update russian translation, command-line help, ui

src/init.cpp

@@ -344,7 +344,7 @@ std::string HelpMessage()
         "  -connect=<ip>          " + _("Connect only to the specified node(s)") + "\n" +
         "  -seednode=<ip>         " + _("Connect to a node to retrieve peer addresses, and disconnect") + "\n" +
         "  -externalip=<ip>       " + _("Specify your own public address") + "\n" +
-        "  -onlynet=<net>         " + _("Only connect to nodes in network <net> (IPv4, IPv6 or I2P") + "\n" +
+        "  -onlynet=<net>         " + _("Only connect to nodes in network <net> (IPv4, IPv6 or I2P)") + "\n" +
         "  -discover              " + _("Discover own IP address (default: 1 when listening and no -externalip)") + "\n" +
         "  -checkpoints           " + _("Only accept block chain matching built-in checkpoints (default: 1)") + "\n" +
         "  -listen                " + _("Accept connections from outside (default: 1 if no -proxy or -connect)") + "\n" +
@@ -406,13 +406,13 @@ std::string HelpMessage()
         "  -rpcsslciphers=<ciphers>                 " + _("Acceptable ciphers (default: TLSv1+HIGH:!SSLv2:!aNULL:!eNULL:!AH:!3DES:@STRENGTH)") + "\n"+
 
         "\n"+ _("I2P Options:") + "\n" +
-        "  -generatei2pdestination                " + _("Generate an I2P destination, print it and exit.")+ "\n" +
+        "  -generatei2pdestination " + _("Generate an I2P destination, print it and exit")+ "\n" +
-        "  -i2p=1                        " + _("Enable I2P.") + "\n" +
+        "  -i2p                    " + _("Enable I2P (default: 1)") + "\n" +
-        "  -onlynet=i2p                       " + _("Enable I2P only mode.") + "\n" +
+        "  -onlynet=i2p            " + _("Enable I2P-only mode") + "\n" +
-        "  -i2psessionname=<session name>         " + _("Name of an I2P session. If it is not specified, value will be \"Gostcoin-client\"") + "\n" +
+        "  -i2psessionname=<name>  " + _("Set I2P session name to <name> (default: Gostcoin-client)") + "\n" +
-        "  -samhost=<ip or host name>           " + _("Address of the SAM bridge host. If it is not specified, value will be \"127.0.0.1\".") + "\n" +
+        "  -samhost=<ip>           " + _("Set host where SAM bridge is listening (default: 127.0.0.1)") + "\n" +
-        "  -samport=<port>                    " + _("Port number of the SAM bridge host. If it is not specified, value will be \"7656\".") + "\n" +
+        "  -samport=<port>         " + _("Set port number where SAM bridge is listening (default: 7656)") + "\n" +
-        "  -mydestination=<pub+priv i2p-keys>    " + _("Your full destination (public+private keys). If it is not specified, the client will geneterate a random destination for you. See below (Starting wallet with a permanent i2p-address) more details about this option.") +
+        "  -mydestination=<keys>   " + _("Your full destination (public+private keys) (if it is not specified, the client will geneterate a random destination for you)") +
         "\n";
 
     return strUsage;

src/qt/bitcoingui.cpp

@@ -76,8 +76,8 @@ BitcoinGUI::BitcoinGUI(QWidget *parent) :
     restoreWindowGeometry();
     setWindowTitle(tr("Gostcoin") + " - " + tr("Wallet"));
 #ifndef Q_OS_MAC
-    QApplication::setWindowIcon(QIcon(":icons/bitcoin"));
+    QApplication::setWindowIcon(QIcon(":icons/gostcoin"));
-    setWindowIcon(QIcon(":icons/bitcoin"));
+    setWindowIcon(QIcon(":icons/gostcoin"));
 #else
     setUnifiedTitleAndToolBarOnMac(true);
     QApplication::setAttribute(Qt::AA_DontShowIconsInMenus);
@@ -221,16 +221,16 @@ void BitcoinGUI::createActions()
     quitAction->setStatusTip(tr("Quit application"));
     quitAction->setShortcut(QKeySequence(Qt::CTRL + Qt::Key_Q));
     quitAction->setMenuRole(QAction::QuitRole);
-    aboutAction = new QAction(QIcon(":/icons/bitcoin"), tr("&About Gostcoin"), this);
+    aboutAction = new QAction(QIcon(":/icons/gostcoin"), tr("&About Gostcoin"), this);
     aboutAction->setStatusTip(tr("Show information about Gostcoin"));
     aboutAction->setMenuRole(QAction::AboutRole);
-    aboutQtAction = new QAction(QIcon(":/trolltech/qmessagebox/images/qtlogo-64.png"), tr("About &Qt"), this);
+    aboutQtAction = new QAction(QIcon(":/icons/qtlogo"), tr("About &Qt"), this);
     aboutQtAction->setStatusTip(tr("Show information about Qt"));
     aboutQtAction->setMenuRole(QAction::AboutQtRole);
     optionsAction = new QAction(QIcon(":/icons/options"), tr("&Options..."), this);
     optionsAction->setStatusTip(tr("Modify configuration options for Gostcoin"));
     optionsAction->setMenuRole(QAction::PreferencesRole);
-    toggleHideAction = new QAction(QIcon(":/icons/bitcoin"), tr("&Show / Hide"), this);
+    toggleHideAction = new QAction(QIcon(":/icons/gostcoin"), tr("&Show / Hide"), this);
     toggleHideAction->setStatusTip(tr("Show or hide the main Window"));
 
