++.
I2P (Невидимый Интернет Протокол) это универсальный анонимный сетевой
уровень. Все соединения через I2P анонимны и используют сквозное (end-to-end)
шифрование, участники не раскрывают свои настоящие IP адреса.
I2P клиент это программа для построения и использования анонимных I2P
сетей. Подобные сети обычно используются для анонимных peer-to-peer приложений
(файлообмен, криптовалюты) и для анонимных клиент-серверных приложений
(вебсайты, мессенджеры, чат-серверы).
I2P позволяет людям со всего мира общаться и делиться информацией без
ограничений.
* [Сайт](http://i2pd.website)
* [Документация](https://i2pd.readthedocs.io/ru/latest/)
* [Вики](https://github.com/PurpleI2P/i2pd/wiki)
* [Багтрекер](https://github.com/PurpleI2P/i2pd/issues)
* [Спецификация](https://geti2p.net/spec)
* [Twitter](https://twitter.com/hashtag/i2pd)
Установка
---------
Самый простой способ установить i2pd это использование
[бинарных файлов](https://github.com/PurpleI2P/i2pd/releases/latest).
Инструкции по сборке из исходников для вашей ОС смотрите
в [документации](https://i2pd.readthedocs.io/en/latest/)
**Поддерживаемые системы:**
* Linux x86/x64 - [![Build Status](https://travis-ci.org/PurpleI2P/i2pd.svg?branch=openssl)](https://travis-ci.org/PurpleI2P/i2pd)
* Windows - [![Build status](https://ci.appveyor.com/api/projects/status/1908qe4p48ff1x23?svg=true)](https://ci.appveyor.com/project/PurpleI2P/i2pd)
* Mac OS X
* FreeBSD
* Android
Использование
-------------
Смотрите в [документацию](https://i2pd.readthedocs.io/en/latest/) и
[документированный конфигурационный файл](https://github.com/PurpleI2P/i2pd/blob/openssl/docs/i2pd.conf).
Помощь монетками
----------------
BTC: 1K7Ds6KUeR8ya287UC4rYTjvC96vXyZbDY
DASH: Xw8YUrQpYzP9tZBmbjqxS3M97Q7v3vJKUF
LTC: LKQirrYrDeTuAPnpYq5y7LVKtywfkkHi59
ANC: AQJYweYYUqM1nVfLqfoSMpUMfzxvS4Xd7z
DOGE: DNXLQKziRPAsD9H3DFNjk4fLQrdaSX893Y
Лицензия
--------
Исходный код распространяется под лицензией BSD, полный текст
лицензии в файле LICENSE.

259
docs/Doxyfile

@ -0,0 +1,259 @@
DOXYFILE_ENCODING = UTF-8
PROJECT_NAME = "i2pd"
PROJECT_NUMBER =
PROJECT_BRIEF = "load-balanced unspoofable packet switching network"
PROJECT_LOGO =
OUTPUT_DIRECTORY = docs/generated
CREATE_SUBDIRS = NO
ALLOW_UNICODE_NAMES = NO
OUTPUT_LANGUAGE = English
BRIEF_MEMBER_DESC = YES
REPEAT_BRIEF = YES
ABBREVIATE_BRIEF =
ALWAYS_DETAILED_SEC = NO
INLINE_INHERITED_MEMB = NO
FULL_PATH_NAMES = YES
STRIP_FROM_PATH =
STRIP_FROM_INC_PATH =
SHORT_NAMES = NO
JAVADOC_AUTOBRIEF = NO
QT_AUTOBRIEF = NO
MULTILINE_CPP_IS_BRIEF = NO
INHERIT_DOCS = YES
SEPARATE_MEMBER_PAGES = NO
TAB_SIZE = 4
ALIASES =
TCL_SUBST =
OPTIMIZE_OUTPUT_FOR_C = NO
OPTIMIZE_OUTPUT_JAVA = NO
OPTIMIZE_FOR_FORTRAN = NO
OPTIMIZE_OUTPUT_VHDL = NO
EXTENSION_MAPPING =
MARKDOWN_SUPPORT = YES
AUTOLINK_SUPPORT = YES
BUILTIN_STL_SUPPORT = NO
CPP_CLI_SUPPORT = NO
SIP_SUPPORT = NO
IDL_PROPERTY_SUPPORT = YES
DISTRIBUTE_GROUP_DOC = NO
SUBGROUPING = YES
INLINE_GROUPED_CLASSES = NO
INLINE_SIMPLE_STRUCTS = NO
TYPEDEF_HIDES_STRUCT = NO
LOOKUP_CACHE_SIZE = 0
EXTRACT_ALL = NO
EXTRACT_PRIVATE = NO
EXTRACT_PACKAGE = NO
EXTRACT_STATIC = NO
EXTRACT_LOCAL_CLASSES = YES
EXTRACT_LOCAL_METHODS = NO
EXTRACT_ANON_NSPACES = NO
HIDE_UNDOC_MEMBERS = NO
HIDE_UNDOC_CLASSES = NO
HIDE_FRIEND_COMPOUNDS = NO
HIDE_IN_BODY_DOCS = NO
INTERNAL_DOCS = NO
CASE_SENSE_NAMES = YES
HIDE_SCOPE_NAMES = NO
SHOW_INCLUDE_FILES = YES
SHOW_GROUPED_MEMB_INC = NO
FORCE_LOCAL_INCLUDES = NO
INLINE_INFO = YES
SORT_MEMBER_DOCS = YES
SORT_BRIEF_DOCS = NO
SORT_MEMBERS_CTORS_1ST = NO
SORT_GROUP_NAMES = NO
SORT_BY_SCOPE_NAME = NO
STRICT_PROTO_MATCHING = NO
GENERATE_TODOLIST = YES
GENERATE_TESTLIST = YES
GENERATE_BUGLIST = YES
GENERATE_DEPRECATEDLIST= YES
ENABLED_SECTIONS =
MAX_INITIALIZER_LINES = 30
SHOW_USED_FILES = YES
SHOW_FILES = YES
SHOW_NAMESPACES = YES
FILE_VERSION_FILTER =
LAYOUT_FILE =
CITE_BIB_FILES =
QUIET = YES
WARNINGS = YES
WARN_IF_UNDOCUMENTED = NO
WARN_IF_DOC_ERROR = YES
WARN_NO_PARAMDOC = NO
WARN_FORMAT = "$file:$line: $text"
WARN_LOGFILE =
INPUT =
INPUT_ENCODING = UTF-8
FILE_PATTERNS = *.cpp *.h
RECURSIVE = NO
EXCLUDE =
EXCLUDE_SYMLINKS = NO
EXCLUDE_PATTERNS =
EXCLUDE_SYMBOLS =
EXAMPLE_PATH =
EXAMPLE_PATTERNS =
EXAMPLE_RECURSIVE = NO
IMAGE_PATH =
INPUT_FILTER =
FILTER_PATTERNS =
FILTER_SOURCE_FILES = NO
FILTER_SOURCE_PATTERNS =
USE_MDFILE_AS_MAINPAGE =
SOURCE_BROWSER = NO
INLINE_SOURCES = NO
STRIP_CODE_COMMENTS = YES
REFERENCED_BY_RELATION = NO
REFERENCES_RELATION = NO
REFERENCES_LINK_SOURCE = YES
SOURCE_TOOLTIPS = YES
USE_HTAGS = NO
VERBATIM_HEADERS = NO
CLANG_ASSISTED_PARSING = NO
CLANG_OPTIONS =
ALPHABETICAL_INDEX = YES
COLS_IN_ALPHA_INDEX = 5
IGNORE_PREFIX =
GENERATE_HTML = YES
HTML_OUTPUT = html
HTML_FILE_EXTENSION = .html
HTML_HEADER =
HTML_FOOTER =
HTML_STYLESHEET =
HTML_EXTRA_STYLESHEET =
HTML_EXTRA_FILES =
HTML_COLORSTYLE_HUE = 220
HTML_COLORSTYLE_SAT = 100
HTML_COLORSTYLE_GAMMA = 80
HTML_TIMESTAMP = YES
HTML_DYNAMIC_SECTIONS = NO
HTML_INDEX_NUM_ENTRIES = 100
GENERATE_DOCSET = NO
DOCSET_FEEDNAME = "Doxygen generated docs"
DOCSET_BUNDLE_ID = org.doxygen.Project
DOCSET_PUBLISHER_ID = org.doxygen.Publisher
DOCSET_PUBLISHER_NAME = Publisher
GENERATE_HTMLHELP = NO
CHM_FILE =
HHC_LOCATION =
GENERATE_CHI = NO
CHM_INDEX_ENCODING =
BINARY_TOC = NO
TOC_EXPAND = NO
GENERATE_QHP = NO
QCH_FILE =
QHP_NAMESPACE = org.doxygen.Project
QHP_VIRTUAL_FOLDER = doc
QHP_CUST_FILTER_NAME =
QHP_CUST_FILTER_ATTRS =
QHP_SECT_FILTER_ATTRS =
QHG_LOCATION =
GENERATE_ECLIPSEHELP = NO
ECLIPSE_DOC_ID = org.doxygen.Project
DISABLE_INDEX = NO
GENERATE_TREEVIEW = NO
ENUM_VALUES_PER_LINE = 4
TREEVIEW_WIDTH = 250
EXT_LINKS_IN_WINDOW = NO
FORMULA_FONTSIZE = 10
FORMULA_TRANSPARENT = YES
USE_MATHJAX = NO
MATHJAX_FORMAT = HTML-CSS
MATHJAX_RELPATH = http://cdn.mathjax.org/mathjax/latest
MATHJAX_EXTENSIONS =
MATHJAX_CODEFILE =
SEARCHENGINE = YES
SERVER_BASED_SEARCH = NO
EXTERNAL_SEARCH = NO
SEARCHENGINE_URL =
SEARCHDATA_FILE = searchdata.xml
EXTERNAL_SEARCH_ID =
EXTRA_SEARCH_MAPPINGS =
GENERATE_LATEX = NO
LATEX_OUTPUT = latex
LATEX_CMD_NAME = latex
MAKEINDEX_CMD_NAME = makeindex
COMPACT_LATEX = NO
PAPER_TYPE = a4
EXTRA_PACKAGES =
LATEX_HEADER =
LATEX_FOOTER =
LATEX_EXTRA_FILES =
PDF_HYPERLINKS = YES
USE_PDFLATEX = YES
LATEX_BATCHMODE = NO
LATEX_HIDE_INDICES = NO
LATEX_SOURCE_CODE = NO
LATEX_BIB_STYLE = plain
GENERATE_RTF = NO
RTF_OUTPUT = rtf
COMPACT_RTF = NO
RTF_HYPERLINKS = NO
RTF_STYLESHEET_FILE =
RTF_EXTENSIONS_FILE =
GENERATE_MAN = NO
MAN_OUTPUT = man
MAN_EXTENSION = .3
MAN_SUBDIR =
MAN_LINKS = NO
GENERATE_XML = NO
XML_OUTPUT = xml
XML_PROGRAMLISTING = YES
GENERATE_DOCBOOK = NO
DOCBOOK_OUTPUT = docbook
DOCBOOK_PROGRAMLISTING = NO
GENERATE_AUTOGEN_DEF = NO
GENERATE_PERLMOD = NO
PERLMOD_LATEX = NO
PERLMOD_PRETTY = YES
PERLMOD_MAKEVAR_PREFIX =
ENABLE_PREPROCESSING = YES
MACRO_EXPANSION = NO
EXPAND_ONLY_PREDEF = NO
SEARCH_INCLUDES = YES
INCLUDE_PATH =
INCLUDE_FILE_PATTERNS =
PREDEFINED =
EXPAND_AS_DEFINED =
SKIP_FUNCTION_MACROS = YES
TAGFILES =
GENERATE_TAGFILE =
ALLEXTERNALS = NO
EXTERNAL_GROUPS = YES
EXTERNAL_PAGES = YES
PERL_PATH = /usr/bin/perl
CLASS_DIAGRAMS = YES
MSCGEN_PATH =
DIA_PATH =
HIDE_UNDOC_RELATIONS = YES
HAVE_DOT = NO
DOT_NUM_THREADS = 0
DOT_FONTNAME = Helvetica
DOT_FONTSIZE = 10
DOT_FONTPATH =
CLASS_GRAPH = YES
COLLABORATION_GRAPH = YES
GROUP_GRAPHS = YES
UML_LOOK = NO
UML_LIMIT_NUM_FIELDS = 10
TEMPLATE_RELATIONS = NO
INCLUDE_GRAPH = YES
INCLUDED_BY_GRAPH = YES
CALL_GRAPH = NO
CALLER_GRAPH = NO
GRAPHICAL_HIERARCHY = YES
DIRECTORY_GRAPH = YES
DOT_IMAGE_FORMAT = png
INTERACTIVE_SVG = NO
DOT_PATH =
DOTFILE_DIRS =
MSCFILE_DIRS =
DIAFILE_DIRS =
PLANTUML_JAR_PATH =
DOT_GRAPH_MAX_NODES = 50
MAX_DOT_GRAPH_DEPTH = 0
DOT_TRANSPARENT = NO
DOT_MULTI_TARGETS = NO
GENERATE_LEGEND = YES
DOT_CLEANUP = YES

