GOSTSec/sgminer
1
0
Fork 0
mirror of https://github.com/GOSTSec/sgminer synced 2025-01-16 17:50:05 +00:00
Code Issues Releases Wiki Activity
1,649 Commits 12 Branches 10 Tags
Commit Graph

127 Commits

Author SHA1 Message Date
Con Kolivas
0d083b63f5 Left out an else after the if statement. 2012-02-22 14:52:57 +11:00
Con Kolivas
b77656b78b If we're well below the target temperature, increase gpu engine speed back to maximum in case we have gotten lost between profiles during an idle 
period.
 2012-02-22 14:39:22 +11:00
Con Kolivas
03f4f7e6a6 We should be setting the value of fan_optimal, not its address. 2012-02-22 14:26:29 +11:00
Con Kolivas
083c676378 Revert "Fan control should be fast enough to adjust now without needing to set a high starting speed." 
This reverts commit e69080e987d83c39b50c8dd97829966a48908051.

On 2nd thought, this is still a safe default.
 2012-02-22 10:44:21 +11:00
Con Kolivas
e69080e987 Fan control should be fast enough to adjust now without needing to set a high starting speed. 2012-02-22 10:39:52 +11:00
Con Kolivas
d1cddf8bad Update licensing to GPL V3. 2012-02-21 22:23:07 +11:00
Con Kolivas
02295c69c8 Allow devices that are disabled due to overheating to be flagged as recovering instead of disabling them and re-enable them if they're below ideal 
temperatures and --no-restart has not been set.
 2012-02-19 20:19:47 +11:00
Con Kolivas
810ad04578 More copyright updates. 2012-02-18 23:16:08 +11:00
Con Kolivas
be9db9ce63 Copyright updates. 2012-02-18 23:00:21 +11:00
Con Kolivas
fa4ce8daf2 Keep track of intended engine clock speed and only adjust up if it's higher than the last intended speed. This avoids setting the clock speed to one 
relative to a lower profile one by mistake.
 2012-02-18 22:29:12 +11:00
Con Kolivas
d1cf80a546 Use gpu-memdiff on startup if an engine clockspeed is set and a memdiff value is set. 2012-02-18 19:49:52 +11:00
Con Kolivas
66ea9304af Revert "Adjust engine speed up according to performance level engine setting, not the current engine speed." 
This reverts commit 68217ef6eed95f37da9024f96d098a3114e75c75.

This did not have the desired effect and only added complexity.
 2012-02-18 19:43:23 +11:00
Con Kolivas
c42709745a Revert "Logic fail on engine multiplier." 
This reverts commit b0787e07c88cc5ae9a5a23bbcc004e180e4a24a5.

2nd of 3.
 2012-02-18 19:43:17 +11:00
Con Kolivas
eb5dcc60a0 Revert "Correct yet more logic fail :(" 
This reverts commit 83b76da2c659bbff8d17236ef1b3e69a0ce6228a.

First of 3.
 2012-02-18 19:42:56 +11:00
Con Kolivas
83b76da2c6 Correct yet more logic fail :( 2012-02-13 10:53:03 +11:00
Con Kolivas
b0787e07c8 Logic fail on engine multiplier. 2012-02-13 10:47:05 +11:00
Con Kolivas
68217ef6ee Adjust engine speed up according to performance level engine setting, not the current engine speed. 2012-02-13 10:37:35 +11:00
Con Kolivas
07c2ee5317 Put win32 equivalents of nanosleep and sleep into compat.h fixing sleep() for adl.c. 2012-02-12 17:00:44 +11:00
Con Kolivas
405a2120f8 Remove unnecessary check for opt_debug on every invocation of applog at LOG_DEBUG and place the check in applog(). 2012-02-11 20:11:18 +11:00
Con Kolivas
2b61d973cd Remove the test for whether the device is on the highest profil level before raising the GPU speed as it is ineffectual and may prevent raising the GPU 
speed.
 2012-02-11 19:54:15 +11:00
Luke Dashjr
543265d66a Generalize --temp-cutoff and implement support for reading temperature from BitFORCE FPGAs 2012-02-10 22:14:27 -05:00
Con Kolivas
c72a8b8cc9 Silence ADL warnings. 2012-02-05 22:41:37 +11:00
Con Kolivas
23685aa41e Continue auto-management of fan and engine speeds even if a device is disabled for safety reasons. 2012-02-05 17:28:53 +11:00
Con Kolivas
f8fed37e02 No need to check we're highest performance level when throttling GPU engine speed. 2012-02-05 17:24:26 +11:00
Con Kolivas
af5aaece97 Revert "Pass the correct GPU from the menu to the adl code." 
This reverts commit 7bcda9a28fcaff801ed9ee9e0b6613cbdb3be646.