     encryptWalletAction = new QAction(QIcon(":/icons/lock_closed"), tr("&Encrypt Wallet..."), this);

src/qt/bitcoinstrings.cpp

@@ -49,7 +49,7 @@ QT_TRANSLATE_NOOP("bitcoin-core", ""
 "Execute command when the best block changes (%s in cmd is replaced by block "
 "hash)"),
 QT_TRANSLATE_NOOP("bitcoin-core", ""
-"Listen for JSON-RPC connections on <port> (default: 9377 or testnet: 19377)"),
+"Listen for JSON-RPC connections on <port> (default: 9376 or testnet: 19376)"),
 QT_TRANSLATE_NOOP("bitcoin-core", ""
 "Number of seconds to keep misbehaving peers from reconnecting (default: "
 "86400)"),
@@ -90,6 +90,7 @@ QT_TRANSLATE_NOOP("bitcoin-core", "Accept connections from outside (default: 1 i
 QT_TRANSLATE_NOOP("bitcoin-core", "Add a node to connect to and attempt to keep the connection open"),
 QT_TRANSLATE_NOOP("bitcoin-core", "Allow DNS lookups for -addnode, -seednode and -connect"),
 QT_TRANSLATE_NOOP("bitcoin-core", "Allow JSON-RPC connections from specified IP address"),
+QT_TRANSLATE_NOOP("bitcoin-core", "Allow peers to set bloom filters (default: 1)"),
 QT_TRANSLATE_NOOP("bitcoin-core", "Attempt to recover private keys from a corrupt wallet.dat"),
 QT_TRANSLATE_NOOP("bitcoin-core", "Block creation options:"),
 QT_TRANSLATE_NOOP("bitcoin-core", "Cannot downgrade wallet"),
@@ -104,6 +105,8 @@ QT_TRANSLATE_NOOP("bitcoin-core", "Creating SAM session..."),
 QT_TRANSLATE_NOOP("bitcoin-core", "Discover own IP address (default: 1 when listening and no -externalip)"),
 QT_TRANSLATE_NOOP("bitcoin-core", "Do you want to rebuild the block database now?"),
 QT_TRANSLATE_NOOP("bitcoin-core", "Done loading"),
+QT_TRANSLATE_NOOP("bitcoin-core", "Enable I2P (default: 1)"),
+QT_TRANSLATE_NOOP("bitcoin-core", "Enable I2P-only mode"),
 QT_TRANSLATE_NOOP("bitcoin-core", "Error initializing block database"),
 QT_TRANSLATE_NOOP("bitcoin-core", "Error initializing wallet database environment %s!"),
 QT_TRANSLATE_NOOP("bitcoin-core", "Error loading block database"),
@@ -128,11 +131,13 @@ QT_TRANSLATE_NOOP("bitcoin-core", "Failed to write transaction index"),
 QT_TRANSLATE_NOOP("bitcoin-core", "Failed to write undo data"),
 QT_TRANSLATE_NOOP("bitcoin-core", "Fee per KB to add to transactions you send"),
 QT_TRANSLATE_NOOP("bitcoin-core", "Find peers using DNS lookup (default: 1 unless -connect)"),
+QT_TRANSLATE_NOOP("bitcoin-core", "Generate an I2P destination, print it and exit"),
 QT_TRANSLATE_NOOP("bitcoin-core", "Generate coins (default: 0)"),
 QT_TRANSLATE_NOOP("bitcoin-core", "Get help for a command"),
 QT_TRANSLATE_NOOP("bitcoin-core", "Gostcoin version"),
 QT_TRANSLATE_NOOP("bitcoin-core", "How many blocks to check at startup (default: 288, 0 = all)"),
 QT_TRANSLATE_NOOP("bitcoin-core", "How thorough the block verification is (0-4, default: 3)"),
+QT_TRANSLATE_NOOP("bitcoin-core", "I2P Options:"),
 QT_TRANSLATE_NOOP("bitcoin-core", "Imports blocks from external blk000??.dat file"),
 QT_TRANSLATE_NOOP("bitcoin-core", "Information"),
 QT_TRANSLATE_NOOP("bitcoin-core", "Insufficient funds"),
@@ -147,17 +152,18 @@ QT_TRANSLATE_NOOP("bitcoin-core", "Loading addresses..."),
 QT_TRANSLATE_NOOP("bitcoin-core", "Loading block index..."),
 QT_TRANSLATE_NOOP("bitcoin-core", "Loading wallet..."),
 QT_TRANSLATE_NOOP("bitcoin-core", "Maintain a full transaction index (default: 0)"),
-QT_TRANSLATE_NOOP("bitcoin-core", "Maintain at most <n> connections to peers (default: 125)"),