57
docs/build_notes_android.md

@ -0,0 +1,57 @@
Сборка для Android
==================
There are two versions: with QT and without QT.
Pre-requesties
--------------
You need to install Android SDK, NDK and QT with android support.
- [SDK](https://developer.android.com/studio/index.html) (choose command line tools only)
- [NDK](https://developer.android.com/ndk/downloads/index.html)
- [QT](https://www.qt.io/download-open-source/)(for QT only). Choose one for your platform for android. For example QT 5.6 under Linux would be [this file](http://download.qt.io/official_releases/qt/5.6/5.6.1-1/qt-opensource-linux-x64-android-5.6.1-1.run )
You also need Java JDK and Ant.
QT-Creator (for QT only)
------------------------
Open QT-creator that should be installed with QT.
Go to Settings/Anndroid and specify correct paths to SDK and NDK.
If everything is correct you will see two set avaiable:
Android for armeabi-v7a (gcc, qt) and Android for x86 (gcc, qt).
Dependencies
--------------
Take following pre-compiled binaries from PurpleI2P's repositories.
```bash
git clone https://github.com/PurpleI2P/Boost-for-Android-Prebuilt.git
git clone https://github.com/PurpleI2P/OpenSSL-for-Android-Prebuilt.git
git clone https://github.com/PurpleI2P/MiniUPnP-for-Android-Prebuilt.git
git clone https://github.com/PurpleI2P/android-ifaddrs.git
```
Building the app with QT
------------------------
- Open qt/i2pd_qt/i2pd_qt.pro in the QT-creator
- Change line MAIN_PATH = /path/to/libraries to an actual path where you put the dependancies to
- Select appropriate project (usually armeabi-v7a) and build
- You will find an .apk file in android-build/bin folder
Building the app without QT
---------------------------
- Change line I2PD_LIBS_PATH in android/jni/Application.mk to an actual path where you put the dependancies to
- Run 'ndk-build -j4' from andorid folder
- Create or edit file 'local.properties'. Place 'sdk.dir=<path to SDK>' and 'ndk.dir=<path to NDK>'
- Run 'ant clean debug'
Creating release .apk
----------------------
In order to create release .apk you must obtain a Java keystore file(.jks). Either you have in already, or you can generate it yourself using keytool, or from one of you existing well-know ceritificates. For example, i2pd release are signed with this [certificate](https://github.com/PurpleI2P/i2pd/blob/openssl/contrib/certificates/router/orignal_at_mail.i2p.crt).
Create file 'ant.propeties'
key.store='path to keystore file'
key.alias='alias name'
key.store.password='keystore password'
key.alias.password='alias password'
Run 'ant clean release'