Corrected for virtual device twice by mistake.
 2012-01-30 21:15:47 +11:00
Con Kolivas
94059c06f4 Ensure all virtual_gpu entries are set when the number of ADL devices does not match the number of OpenCL devices. 2012-01-30 21:07:16 +11:00
Con Kolivas
c9404f4d11 Make sure to set virtual adapters if --dev-reorder is not enabled or device numbers don't match. 2012-01-30 15:33:55 +11:00
Con Kolivas
5a14ec53c8 Add a --dev-reorder option to only reorder devices according to PCI Bus ID when requested. 2012-01-30 15:21:14 +11:00
Con Kolivas
7bcda9a28f Pass the correct GPU from the menu to the adl code. 2012-01-30 12:42:43 +11:00
Con Kolivas
a73156ac76 Display GPU number and device name when ADL is successfully enabled on it. 2012-01-30 10:02:51 +11:00
Con Kolivas
176bbcbc79 Display GPU ordering remapping in verbose mode. 2012-01-30 09:44:19 +11:00
Con Kolivas
891960389e Don't fail in the case the number of ADL and OpenCL devices do not match, and do not attempt to reorder devices unless they match. 
Instead give a warning about the likely cause and the potential consequence of it - Hardware monitoring may NOT match up with devices.
 2012-01-30 09:15:20 +11:00
Con Kolivas
f0746f0b4c Display error codes should ADL not return ADL_OK in the more critical function calls. 2012-01-30 08:18:50 +11:00
Con Kolivas
cdcaaba630 Revert "Add ADL_Overdrive5_ThermalDevices_Enum interface." 
This reverts commit 1e1519e93ec6a3de432dd0b34504675f037c3542.
 2012-01-30 08:06:23 +11:00
Con Kolivas
430a19543e Revert "Read off lpThermalControllerInfo from each ADL device." 
This reverts commit 2d29cdb6117be29ff6353d94a6be0784a588fdb6.
 2012-01-30 08:06:00 +11:00
Con Kolivas
4ae0aad113 Revert "Set iSize for thermal device enum first." 
This reverts commit 990bb4a994261fb0aca8a6bd1b324a3007583207.

Thermal devices is not used. 1st of 3 reverts.
 2012-01-30 08:05:36 +11:00
Con Kolivas
82af288e69 Revert "Fix various harmless warnings." 
This reverts commit a4b67f030fc0c7e2b18e79114a441c1e1617d5f8.
 2012-01-29 22:57:29 +11:00
Con Kolivas
a4b67f030f Fix various harmless warnings. 2012-01-29 21:06:17 +11:00
Con Kolivas
a8e46a074e Add extensive ADL based device info in debug mode. 2012-01-29 20:47:08 +11:00
Con Kolivas
83a8367654 Linux's ADL uses a busnumber in descending order for devices so enumerate them in the opposite order to windows. 2012-01-29 13:49:08 +11:00
Con Kolivas
4bf01f012f Fix potential overflow. 2012-01-28 12:08:55 +11:00
Con Kolivas
059701272c Carry virtual gpu number across. 2012-01-28 11:26:56 +11:00
Con Kolivas
3bc0583454 Iterate and change virtual device order instead of shuffling ram. 2012-01-28 11:19:28 +11:00
Con Kolivas
371e5f688a Reorder displayed devices to map to physical locations and initialise according to logical location instead. 2012-01-28 09:22:33 +11:00
Con Kolivas
5a0b4f62d0 Map GPU devices to virtual devices in their true physical order based on BusNumber. 2012-01-28 01:56:12 +11:00
Con Kolivas
06fd9c4a4c Detect dual GPU cards by iterating through all GPUs, finding ones without fanspeed and matching twins with fanspeed one bus ID apart. 2012-01-26 23:27:10 +11:00
Kano
487327f83d Remove compile warning 2012-01-26 14:06:31 +11:00
ckolivas
4995b7c241 On dual GPUs, only autotune the shared fan once per gpu autotune cycle. 2012-01-25 16:34:39 +11:00
ckolivas
c009c6cd74 Don't try to explicitly drift to exactly the target temperature, aim for just below it. 2012-01-25 16:16:28 +11:00
ckolivas
312724cea1 Adjust fan speed gently while in the optimal range when temperature is drifting to minimise overshoot in either direction. 2012-01-25 15:48:28 +11:00