+QT_TRANSLATE_NOOP("bitcoin-core", "Maintain at most <n> connections to peers (default: 200)"),
 QT_TRANSLATE_NOOP("bitcoin-core", "Maximum per-connection receive buffer, <n>*1000 bytes (default: 5000)"),
 QT_TRANSLATE_NOOP("bitcoin-core", "Maximum per-connection send buffer, <n>*1000 bytes (default: 1000)"),
+QT_TRANSLATE_NOOP("bitcoin-core", "Name of an I2P session (default: Gostcoin-client)"),
 QT_TRANSLATE_NOOP("bitcoin-core", "Not enough file descriptors available."),
 QT_TRANSLATE_NOOP("bitcoin-core", "Only accept block chain matching built-in checkpoints (default: 1)"),
-QT_TRANSLATE_NOOP("bitcoin-core", "Only connect to nodes in network <net> (IPv4, IPv6 or Tor)"),
+QT_TRANSLATE_NOOP("bitcoin-core", "Only connect to nodes in network <net> (IPv4, IPv6 or I2P)"),
 QT_TRANSLATE_NOOP("bitcoin-core", "Options:"),
 QT_TRANSLATE_NOOP("bitcoin-core", "Output extra debugging information. Implies all other -debug* options"),
 QT_TRANSLATE_NOOP("bitcoin-core", "Output extra network debugging information"),
 QT_TRANSLATE_NOOP("bitcoin-core", "Password for JSON-RPC connections"),
-QT_TRANSLATE_NOOP("bitcoin-core", "Prepend debug output with timestamp"),
+QT_TRANSLATE_NOOP("bitcoin-core", "Prepend debug output with timestamp (default: 1)"),
 QT_TRANSLATE_NOOP("bitcoin-core", "Rebuild block chain index from current blk000??.dat files"),
 QT_TRANSLATE_NOOP("bitcoin-core", "Rescan the block chain for missing wallet transactions"),
 QT_TRANSLATE_NOOP("bitcoin-core", "Rescanning..."),
@@ -173,9 +179,12 @@ QT_TRANSLATE_NOOP("bitcoin-core", "Send trace/debug info to debugger"),
 QT_TRANSLATE_NOOP("bitcoin-core", "Server certificate file (default: server.cert)"),
 QT_TRANSLATE_NOOP("bitcoin-core", "Server private key (default: server.pem)"),
 QT_TRANSLATE_NOOP("bitcoin-core", "Set database cache size in megabytes (default: 25)"),
+QT_TRANSLATE_NOOP("bitcoin-core", "Set host where SAM bridge is listening (default: 127.0.0.1)"),
+QT_TRANSLATE_NOOP("bitcoin-core", "Set I2P session name to <name> (default: Gostcoin-client)"),
 QT_TRANSLATE_NOOP("bitcoin-core", "Set key pool size to <n> (default: 100)"),
 QT_TRANSLATE_NOOP("bitcoin-core", "Set maximum block size in bytes (default: 250000)"),
 QT_TRANSLATE_NOOP("bitcoin-core", "Set minimum block size in bytes (default: 0)"),
+QT_TRANSLATE_NOOP("bitcoin-core", "Set port number where SAM bridge is listening (default: 7656)"),
 QT_TRANSLATE_NOOP("bitcoin-core", "Set the number of threads to service RPC calls (default: 4)"),
 QT_TRANSLATE_NOOP("bitcoin-core", "Shrink debug.log file on client startup (default: 1 when no -debug)"),
 QT_TRANSLATE_NOOP("bitcoin-core", "Signing transaction failed"),
@@ -208,5 +217,7 @@ QT_TRANSLATE_NOOP("bitcoin-core", "Wallet needed to be rewritten: restart Gostco
 QT_TRANSLATE_NOOP("bitcoin-core", "wallet.dat corrupt, salvage failed"),
 QT_TRANSLATE_NOOP("bitcoin-core", "Warning"),
 QT_TRANSLATE_NOOP("bitcoin-core", "Warning: This version is obsolete, upgrade required!"),
+QT_TRANSLATE_NOOP("bitcoin-core", "When creating transactions, ignore inputs with value less than this (default: 0.0001)"),
 QT_TRANSLATE_NOOP("bitcoin-core", "You need to rebuild the database using -reindex to change -txindex"),
+QT_TRANSLATE_NOOP("bitcoin-core", "Your full destination (public+private keys) (if it is not specified, the client will geneterate a random destination for you)"),
 };