75
docs/build_notes_cross.md

@ -0,0 +1,75 @@
Кросс-компиляция
================
Static 64 bit windows binary on Ubuntu 15.10 (Wily Werewolf)
---------------------------------------------------------------------
Install cross compiler and friends
```sh
sudo apt-get install g++-mingw-w64-x86-64
```
Default is to use Win32 threading model which lacks std::mutex and such. So we change defaults
```sh
sudo update-alternatives --set x86_64-w64-mingw32-g++ /usr/bin/x86_64-w64-mingw32-g++-posix
```
From now on we assume we have everything in `~/dev/`. Get Boost sources unpacked into `~/dev/boost_1_60_0/`
and change directory to it.
Now add out cross compiler configuration. Warning: the following will wipe out whatever you had in there.
```sh
echo "using gcc : mingw : x86_64-w64-mingw32-g++ ;" > ~/user-config.jam
```
Proceed with building Boost normal way, but let's define dedicated staging directory
```sh
./bootstrap.sh
./b2 toolset=gcc-mingw target-os=windows variant=release link=static runtime-link=static address-model=64 \
--build-type=minimal --with-filesystem --with-program_options --with-date_time \
--stagedir=stage-mingw-64
cd ..
```
Now we get & build OpenSSL
```sh
git clone https://github.com/openssl/openssl
cd openssl
git checkout OpenSSL_1_0_2g
./Configure mingw64 no-rc2 no-rc4 no-rc5 no-idea no-bf no-cast no-whirlpool no-md2 no-md4 no-ripemd no-mdc2 \
no-camellia no-seed no-comp no-krb5 no-gmp no-rfc3779 no-ec2m no-ssl2 no-jpake no-srp no-sctp no-srtp \
--prefix=~/dev/stage --cross-compile-prefix=x86_64-w64-mingw32-
make depend
make
make install
cd ..
```
and Zlib
```sh
git clone https://github.com/madler/zlib
cd zlib
git checkout v1.2.8
CC=x86_64-w64-mingw32-gcc CFLAGS=-O3 ./configure --static --64 --prefix=~/dev/stage
make
make install
cd ..
```
Now we prepare cross toolchain hint file for CMake, let's name it `~/dev/toolchain-mingw.cmake`
```cmake
SET(CMAKE_SYSTEM_NAME Windows)
SET(CMAKE_C_COMPILER x86_64-w64-mingw32-gcc)
SET(CMAKE_CXX_COMPILER x86_64-w64-mingw32-g++)
SET(CMAKE_RC_COMPILER x86_64-w64-mingw32-windres)
SET(CMAKE_FIND_ROOT_PATH /usr/x86_64-w64-mingw32)
set(CMAKE_FIND_ROOT_PATH_MODE_PROGRAM NEVER)
```
Download miniupnpc, unpack, and symlink it into `~/dev/miniupnpc/`.
Finally, we can build i2pd with all that goodness
```sh
git clone https://github.com/PurpleI2P/i2pd
mkdir i2pd-mingw-64-build
cd i2pd-mingw-64-build
BOOST_ROOT=~/dev/boost_1_60_0 cmake -G 'Unix Makefiles' ~/dev/i2pd/build -DBUILD_TYPE=Release \
-DCMAKE_TOOLCHAIN_FILE=~/dev/toolchain-mingw.cmake -DWITH_AESNI=ON -DWITH_UPNP=ON -DWITH_STATIC=ON \
-DWITH_HARDENING=ON -DCMAKE_INSTALL_PREFIX:PATH=~/dev/i2pd-mingw-64-static \
-DZLIB_ROOT=~/dev/stage -DBOOST_LIBRARYDIR:PATH=~/dev/boost_1_60_0/stage-mingw-64/lib \
-DOPENSSL_ROOT_DIR:PATH=~/dev/stage
make
x86_64-w64-mingw32-strip i2pd.exe
```
By now, you should have a release build with stripped symbols.

85
docs/build_notes_ios.md

@ -0,0 +1,85 @@
Сборка для iOS
==============
How to build i2pd for iOS 9 and iOS Simulator 386/x64
Prerequisites
--------------
XCode7+, cmake 3.2+
Dependencies
--------------
- precompiled openssl
- precompiled boost with modules `filesystem`, `program_options`, `date_time` and `system`
- ios-cmake toolchain from https://github.com/vovasty/ios-cmake.git
Building
------------------------
Assume you have folder structure
```
lib
libboost_date_time.a
libboost_filesystem.a
libboost_program_options.a
libboost_system.a
libboost.a
libcrypto.a
libssl.a
include
boost
openssl
ios-cmake
i2pd
```
```bash
mkdir -p build/simulator/lib build/ios/lib include/i2pd
pushd build/simulator && \
cmake -DIOS_PLATFORM=SIMULATOR \
-DPATCH=/usr/bin/patch \
-DCMAKE_BUILD_TYPE=Release \
-DCMAKE_TOOLCHAIN_FILE=../../ios-cmake/toolchain/iOS.cmake \
-DWITH_STATIC=yes \
-DWITH_BINARY=no \
-DBoost_INCLUDE_DIR=../../include \
-DOPENSSL_INCLUDE_DIR=../../include \
-DBoost_LIBRARY_DIR=../../lib \
-DOPENSSL_SSL_LIBRARY=../../lib/libssl.a \
-DOPENSSL_CRYPTO_LIBRARY=../../lib/libcrypto.a \
../../i2pd/build && \
make -j16 VERBOSE=1 && \
popd
pushd build/ios
cmake -DIOS_PLATFORM=OS \
-DPATCH=/usr/bin/patch \
-DCMAKE_BUILD_TYPE=Release \
-DCMAKE_TOOLCHAIN_FILE=../../ios-cmake/toolchain/iOS.cmake \
-DWITH_STATIC=yes \
-DWITH_BINARY=no \
-DBoost_INCLUDE_DIR=../../include \
-DOPENSSL_INCLUDE_DIR=../../include \
-DBoost_LIBRARY_DIR=../../lib \
-DOPENSSL_SSL_LIBRARY=../../lib/libssl.a \
-DOPENSSL_CRYPTO_LIBRARY=../../lib/libcrypto.a \
../../i2pd/build && \
make -j16 VERBOSE=1 && \
popd
libtool -static -o lib/libi2pdclient.a build/*/libi2pdclient.a
libtool -static -o lib/libi2pd.a build/*/libi2pd.a
cp i2pd/*.h include/i2pd
```
Include into project
---------------------------
1. add all libraries in `lib` folder to `Project linked frameworks`.
2. add `libc++` and `libz` libraries from system libraries to `Project linked frameworks`.
3. add path to i2p headers to your `Headers search paths`
Alternatively you may use swift wrapper https://github.com/vovasty/SwiftyI2P.git