src/qt/forms/aboutdialog.ui

@@ -63,7 +63,7 @@
           <cursorShape>IBeamCursor</cursorShape>
          </property>
          <property name="text">
-          <string notr="true">0.3.666-beta</string>
+          <string notr="true">v0.8.5.10</string>
          </property>
          <property name="textInteractionFlags">
           <set>Qt::LinksAccessibleByMouse|Qt::TextSelectableByKeyboard|Qt::TextSelectableByMouse</set>
@@ -108,15 +108,16 @@
        </property>
        <property name="text">
         <string>
-This is experimental software.
+&lt;p&gt;This is experimental software.&lt;/p&gt;
-
+&lt;p&gt;Distributed under the MIT/X11 software license, see the accompanying file COPYING or &lt;a href="http://www.opensource.org/licenses/mit-license.php"&gt;http://www.opensource.org/licenses/mit-license.php&lt;/a&gt;.&lt;/p&gt;
-Distributed under the MIT/X11 software license, see the accompanying file COPYING or http://www.opensource.org/licenses/mit-license.php.
+&lt;p&gt;This product includes software developed by the OpenSSL Project for use in the OpenSSL Toolkit (&lt;a href="http://www.openssl.org/"&gt;http://www.openssl.org/&lt;/a&gt;) and cryptographic software written by Eric Young (eay@cryptsoft.com).&lt;/p&gt;</string>
-
-This product includes software developed by the OpenSSL Project for use in the OpenSSL Toolkit (http://www.openssl.org/) and cryptographic software written by Eric Young (eay@cryptsoft.com).</string>
        </property>
        <property name="wordWrap">
         <bool>true</bool>
        </property>
+       <property name="textFormat">
+        <enum>Qt::RichText</enum>
+       </property>
        <property name="textInteractionFlags">
         <set>Qt::LinksAccessibleByMouse|Qt::TextSelectableByKeyboard|Qt::TextSelectableByMouse</set>
        </property>

src/qt/gostcoin.qrc

@@ -1,6 +1,7 @@
 <!DOCTYPE RCC><RCC version="1.0">
     <qresource prefix="/icons">
-        <file alias="bitcoin">res/icons/gostcoin.png</file>
+        <file alias="gostcoin">res/icons/gostcoin.png</file>
+        <file alias="qtlogo">res/icons/qtlogo.png</file>
         <file alias="address-book">res/icons/address-book.png</file>
         <file alias="quit">res/icons/quit.png</file>
         <file alias="send">res/icons/send.png</file>

src/qt/locale/bitcoin_ru.ts

@@ -16,17 +16,13 @@
     <message>
         <location line="+57"/>
         <source>
-This is experimental software.
+&lt;p&gt;This is experimental software.&lt;/p&gt;
-
+&lt;p&gt;Distributed under the MIT/X11 software license, see the accompanying file COPYING or &lt;a href="http://www.opensource.org/licenses/mit-license.php"&gt;http://www.opensource.org/licenses/mit-license.php&lt;/a&gt;.&lt;/p&gt;
-Distributed under the MIT/X11 software license, see the accompanying file COPYING or http://www.opensource.org/licenses/mit-license.php.
+&lt;p&gt;This product includes software developed by the OpenSSL Project for use in the OpenSSL Toolkit (&lt;a href="http://www.openssl.org/"&gt;http://www.openssl.org/&lt;/a&gt;) and cryptographic software written by Eric Young (eay@cryptsoft.com).&lt;/p&gt;</source>
-
-This product includes software developed by the OpenSSL Project for use in the OpenSSL Toolkit (http://www.openssl.org/) and cryptographic software written by Eric Young (eay@cryptsoft.com) and UPnP software written by Thomas Bernard.</source>
         <translation>
-Это экспериментальная программа.
+&lt;p&gt;Это экспериментальная программа.&lt;/p&gt;
-
+&lt;p&gt;Распространяется на правах лицензии MIT/X11, см. файл COPYING или &lt;a href="http://www.opensource.org/licenses/mit-license.php"&gt;http://www.opensource.org/licenses/mit-license.php&lt;/a&gt;.&lt;/p&gt;
-Распространяется на правах лицензии MIT/X11, см. файл COPYING или http://www.opensource.org/licenses/mit-license.php.
+&lt;p&gt;Этот продукт включает ПО, разработанное OpenSSL Project для использования в OpenSSL Toolkit (&lt;a href="http://www.openssl.org/"&gt;http://www.openssl.org/&lt;/a&gt;) и криптографическое ПО, написанное Eric Young (eay@cryptsoft.com).&lt;/p&gt;</translation>
-
-Этот продукт включает ПО, разработанное OpenSSL Project для использования в OpenSSL Toolkit (http://www.openssl.org/) и криптографическое ПО, написанное Eric Young (eay@cryptsoft.com) и ПО для работы с UPnP, написанное Thomas Bernard.</translation>
     </message>
     <message>
         <location filename="../aboutdialog.cpp" line="+14"/>
@@ -1445,6 +1441,57 @@ Address: %4
     </message>
 </context>
 