147
docs/build_notes_unix.md

@ -0,0 +1,147 @@
Сборка на Unix системах
=======================
First of all we need to make sure that all dependencies are satisfied.
This doc is trying to cover:
* [Debian/Ubuntu](#debianubuntu) (contains packaging instructions)
* [Fedora/Centos](#fedoracentos)
* [FreeBSD](#freebsd)
Make sure you have all required dependencies for your system successfully installed.
If so then we are ready to go!
Let's clone the repository and start building the i2pd:
```bash
git clone https://github.com/PurpleI2P/i2pd.git
cd i2pd/build
cmake -DCMAKE_BUILD_TYPE=Release # more options could be passed, see "CMake Options"
make # you may add VERBOSE=1 to cmdline for debugging
```
After successfull build i2pd could be installed with:
```bash
make install
```
or you can just use 'make' once you have all dependencies (boost and openssl) installed
```bash
git clone https://github.com/PurpleI2P/i2pd.git
cd i2pd
make
```
Debian/Ubuntu
-------------
You will need a compiler and other tools that could be installed with `build-essential` package:
```bash
sudo apt-get install build-essential
```
Also you will need a bunch of development libraries:
```bash
sudo apt-get install \
libboost-chrono-dev \
libboost-date-time-dev \
libboost-filesystem-dev \
libboost-program-options-dev \
libboost-system-dev \
libboost-thread-dev \
libssl-dev
```
If you need UPnP support (don't forget to run CMake with `WITH_UPNP=ON`) miniupnpc development library should be installed:
```bash
sudo apt-get install libminiupnpc-dev
```
You may also build deb-package with the following:
```bash
sudo apt-get install fakeroot devscripts
cd i2pd
debuild --no-tgz-check
```
Fedora/Centos
-------------
You will need a compiler and other tools to perform a build:
```bash
sudo yum install make cmake gcc gcc-c++
```
*Latest Fedora system using [DNF](https://en.wikipedia.org/wiki/DNF_(software)) instead of YUM by default, you may prefer to use DNF, but YUM should be ok*
> *Centos 7 has CMake 2.8.11 in the official repositories that too old to build i2pd, CMake >=2.8.12 is required*
> You could build CMake for Centos manualy(WARNING there are a lot of build dependencies!):
> ```bash
> wget https://kojipkgs.fedoraproject.org/packages/cmake/2.8.12/3.fc21/src/cmake-2.8.12-3.fc21.src.rpm
> yum-builddep cmake-2.8.12-3.fc21.src.rpm
> rpmbuild --rebuild cmake-2.8.12-3.fc21.src.rpm
> yum install ~/rpmbuild/RPMS/x86_64/cmake-2.8.12-3.el7.centos.x86_64.rpm
> ```
Also you will need a bunch of development libraries
```bash
sudo yum install boost-devel openssl-devel
```
If you need UPnP support (don't forget to run CMake with `WITH_UPNP=ON`) miniupnpc development library should be installed:
```bash
miniupnpc-devel
```
MAC OS X
--------
Requires homebrew
```bash
brew install libressl boost
```
Then build:
```bash
make HOMEBREW=1
```
FreeBSD
-------
For 10.X use clang. You would also need boost and openssl ports.
Type gmake, it invokes Makefile.bsd, make necessary changes there is required.
Branch 9.X has gcc v4.2, that knows nothing about required c++11 standart.
Required ports:
* `devel/cmake`
* `devel/boost-libs`
* `lang/gcc47`(or later version)
To use newer compiler you should set these variables(replace "47" with your actual gcc version):
```bash
export CC=/usr/local/bin/gcc47
export CXX=/usr/local/bin/g++47
```
CMake Options
-------------
Available CMake options(each option has a form of `<key>=<value>`, for more information see `man 1 cmake`):
* `CMAKE_BUILD_TYPE` build profile (Debug/Release)
* `WITH_BINARY` build i2pd itself
* `WITH_LIBRARY` build libi2pd
* `WITH_STATIC` build static versions of library and i2pd binary
* `WITH_UPNP` build with UPnP support (requires libupnp)
* `WITH_AESNI` build with AES-NI support (ON/OFF)
* `WITH_HARDENING` enable hardening features (ON/OFF) (gcc only)
* `WITH_PCH` use pre-compiled header (experimental, speeds up build)
Also there is `-L` flag for CMake that could be used to list current cached options:
```bash
cmake -L
```

197
docs/build_notes_windows.md

@ -0,0 +1,197 @@
Сборка на Windows
=================
There are two approaches available to build i2pd on Windows. The best
one depends on your needs and personal preferences. One is to use
msys2 and [unix alike infrastructure](build_notes_unix.md). Another
one is to use Visual Studio. While there might be no difference for
end users of i2pd daemon, developers, however, shall be wary of
differences in C++ name mangling between the two compilers when making
a choice to be able to link their software against libi2pd.
If you are a stranger to C++ with no development tools installed on
your system and your only goal is to have i2pd up and running from the
most recent source, consider using msys2. Although it relies on
command line operations, it should be straight forward.
In this guide, we will use CMake for both approaches and we will
assume that you typically have your projects in C:\dev\ as your
development location for the sake of convenience. Adjust paths
accordingly if it is not the case. Note that msys uses unix-alike
paths like /c/dev/ for C:\dev\.
msys2
-----
### x86 (32-bit architecture)
Get install file msys2-i686-*.exe from https://msys2.github.io.
open MSYS2 Shell (from Start menu).
Install all prerequisites and download i2pd source:
```bash
pacman -S mingw-w64-i686-boost mingw-w64-i686-openssl mingw-w64-i686-gcc git make
mkdir -p /c/dev/i2pd
cd /c/dev/i2pd
git clone https://github.com/PurpleI2P/i2pd.git
cd i2pd
export PATH=/mingw32/bin:/usr/bin # we need compiler on PATH which is usually heavily cluttered on Windows
make
```
### x64 (64-bit architecture)
Get install file msys2-x86_64-*.exe from https://msys2.github.io.
open MSYS2 Shell (from Start menu).
Install all prerequisites and download i2pd source:
```bash
pacman -S mingw-w64-x86_64-boost mingw-w64-x86_64-openssl mingw-w64-x86_64-gcc git make
mkdir -p /c/dev/i2pd
cd /c/dev/i2pd
git clone https://github.com/PurpleI2P/i2pd.git
cd i2pd
export PATH=/mingw64/bin:/usr/bin # we need compiler on PATH which is usually heavily cluttered on Windows
make
```
### Caveats
It is important to restrict PATH as described above. If you have
Strawberry Perl and/or Mercurial installed, it will pick up gcc &
openssl from the wrong places.
If you do use precompiled headers to speed up compilation
(recommended), things can go wrong if compiler options have changed
for whatever reason. Just delete `stdafx.h.gch` found in your build
folder, note the file extension.
If you are an Arch Linux user, refrain from updating system with
`pacman -Syu`. Always update runtime separately as described on the
home page, otherwise you might end up with DLLs incompatibility
problems.
### AES-NI
If your processor has
[AES instruction set](https://en.wikipedia.org/wiki/AES_instruction_set),
you use `make USE_AESNI=1`. No check is done however, it
will compile, but it might crash with `Illegal instruction` if not supported.
You should be able to run ./i2pd . If you need to start from the new
shell, consider starting *MinGW-w64 Win32 Shell* instead of *MSYS2 Shell* as
it adds`/minw32/bin` to the PATH.
### UPnP
You can install it through the MSYS2
and build with USE_UPNP key.
```bash
pacman -S mingw-w64-i686-miniupnpc
make USE_UPNP=yes
```
or
```bash
pacman -S mingw-w64-x86_64-miniupnpc
make USE_UPNP=yes
```
Using Visual Studio
-------------------
Requirements for building:
* [CMake](https://cmake.org/) (tested with 3.1.3)
* [Visual Studio Community Edition](https://www.visualstudio.com/en-us/products/visual-studio-community-vs.aspx) (tested with VS2013 Update 4)
* [Boost](http://www.boost.org/) (tested with 1.59)
* Optionally [MiniUPnP](http://miniupnp.free.fr) (tested with 1.9), we need only few client headers
* OpenSSL (tested with 1.0.1p and 1.0.2e), if building from sources (recommended), you'll need as well
* [Netwide assembler](http://www.nasm.us/)
* Strawberry Perl or ActiveState Perl, do NOT try msys2 perl, it won't work
### Building Boost
Open a Command Prompt (there is no need to start Visual Studio command
prompt to build Boost) and run the following:
cd C:\dev\boost
bootstrap
b2 toolset=msvc-12.0 --build-type=complete --with-filesystem --with-program_options --with-date_time
If you are on 64-bit Windows and you want to build 64-bit version as well
b2 toolset=msvc-12.0 --build-type=complete --stagedir=stage64 address-model=64 --with-filesystem --with-program_options --with-date_time
After Boost is compiled, set the environment variable `BOOST_ROOT` to
the directory Boost was unpacked to, e.g., C:\dev\boost.
If you are planning on building only particular variant, e.g. Debug
only and static linking, and/or you are out of space/time, you might
consider `--build-type=minimal`. Take a look at
[appveyor.yml](../appveyor.yml) for details on how test builds are done.
### Building OpenSSL
Download OpenSSL, e.g. with git
git clone https://github.com/openssl/openssl.git
cd openssl
git checkout OpenSSL_1_0_1p
Now open Visual Studio command prompt and change directory to that with OpenSSL
set "PATH=%PATH%;C:\Program Files (x86)\nasm"
perl Configure VC-WIN32 --prefix=c:\OpenSSL-Win32
ms\do_nasm
nmake -f ms\ntdll.mak
nmake -f ms\ntdll.mak install
You should have it installed into C:\OpenSSL-Win32 by now.
Note that you might consider providing `-DOPENSSL_ROOT_DIR` to CMake
and/or create a symlink (with mklink /J) to C:\OpenSSL if you plan on
maintaining multiple versions, e.g. 64 bit and/or
static/shared. Consult `C:\Program Files
(x86)\CMake\share\cmake-3.3\Modules\FindOpenSSL.cmake` for details.
### Get miniupnpc
If you are behind a UPnP enabled router and don't feel like manually
configuring port forwarding, you should consider using
[MiniUPnP](http://miniupnp.free.fr) client. I2pd can be built capable
of using miniupnpc shared library (DLL) to open up necessary
port. You'd want to have include headers around to build i2pd with
support for this. Unpack client source code in a sibling folder,
e.g. C:\dev\miniupnpc . You may want to remove version number from
folder name included in downloaded archive.
### Creating Visual Studio project
Start CMake GUI, navigate to i2pd directory, choose building directory, e.g. ./out, and configure options.
Alternatively, if you feel adventurous, try that from the command line
```
cd <i2pd_dir>
mkdir out
cd out
cmake ..\build -G "Visual Studio 12 2013" -DWITH_UPNP=ON -DWITH_PCH=ON -DCMAKE_INSTALL_PREFIX:PATH=C:\dev\Debug_Win32_stage
```
WITH_UPNP will stay off, if necessary files are not found.
### Building i2pd
You can open generated solution/project with Visual Studio and build
from there, alternatively you can use `cmake --build . --config Release --target install` or
[MSBuild tool](https://msdn.microsoft.com/en-us/library/dd293626.aspx)
`msbuild i2pd.sln /p:Configuration=Release`.

15
docs/build_requirements.md

@ -0,0 +1,15 @@
Требования для сборки из исходников
===================================
Linux/FreeBSD/OSX
-----------------
GCC 4.7 or newer, Boost 1.49 or newer, openssl, zlib. Clang can be used instead of GCC.
Windows
-------
VS2013 (known to work with 12.0.21005.1 or newer), Boost 1.46 or newer,
crypto++ 5.62. See Win32/README-Build.txt for instructions on how to build i2pd
and its dependencies.

300
docs/conf.py

@ -0,0 +1,300 @@
# -*- coding: utf-8 -*-
#
# i2pd documentation build configuration file, created by
# sphinx-quickstart on Tue Jan 12 06:26:12 2016.
#
# This file is execfile()d with the current directory set to its
# containing dir.
#
# Note that not all possible configuration values are present in this
# autogenerated file.
#
# All configuration values have a default; values that are commented out
# serve to show the default.
import sys
import os
import shlex
from recommonmark.parser import CommonMarkParser
source_parsers = {
'.md': CommonMarkParser,
}
# Check if on RTD
on_rtd = os.environ.get('READTHEDOCS', None) == 'True'
# If extensions (or modules to document with autodoc) are in another directory,
# add these directories to sys.path here. If the directory is relative to the
# documentation root, use os.path.abspath to make it absolute, like shown here.
#sys.path.insert(0, os.path.abspath('.'))
# -- General configuration ------------------------------------------------
# If your documentation needs a minimal Sphinx version, state it here.
#needs_sphinx = '1.0'
# Add any Sphinx extension module names here, as strings. They can be
# extensions coming with Sphinx (named 'sphinx.ext.*') or your custom
# ones.
extensions = []
# Add any paths that contain templates here, relative to this directory.
#templates_path = ['_templates']
# The suffix(es) of source filenames.
# You can specify multiple suffix as a list of string:
# source_suffix = ['.rst', '.md']
source_suffix = ['.rst', '.md']
# The encoding of source files.
#source_encoding = 'utf-8-sig'
# The master toctree document.
master_doc = 'index'
# General information about the project.
project = u'i2pd'
copyright = u'2016, PurpleI2P team'
author = u'PurpleI2P team'
# The version info for the project you're documenting, acts as replacement for
# |version| and |release|, also used in various other places throughout the
# built documents.
#
# The short X.Y version.
version = u'2.2.0'
# The full version, including alpha/beta/rc tags.
release = u'2.2.0'
# The language for content autogenerated by Sphinx. Refer to documentation
# for a list of supported languages.
#
# This is also used if you do content translation via gettext catalogs.
# Usually you set "language" from the command line for these cases.
language = None
# There are two options for replacing |today|: either, you set today to some
# non-false value, then it is used:
#today = ''
# Else, today_fmt is used as the format for a strftime call.
#today_fmt = '%B %d, %Y'
# List of patterns, relative to source directory, that match files and
# directories to ignore when looking for source files.
exclude_patterns = ['_build']
# The reST default role (used for this markup: `text`) to use for all
# documents.
#default_role = None
# If true, '()' will be appended to :func: etc. cross-reference text.
#add_function_parentheses = True
# If true, the current module name will be prepended to all description
# unit titles (such as .. function::).
#add_module_names = True
# If true, sectionauthor and moduleauthor directives will be shown in the
# output. They are ignored by default.
#show_authors = False
# The name of the Pygments (syntax highlighting) style to use.
pygments_style = 'sphinx'
# A list of ignored prefixes for module index sorting.
#modindex_common_prefix = []
# If true, keep warnings as "system message" paragraphs in the built documents.
#keep_warnings = False
# If true, `todo` and `todoList` produce output, else they produce nothing.
todo_include_todos = False
# -- Options for HTML output ----------------------------------------------
# The theme to use for HTML and HTML Help pages. See the documentation for
# a list of builtin themes.
html_theme = 'default'
if not on_rtd:
try:
import sphinx_rtd_theme
html_theme = 'sphinx_rtd_theme'
html_theme_path = [sphinx_rtd_theme.get_html_theme_path()]
except ImportError:
pass
# Theme options are theme-specific and customize the look and feel of a theme
# further. For a list of options available for each theme, see the
# documentation.
#html_theme_options = {}
# Add any paths that contain custom themes here, relative to this directory.
#html_theme_path = []
# The name for this set of Sphinx documents. If None, it defaults to
# "<project> v<release> documentation".
#html_title = None
# A shorter title for the navigation bar. Default is the same as html_title.
#html_short_title = None
# The name of an image file (relative to this directory) to place at the top
# of the sidebar.
#html_logo = None
# The name of an image file (within the static path) to use as favicon of the
# docs. This file should be a Windows icon file (.ico) being 16x16 or 32x32
# pixels large.
#html_favicon = None
# Add any paths that contain custom static files (such as style sheets) here,
# relative to this directory. They are copied after the builtin static files,
# so a file named "default.css" will overwrite the builtin "default.css".
#html_static_path = ['_static']
# Add any extra paths that contain custom files (such as robots.txt or
# .htaccess) here, relative to this directory. These files are copied
# directly to the root of the documentation.
#html_extra_path = []
# If not '', a 'Last updated on:' timestamp is inserted at every page bottom,
# using the given strftime format.
#html_last_updated_fmt = '%b %d, %Y'
# If true, SmartyPants will be used to convert quotes and dashes to
# typographically correct entities.
#html_use_smartypants = True
# Custom sidebar templates, maps document names to template names.
#html_sidebars = {}
# Additional templates that should be rendered to pages, maps page names to
# template names.
#html_additional_pages = {}
# If false, no module index is generated.
#html_domain_indices = True
# If false, no index is generated.
#html_use_index = True
# If true, the index is split into individual pages for each letter.
#html_split_index = False
# If true, links to the reST sources are added to the pages.
#html_show_sourcelink = True
# If true, "Created using Sphinx" is shown in the HTML footer. Default is True.
#html_show_sphinx = True
# If true, "(C) Copyright ..." is shown in the HTML footer. Default is True.
#html_show_copyright = True
# If true, an OpenSearch description file will be output, and all pages will
# contain a <link> tag referring to it. The value of this option must be the
# base URL from which the finished HTML is served.
#html_use_opensearch = ''
# This is the file name suffix for HTML files (e.g. ".xhtml").
#html_file_suffix = None
# Language to be used for generating the HTML full-text search index.
# Sphinx supports the following languages:
# 'da', 'de', 'en', 'es', 'fi', 'fr', 'hu', 'it', 'ja'
# 'nl', 'no', 'pt', 'ro', 'ru', 'sv', 'tr'
#html_search_language = 'en'
# A dictionary with options for the search language support, empty by default.
# Now only 'ja' uses this config value
#html_search_options = {'type': 'default'}
# The name of a javascript file (relative to the configuration directory) that
# implements a search results scorer. If empty, the default will be used.
#html_search_scorer = 'scorer.js'
# Output file base name for HTML help builder.
htmlhelp_basename = 'i2pddoc'
# -- Options for LaTeX output ---------------------------------------------
latex_elements = {
# The paper size ('letterpaper' or 'a4paper').
#'papersize': 'letterpaper',
# The font size ('10pt', '11pt' or '12pt').
#'pointsize': '10pt',
# Additional stuff for the LaTeX preamble.
#'preamble': '',
# Latex figure (float) alignment
#'figure_align': 'htbp',
}
# Grouping the document tree into LaTeX files. List of tuples
# (source start file, target name, title,
# author, documentclass [howto, manual, or own class]).
latex_documents = [
(master_doc, 'i2pd.tex', u'i2pd Documentation',
u'PurpleI2P team', 'manual'),
]
# The name of an image file (relative to this directory) to place at the top of
# the title page.
#latex_logo = None
# For "manual" documents, if this is true, then toplevel headings are parts,
# not chapters.
#latex_use_parts = False
# If true, show page references after internal links.
#latex_show_pagerefs = False
# If true, show URL addresses after external links.
#latex_show_urls = False
# Documents to append as an appendix to all manuals.
#latex_appendices = []
# If false, no module index is generated.
#latex_domain_indices = True
# -- Options for manual page output ---------------------------------------
# One entry per manual page. List of tuples
# (source start file, name, description, authors, manual section).
man_pages = [
(master_doc, 'i2pd', u'i2pd Documentation',
[author], 1)
]
# If true, show URL addresses after external links.
#man_show_urls = False
# -- Options for Texinfo output -------------------------------------------
# Grouping the document tree into Texinfo files. List of tuples
# (source start file, target name, title, author,
# dir menu entry, description, category)
texinfo_documents = [
(master_doc, 'i2pd', u'i2pd Documentation',
author, 'i2pd', 'One line description of project.',
'Miscellaneous'),
]
# Documents to append as an appendix to all manuals.
#texinfo_appendices = []
# If false, no module index is generated.
#texinfo_domain_indices = True
# How to display URL addresses: 'footnote', 'no', or 'inline'.
#texinfo_show_urls = 'footnote'
# If true, do not generate a @detailmenu in the "Top" node's menu.
#texinfo_no_detailmenu = False