+<!-- Show I2P address window -->
+<context>
+    <name>ShowI2PAddresses</name>
+    <message>
+        <location filename="../forms/showi2paddresses.ui" line="+40"/>
+        <source>Dialog</source>
+        <translation>Диалог</translation>
+    </message>
+    <message>
+        <location line="+6"/>
+        <source>If you want to use a permanent I2P-address you have to set a &apos;mydestination&apos; option in the configuration file:</source>
+        <translation>Если вы хотите использовать постоянный I2P адрес, добавьте параметр &apos;mydestination&apos; в конфигурационный файл:</translation>
+    </message>
+    <message>
+        <location line="+10"/>
+        <source>Ready to save parameter (If you want to use this address save this text in the configuration file and keep it secret):</source>
+        <translation>Сохраните этот параметр (если вы хотите использовать данный адрес, сохраните этот текст в конфигурационный файл и держите его в сектрете):</translation>
+    </message>
+    <message>
+        <location line="+23"/>
+        <source>Address (you can publish it):</source>
+        <translation>Адрес (вы можете публиковать его):</translation>
+    </message>
+    <message>
+        <location line="+20"/>
+        <source>Short base32-address:</source>
+        <translation>Короткий base32 адрес:</translation>
+    </message>
+    <message>
+        <location line="+22"/>
+        <source>Copy &quot;mydestination&quot; parameter
+to the clipboard</source>
+        <translation>Скопировать параметр &quot;mydestination&quot;
+в буфер обмена</translation>
+    </message>
+    <message>
+        <location line="+8"/>
+        <source>Copy public address
+to the clipboard</source>
+        <translation>Скопировать публичный адрес
+в буфер обмена</translation>
+    </message>
+    <message>
+        <location line="+8"/>
+        <source>Copy b32-address
+to the clipboard</source>
+        <translation>Скопировать b32 адрес
+в буфер обмена</translation>
+    </message>
+</context>
+
 <!-- Overview page -->
 <context>
     <name>OverviewPage</name>
@@ -2856,8 +2903,8 @@ rpcpassword=%s
     </message>
     <message>
         <location line="+3"/>
-        <source>Listen for JSON-RPC connections on &lt;port&gt; (default: 9332 or testnet: 19332)</source>
+        <source>Listen for JSON-RPC connections on &lt;port&gt; (default: 9376 or testnet: 19376)</source>
-        <translation>Прослушивать подключения JSON-RPC на &lt;порту&gt; (по умолчанию: 9332 или для testnet: 19332)</translation>
+        <translation>Прослушивать подключения JSON-RPC на &lt;порту&gt; (по умолчанию: 9376 или для testnet: 19376)</translation>
     </message>
     <message>
         <location line="+2"/>
@@ -2943,6 +2990,11 @@ If the file does not exist, create it with owner-readable-only file permissions.
         <source>Allow JSON-RPC connections from specified IP address</source>
         <translation>Разрешить подключения JSON-RPC с указанного IP</translation>
     </message>
+    <message>
+        <location line="+1"/>
+        <source>Allow peers to set bloom filters (default: 1)</source>
+        <translation>Разрешить пирам устанавливать bloom-фильтры (по умолчанию: 1)</translation>
+    </message>
     <message>
         <location line="+1"/>
         <source>Attempt to recover private keys from a corrupt wallet.dat</source>
@@ -3013,6 +3065,16 @@ If the file does not exist, create it with owner-readable-only file permissions.
         <source>Done loading</source>
         <translation>Загрузка завершена</translation>
     </message>
+    <message>
+        <location line="+1"/>
+        <source>Enable I2P (default: 1)</source>
+        <translation>Включить работу в I2P (по умолчанию: 1)</translation>
+    </message>
+    <message>
+        <location line="+1"/>
+        <source>Enable I2P-only mode</source>
+        <translation>Включить режим работы "только в I2P"</translation>
+    </message>
     <message>
         <location line="+1"/>
         <source>Error initializing block database</source>
@@ -3133,6 +3195,11 @@ If the file does not exist, create it with owner-readable-only file permissions.
         <source>Find peers using DNS lookup (default: 1 unless -connect)</source>
         <translation>Искать узлы с помощью DNS (по умолчанию: 1, если не указан -connect)</translation>
     </message>
+    <message>
+        <location line="+1"/>
+        <source>Generate an I2P destination, print it and exit</source>
+        <translation>Сгенерировать I2P адрес, напечатать его и выйти</translation>
+    </message>
     <message>
         <location line="+1"/>
         <source>Generate coins (default: 0)</source>
@@ -3158,6 +3225,11 @@ If the file does not exist, create it with owner-readable-only file permissions.
         <source>How thorough the block verification is (0-4, default: 3)</source>
         <translation>Насколько тщательно проверять блок (0-4, по умолчанию: 3)</translation>
     </message>
+    <message>
+        <location line="+1"/>
+        <source>I2P Options:</source>
+        <translation>Настройки I2P:</translation>
+    </message>
     <message>
         <location line="+1"/>
         <source>Imports blocks from external blk000??.dat file</source>
@@ -3205,8 +3277,8 @@ If the file does not exist, create it with owner-readable-only file permissions.
     </message>
     <message>
         <location line="+1"/>
-        <source>Listen for connections on &lt;port&gt; (default: 9333 or testnet: 19333)</source>
+        <source>Listen for connections on &lt;port&gt; (default: 9377 or testnet: 19377)</source>