43
docs/config_opts_after_2.3.0.md

@ -0,0 +1,43 @@
Изменения обработки параметров в релизах > 2.3.0
------------------------------------------------
Система параметров отличается от того, что было ранее и достаточно сильно:
* изменения имён и стиля параметров
Все параметры теперь в виде --help (gnu-style), у некоторых есть шорткаты в виде -h (unix-style).
Это касается всех систем, в том числе винды.
--daemon=1 и подобное -> просто --daemon, без параметра. Нет опции - false, есть - true
--notransit=1 -> --notransit, то же что и выше: есть опция - false, нет - true
--v6 -> --ipv6 (первое было похоже на версию какого-то своего протокола, типа socksproxy --v5)
--tunnelscfg -> --tunconf (имя параметра было слишком длинным, cfg переделан на conf - единообразно с --conf)
--sockskeys -> разделён на два, для socks и httpproxy по-отдельности
* поддержка секций в основном конфиге
Выглядит это так:
# основные опции
pidfile = /var/run/i2pd.pid
#
# настройки конкретного модуля
[httproxy]
address = 1.2.3.4
port = 4446
keys = httproxy-keys.dat
# и так далее
[sam]
enabled = no
addresss = 127.0.0.2
# ^^ переопределяется только адрес, остальное берётся из дефолта
Точно так же сейчас работает конфиг туннелей: секция до точки - имя, после - параметр
* поддержка выключения отдельных сервисов "на корню" см sam.enabled и подобное
Это позволило задать дефолт для номера порта и не писать его руками для включения.
* добавлен --help (см #110)
* присутствует некая валидация параметров, --port=abcd - не прокатит, --port=100500 - тоже

148
docs/configuration.md

@ -0,0 +1,148 @@
Настройка i2pd
==============
Command line options
--------------------
Options specified on the command line take precedence over those in the config file.
If you are upgrading your very old router (< 2.3.0) see also [this](config_opts_after_2.3.0.md) page.
* --help - Show builtin help message (default value of option will be shown in braces)
* --conf= - Config file (default: ~/.i2pd/i2pd.conf or /var/lib/i2pd/i2pd.conf)
This parameter will be silently ignored if the specified config file does not exist.
* --tunconf= - Tunnels config file (default: ~/.i2pd/tunnels.conf or /var/lib/i2pd/tunnels.conf)
* --pidfile= - Where to write pidfile (dont write by default)
* --log= - Logs destination: stdout, file (stdout if not set, file - otherwise, for compatibility)
* --logfile= - Path to logfile (default - autodetect)
* --loglevel= - Log messages above this level (debug, info, warn, error)
* --datadir= - Path to storage of i2pd data (RI, keys, peer profiles, ...)
* --host= - Router external IP for incoming connections
* --port= - Port to listen for incoming connections (default: auto)
* --daemon - Router will go to background after start
* --service - Router will use system folders like '/var/lib/i2pd'
* --ipv6 - Enable communication through ipv6. false by default
* --notransit - Router will not accept transit tunnels at startup. false by default
* --floodfill - Router will be floodfill. false by default
* --bandwidth= - Bandwidth limit: integer in KBps or letters: L (32), O (256), P (2048), X (>9000)
* --family= - Name of a family, router belongs to
Windows-specific options:
* --svcctl= - Windows service management (--svcctl="install" or --svcctl="remove")
* --insomnia - Prevent system from sleeping
* --close= - Action on close: minimize, exit, ask
All options below still possible in cmdline, but better write it in config file:
* --http.address= - The address to listen on (HTTP server)
* --http.port= - The port to listen on (HTTP server)
* --http.auth - Enable basic HTTP auth for webconsole
* --http.user= - Username for basic auth (default: i2pd)
* --http.pass= - Password for basic auth (default: random, see logs)
* --httpproxy.address= - The address to listen on (HTTP Proxy)
* --httpproxy.port= - The port to listen on (HTTP Proxy) 4444 by default
* --httpproxy.keys= - optional keys file for proxy local destination (both HTTP and SOCKS)
* --httpproxy.enabled= - If HTTP proxy is enabled. true by default
* --socksproxy.address= - The address to listen on (SOCKS Proxy)
* --socksproxy.port= - The port to listen on (SOCKS Proxy). 4447 by default
* --socksproxy.keys= - optional keys file for proxy local destination (both HTTP and SOCKS)
* --socksproxy.enabled= - If SOCKS proxy is enabled. true by default
* --socksproxy.outproxy= - Address of outproxy. requests outside i2p will go there
* --socksproxy.outproxyport= - Outproxy remote port
* --sam.address= - The address to listen on (SAM bridge)
* --sam.port= - Port of SAM bridge. Usually 7656. SAM is off if not specified
* --sam.enabled= - If SAM is enabled. false by default
* --bob.address= - The address to listen on (BOB command channel)
* --bob.port= - Port of BOB command channel. Usually 2827. BOB is off if not specified
* --bob.enabled= - If BOB is enabled. false by default
* --i2cp.address= - The address to listen on or an abstract address for Android LocalSocket
* --i2cp.port= - Port of I2CP server. Usually 7654. Ignored for Andorid
* --i2cp.enabled= - If I2CP is enabled. false by default. Other services don't require I2CP
* --i2pcontrol.address= - The address to listen on (I2P control service)
* --i2pcontrol.port= - Port of I2P control service. Usually 7650. I2PControl is off if not specified
* --i2pcontrol.enabled= - If I2P control is enabled. false by default
* --upnp.enabled= - Enable or disable UPnP, false by default for CLI and true for GUI (Windows, Android)
* --upnp.name= - Name i2pd appears in UPnP forwardings list. I2Pd by default
* --precomputation.elgamal= - Use ElGamal precomputated tables. false for x64 and true for other platforms by default
* --reseed.verify= - Request SU3 signature verification
* --reseed.file= - Full path to SU3 file to reseed from
* --reseed.urls= - Reseed URLs, separated by comma
* --addressbook.defaulturl= - AddressBook subscription URL for initial setup
* --addressbook.subscriptions= - AddressBook subscriptions URLs, separated by comma
* --limits.transittunnels= - Override maximum number of transit tunnels. 2500 by default
Config files
------------
INI-like, syntax is the following : <key> = <value>.
Comments are "#", not ";" as you may expect. See [boost ticket](https://svn.boost.org/trac/boost/ticket/808)
All command-line parameters are allowed as keys, but note for those which contains dot (.).
For example:
i2pd.conf:
# comment
log = true
ipv6 = true
# settings for specific module
[httpproxy]
port = 4444
# ^^ this will be --httproxy.port= in cmdline
# another comment
[sam]
enabled = true
See also commented config with examples of all options in ``docs/i2pd.conf``.
tunnels.conf:
# outgoing tunnel sample, to remote service
# mandatory parameters:
# * type -- always "client"
# * port -- local port to listen to
# * destination -- i2p hostname
# optional parameters (may be omitted)
# * keys -- our identity, if unset, will be generated on every startup,
# if set and file missing, keys will be generated and placed to this file
# * address -- local interface to bind
# * signaturetype -- signature type for new destination. 0 (DSA/SHA1), 1 (EcDSA/SHA256) or 7 (EdDSA/SHA512)
[IRC]
type = client
address = 127.0.0.1
port = 6668
destination = irc.postman.i2p
keys = irc-keys.dat
#
# incoming tunnel sample, for local service
# mandatory parameters:
# * type -- "server" or "http"
# * host -- ip address of our service
# * port -- port of our service
# * keys -- file with LeaseSet of address in i2p
# optional parameters (may be omitted)
# * inport -- optional, i2p service port, if unset - the same as 'port'
# * accesslist -- comma-separated list of i2p addresses, allowed to connect
# every address is b32 without '.b32.i2p' part
[LOCALSITE]
type = http
host = 127.0.0.1
port = 80
keys = site-keys.dat
#
[IRC-SERVER]
type = server
host = 127.0.0.1
port = 6667
keys = irc.dat
Also see [this page](https://github.com/PurpleI2P/i2pd/wiki/tunnels.cfg) for more tunnel examples.

36
docs/family.md

@ -0,0 +1,36 @@
Настройка Family
================
Your might want to specify a family, your router belongs to.
There are two possibilities: create new family or joing to existing.
New family
-----------
You must create family self-signed certificate and key.
The only key type supposted is prime256v1.
Use the following list of commands:
openssl ecparam -name prime256v1 -genkey -out <your family name>.key
openssl req -new -key <your family name>.key -out <your family name>.csr
touch v3.ext
openssl x509 -req -days 3650 -in <your family name>.csr -signkey <your family name>.key -out <your family name>.crt -extfile v3.ext
Specify <your family name>.family.i2p.net for CN (Common Name) when requested.
Once you are done with it place <your-family-name>.key and <your-family-name>.crt to <ip2d data>/family folder (for exmple ~/.i2pd/family).
You should provide these two files to other members joining your family.
If you want to register you family and let I2P network recorgnize it, create pull request for you .crt file into contrib/certificate/family.
It will appear in i2pd and I2P next releases packages. Dont place .key file, it must be shared between you family members only.
How to join existing family
---------------------------
Once you and that family agree to do it, they must give you .key and .crt file and you must place in <i2pd datadir>/certificates/family/ folder.
Publish your family
-------------------
Run i2pd with parameter 'family=<your-family-name>', make sure you have <your-family-name>.key and <your-family-name>.crt in your 'family' folder.
If everything is set properly, you router.info will contain two new fields: 'family' and 'family.sig'.
Otherwise your router will complain on startup with log messages starting with "Family:" prefix and severity 'warn' or 'error'.

164
docs/i2pd.conf

@ -0,0 +1,164 @@
## Configuration file for a typical i2pd user
## See https://i2pd.readthedocs.org/en/latest/configuration.html
## for more options you can use in this file.
## Lines that begin with "## " try to explain what's going on. Lines
## that begin with just "#" are disabled commands: you can enable them
## by removing the "#" symbol.
## Tunnels config file
## Default: ~/.i2pd/tunnels.conf or /var/lib/i2pd/tunnels.conf
# tunconf = /var/lib/i2pd/tunnels.conf
## Where to write pidfile (don't write by default)
# pidfile = /var/run/i2pd.pid
## Logging configuration section
## By default logs go to stdout with level 'info' and higher
##
## Logs destination (valid values: stdout, file, syslog)
## * stdout - print log entries to stdout
## * file - log entries to a file
## * syslog - use syslog, see man 3 syslog
# log = file
## Path to logfile (default - autodetect)
# logfile = /var/log/i2pd.log
## Log messages above this level (debug, *info, warn, error)
# loglevel = info
## Path to storage of i2pd data (RI, keys, peer profiles, ...)
## Default: ~/.i2pd or /var/lib/i2pd
# datadir = /var/lib/i2pd
## Daemon mode. Router will go to background after start
# daemon = true
## Run as a service. Router will use system folders like ‘/var/lib/i2pd’
# service = true
## Specify a family, router belongs to (default - none)
# family =
## External IP address to listen for connections
## By default i2pd sets IP automatically
# host = 1.2.3.4
## Port to listen for connections
## By default i2pd picks random port. You MUST pick a random number too,
## don't just uncomment this
# port = 4567
## Enable communication through ipv4
ipv4 = true
## Enable communication through ipv6
ipv6 = false
## Network interface to bind to
# ifname =
## Enable NTCP transport (default = true)
# ntcp = true
## Enable SSU transport (default = true)
# ssu = true
## Should we assume we are behind NAT? (false only in MeshNet)
# nat = true
## Bandwidth configuration
## L limit bandwidth to 32Kbs/sec, O - to 256Kbs/sec, P - to 2048Kbs/sec,
## X - unlimited
## Default is X for floodfill, L for regular node
# bandwidth = L
## Router will not accept transit tunnels at startup
# notransit = true
## Router will be floodfill
# floodfill = true
[limits]
## Maximum active transit sessions (default:2500)
# transittunnels = 2500
[precomputation]
## Enable or disable elgamal precomputation table
## By default, enabled on i386 hosts
# elgamal = true
[upnp]
## Enable or disable UPnP: automatic port forwarding (enabled by default in WINDOWS, ANDROID)
# enabled = false
## Name i2pd appears in UPnP forwardings list (default = I2Pd)
# name = I2Pd
[reseed]
## URLs to request reseed data from, separated by comma
## Default: "mainline" I2P Network reseeds
# urls = https://reseed.i2p-projekt.de/,https://i2p.mooo.com/netDb/,https://netdb.i2p2.no/
## Path to reseed data file (.su3) for manual reseeding
# file = /path/to/i2pseeds.su3
[addressbook]
## AddressBook subscription URL for initial setup
## Default: inr.i2p at "mainline" I2P Network
# defaulturl = http://joajgazyztfssty4w2on5oaqksz6tqoxbduy553y34mf4byv6gpq.b32.i2p/export/alive-hosts.txt
## Optional subscriptions URLs, separated by comma
# subscriptions = http://inr.i2p/export/alive-hosts.txt,http://stats.i2p/cgi-bin/newhosts.txt,http://rus.i2p/hosts.txt
[http]
## Uncomment and set to 'false' to disable Web Console
# enabled = true
## Address and port service will listen on
address = 127.0.0.1
port = 7070
[httpproxy]
## Uncomment and set to 'false' to disable HTTP Proxy
# enabled = true
## Address and port service will listen on
address = 127.0.0.1
port = 4444
## Optional keys file for proxy local destination
# keys = http-proxy-keys.dat
[socksproxy]
## Uncomment and set to 'false' to disable SOCKS Proxy
# enabled = true
## Address and port service will listen on
address = 127.0.0.1
port = 4447
## Optional keys file for proxy local destination
# keys = socks-proxy-keys.dat
## Socks outproxy. Example below is set to use Tor for all connections except i2p
## Address and port of outproxy
# outproxy = 127.0.0.1
# outproxyport = 9050
[sam]
## Uncomment and set to 'true' to enable SAM Bridge
# enabled = false
## Address and port service will listen on
# address = 127.0.0.1
# port = 7656
[bob]
## Uncomment and set to 'true' to enable BOB command channel
# enabled = false
## Address and port service will listen on
# address = 127.0.0.1
# port = 2827
[i2cp]
## Uncomment and set to 'true' to enable I2CP protocol
# enabled = false
## Address and port service will listen on
# address = 127.0.0.1
# port = 7654
[i2pcontrol]
## Uncomment and set to 'true' to enable I2PControl protocol
# enabled = false
## Address and port service will listen on
# address = 127.0.0.1
# port = 7650