-        <translation>Принимать входящие подключения на &lt;port&gt; (по умолчанию: 9333 или 19333 в тестовой сети)</translation>
+        <translation>Принимать входящие подключения на &lt;port&gt; (по умолчанию: 9377 или 19377 в тестовой сети)</translation>
     </message>
     <message>
         <location line="+1"/>
@@ -3230,8 +3302,8 @@ If the file does not exist, create it with owner-readable-only file permissions.
     </message>
     <message>
         <location line="+1"/>
-        <source>Maintain at most &lt;n&gt; connections to peers (default: 125)</source>
+        <source>Maintain at most &lt;n&gt; connections to peers (default: 200)</source>
-        <translation>Поддерживать не более &lt;n&gt; подключений к узлам (по умолчанию: 125)</translation>
+        <translation>Поддерживать не более &lt;n&gt; подключений к узлам (по умолчанию: 200)</translation>
     </message>
     <message>
         <location line="+1"/>
@@ -3243,6 +3315,11 @@ If the file does not exist, create it with owner-readable-only file permissions.
         <source>Maximum per-connection send buffer, &lt;n&gt;*1000 bytes (default: 1000)</source>
         <translation>Максимальный размер буфера отправки на соединение, &lt;n&gt;*1000 байт (по умолчанию: 1000)</translation>
     </message>
+    <message>
+        <location line="+1"/>
+        <source>Name of an I2P session (default: Gostcoin-client)</source>
+        <translation>Имя I2P сессии (по умолчанию: Gostcoin-client)</translation>
+    </message>
     <message>
         <location line="+1"/>
         <source>Not enough file descriptors available.</source>
@@ -3255,8 +3332,8 @@ If the file does not exist, create it with owner-readable-only file permissions.
     </message>
     <message>
         <location line="+1"/>
-        <source>Only connect to nodes in network &lt;net&gt; (IPv4, IPv6 or Tor)</source>
+        <source>Only connect to nodes in network &lt;net&gt; (IPv4, IPv6 or I2P)</source>
-        <translation>Подключаться только к узлам из сети &lt;net&gt; (IPv4, IPv6 или Tor)</translation>
+        <translation>Подключаться только к узлам из сети &lt;net&gt; (IPv4, IPv6 или I2P)</translation>
     </message>
     <message>
         <location line="+1"/>
@@ -3280,8 +3357,8 @@ If the file does not exist, create it with owner-readable-only file permissions.
     </message>
     <message>
         <location line="+1"/>
-        <source>Prepend debug output with timestamp</source>
+        <source>Prepend debug output with timestamp (default: 1)</source>
-        <translation>Дописывать отметки времени к отладочному выводу</translation>
+        <translation>Дописывать отметки времени к отладочному выводу (по умолчанию: 1)</translation>
     </message>
     <message>
         <location line="+1"/>
@@ -3358,6 +3435,16 @@ If the file does not exist, create it with owner-readable-only file permissions.
         <source>Set database cache size in megabytes (default: 25)</source>
         <translation>Установить размер кэша базы данных в мегабайтах (по умолчанию: 25)</translation>
     </message>
+    <message>
+        <location line="+1"/>
+        <source>Set host where SAM bridge is listening (default: 127.0.0.1)</source>
+        <translation>Указать адрес, на котором слушает SAM мост (по умолчанию: 127.0.0.1)</translation>
+    </message>
+    <message>
+        <location line="+1"/>
+        <source>Set I2P session name to &lt;name&gt; (default: Gostcoin-client)</source>
+        <translation>Установить имя I2P сессии на &lt;name&gt; (по умолчанию: Gostcoin-client)</translation>
+    </message>
     <message>
         <location line="+1"/>
         <source>Set key pool size to &lt;n&gt; (default: 100)</source>
@@ -3373,6 +3460,11 @@ If the file does not exist, create it with owner-readable-only file permissions.
         <source>Set minimum block size in bytes (default: 0)</source>
         <translation>Минимальный размер блока в байтах (по умолчанию: 0)</translation>
     </message>
+    <message>
+        <location line="+1"/>
+        <source>Set port number where SAM bridge is listening (default: 7656)</source>
+        <translation>Указать порт, на котором слушает SAM мост (по умолчанию: 7656)</translation>
+    </message>
     <message>
         <location line="+1"/>
         <source>Set the number of threads to service RPC calls (default: 4)</source>
@@ -3533,10 +3625,20 @@ If the file does not exist, create it with owner-readable-only file permissions.
         <source>Warning: This version is obsolete, upgrade required!</source>
         <translation>Внимание: эта версия устарела, требуется обновление!</translation>
     </message>
+    <message>
+        <location line="+1"/>
+        <source>When creating transactions, ignore inputs with value less than this (default: 0.0001)</source>
+        <translation>Когда создается транзакция, игнорировать ввод с значением ниже указанного (по умолчанию: 0.0001)</translation>
+    </message>
     <message>
         <location line="+1"/>
         <source>You need to rebuild the databases using -reindex to change -txindex</source>
         <translation>Вам необходимо пересобрать базы данных с помощью -reindex, чтобы изменить -txindex</translation>
     </message>
+    <message>
+        <location line="+1"/>
+        <source>Your full destination (public+private keys) (if it is not specified, the client will geneterate a random destination for you)</source>
+        <translation>Ваш полный ключ I2P назначения (публичный+приватный ключи) (если данный параметр не указан, то будут сгенерированы случайные ключи)</translation>
+    </message>
 </context>
 </TS>