42
docs/index.rst

@ -0,0 +1,42 @@
i2pd
====
i2pd (I2P Daemon) это полнофункциональная реализация I2P клиента на языке C++.
* `Сайт <http://i2pd.website>`_
* `GitHub <https://github.com/PurpleI2P/i2pd>`_
* `Вики <https://github.com/PurpleI2P/i2pd/wiki>`_
* `Багтрекер <https://github.com/PurpleI2P/i2pd/issues>`_
* `Twitter <https://twitter.com/i2porignal>`_
Установка
---------
Самый простой способ установить i2pd это использование
`бинарных файлов <https://github.com/PurpleI2P/i2pd/releases/latest>`_.
Инструкции по сборке из исходников для вашей ОС смотрите
в документации.
Использование
-------------
Смотрите в документацию и
`документированный конфигурационный файл <https://github.com/PurpleI2P/i2pd/blob/openssl/docs/i2pd.conf>`_.
Содержание:
-----------
.. toctree::
:maxdepth: 2
build_requirements
build_notes_unix
build_notes_windows
build_notes_cross
build_notes_android
build_notes_ios
configuration
family
usage

BIN
docs/itoopieImage.png

Binary file not shown.

After

Width:  |  Height:  |  Size: 8.5 KiB

3
docs/subscriptions.txt

@ -0,0 +1,3 @@
http://inr.i2p/export/alive-hosts.txt
http://stats.i2p/cgi-bin/newhosts.txt
http://i2p-projekt.i2p/hosts.txt

33
docs/tunnels.conf

@ -0,0 +1,33 @@
[IRC]
type = client
address = 127.0.0.1
port = 6668
destination = irc.postman.i2p
destinationport = 6667
keys = irc-keys.dat
#[SMTP]
#type = client
#address = 127.0.0.1
#port = 7659
#destination = smtp.postman.i2p
#destinationport = 25
#keys = smtp-keys.dat
#[POP3]
#type = client
#address = 127.0.0.1
#port = 7660
#destination = pop.postman.i2p
#destinationport = 110
#keys = pop3-keys.dat
#[MTN]
#type = client
#address = 127.0.0.1
#port = 8998
#destination = mtn.i2p-projekt.i2p
#destinationport = 4691
#keys = mtn-keys.dat
# see more examples in /usr/share/doc/i2pd/configuration.md.gz

131
docs/usage.md

@ -0,0 +1,131 @@
Примеры использования
=====================
i2pd может быть использован для:
* [анонимных веб-сайтов](#browsing-and-hosting-websites)
* [анонимных чатов](#using-and-hosting-chat-servers)
* [анонимного файлообмена](#file-sharing)
и для много чего еще.
## Посещение и создание веб-сайтов
### Посещение анонимных веб-сайтов
Чтобы посещать анонимные веб-сайты внутри Невидимого Интернета, настрой свой веб-браузер на использование HTTP прокси 127.0.0.1:4444 (включено по-умолчанию в i2pd).
В Firefox: Настройки -> Дополнительные -> Сеть -> Соединение -> Настроить -> выберите Ручная настройка сервиса прокси, введите HTTP прокси 127.0.0.1, Порт 4444.
В Chromium: запустите chromium с ключом
chromium --proxy-server="http://127.0.0.1:4444"
Если вы хотите остаться анонимным при посещении веб-сайтов, вам необходимо так же настроить свой веб-браузер для защиты от деанонимизации. Как именно это делается можно найти в интернете, например [здесь](https://habrahabr.ru/post/203680/).
Большой список сайтов Невидимого Интернета на сайте [identiguy.i2p](http://identiguy.i2p).
### Создание анонимных веб-сайтов
Если вы хотите запустить свой сайт в Невидимом Интернете, следуйте данной инструкции:
1) Запустите веб-сервер и узнайте, какой хост:порт он использует (например, 127.0.0.1:8080).
2) Настройте i2pd для создания серверного HTTP туннеля. В файл ~/.i2pd/tunnels.conf добавьте:
[anon-website]
type = http
host = 127.0.0.1
port = 8080
keys = anon-website.dat
3) Перезапустите i2pd.
4) Найдите b32 destination вашего вебсайта.
Зайдите в веб-консоль -> [страница I2P tunnels](http://127.0.0.1:7070/?page=i2p_tunnels). Ищите Sever tunnels и увидете адрес \<длинная строка\>.b32.i2p рядом с anon-website.
Теперь веб-сайт доступен в Невидимом Интернете по этому адресу.
5) (Опционально) Зарегистрируйте короткий и запоминающийся .i2p домен на [inr.i2p](http://inr.i2p).
## Использование и создание чат-серверов
### Запуск анонимного IRC сервера
1) Запустите свой IRC сервер и узнайте, какой хост:порт он использует (например, 127.0.0.1:5555).
Для малых приватных IRC серверов вы можете использовать [miniircd](https://github.com/jrosdahl/miniircd), для больших публичных [UnreadIRCd](https://www.unrealircd.org/).
2) Настройте i2pd для создания серверного IRC туннеля.
В самом простом случае, если ваш сервер не поддерживает WebIRC, добавьте следующее в ~/.i2pd/tunnels.conf:
[anon-chatserver]
type = irc
host = 127.0.0.1
port = 5555
keys = chatserver-key.dat
И этого достаточно.
В случае, если ваш IRC сервер поддерживает WebIRC, например, это UnrealIRCd, добавьте следущее в конфиг UnrealIRCd:
webirc {
mask 127.0.0.1;
password your_password;
};
Также измените строку:
modes-on-connect "+ixw";
на
modes-on-connect "+iw";
И добавьте это в ~/.i2pd/tunnels.conf:
[anon-chatserver]
type = irc
host = 127.0.0.1
port = 5555
keys = chatserver-key.dat
webircpassword = your_password
3) Перезапустите i2pd.
4) Найдите b32 destination вашего анонимного IRC сервера.
Зайдите в веб-консоль -> [страница I2P tunnels](http://127.0.0.1:7070/?page=i2p_tunnels). Ищите Sever tunnels и увидете адрес \<длинная строка\>.b32.i2p рядом с anon-chatserver.
Пользователи будут использовать этот адрес для анонимного подключения к вашему серверу.
### Connect to anonymous IRC server
Чтобы подключиться к IRC серверу по адресу *walker.i2p*, добавьте следущее в ~/.i2pd/tunnels.conf:
[IRC2]
type = client
address = 127.0.0.1
port = 6669
destination = walker.i2p
#keys = walker-keys.dat
Перезапустите i2pd, после чего подключайтесь к irc://127.0.0.1:6669 в вашем IRC клиенте.
## Файлообмен
Вы можете качать и раздавать торренты клиентом [Transmission-I2P](https://github.com/l-n-s/transmission-i2p).
Другие торрент-клиенты [Robert](http://en.wikipedia.org/wiki/Robert_%28P2P_Software%29) и [Vuze](https://en.wikipedia.org/wiki/Vuze).
Robert использует протокол BOB, i2pd должен быть запущен с настройкой --bob.enabled=true.
Vuze использует протокол I2CP, i2pd должен быть запущен с настройкой --i2cp.enabled=true.
Используйте [трекер postman](http://tracker2.postman.i2p).
Loading…
Cancel
Save