Improve commandline output in stats/verbose/debug mode

crawler.go

@@ -30,7 +30,8 @@ func crawlNode(s *dnsseeder, nd *node) {
 	defer crawlEnd(nd)
 
 	if config.debug {
-		log.Printf("debug - start crawl: node %s status: %v:%v lastcrawl: %s\n",
+		log.Printf("%s - debug - start crawl: node %s status: %v:%v lastcrawl: %s\n",
+			s.name,
 			net.JoinHostPort(nd.na.IP.String(),
 				strconv.Itoa(int(nd.na.Port))),
 			nd.status,
@@ -39,7 +40,7 @@ func crawlNode(s *dnsseeder, nd *node) {
 	}
 
 	// connect to the remote ip and ask them for their addr list
-	rna, e := crawlIP(s.pver, s.id, nd, s.isFull())
+	rna, e := s.crawlIP(nd)
 
 	if e != nil {
 		// update the fact that we have not connected to this node
@@ -140,7 +141,7 @@ func crawlEnd(nd *node) {
 }
 
 // crawlIP retrievs a slice of ip addresses from a client
-func crawlIP(pver uint32, netID wire.BitcoinNet, nd *node, full bool) ([]*wire.NetAddress, *crawlError) {
+func (s *dnsseeder) crawlIP(nd *node) ([]*wire.NetAddress, *crawlError) {
 
 	ip := nd.na.IP.String()
 	port := strconv.Itoa(int(nd.na.Port))
@@ -150,14 +151,14 @@ func crawlIP(pver uint32, netID wire.BitcoinNet, nd *node, full bool) ([]*wire.N
 	conn, err := net.DialTimeout("tcp", dialString, time.Second*10)
 	if err != nil {
 		if config.debug {
-			log.Printf("debug - Could not connect to %s - %v\n", ip, err)
+			log.Printf("%s - debug - Could not connect to %s - %v\n", s.name, ip, err)
 		}
 		return nil, &crawlError{"", err}
 	}
 
 	defer conn.Close()
 	if config.debug {
-		log.Printf("debug - Connected to remote address: %s Last connect was %v ago\n", ip, time.Since(nd.lastConnect).String())
+		log.Printf("%s - debug - Connected to remote address: %s Last connect was %v ago\n", s.name, ip, time.Since(nd.lastConnect).String())
 	}
 
 	// set a deadline for all comms to be done by. After this all i/o will error
@@ -170,14 +171,14 @@ func crawlIP(pver uint32, netID wire.BitcoinNet, nd *node, full bool) ([]*wire.N
 		return nil, &crawlError{"Create NewMsgVersionFromConn", err}
 	}
 
-	err = wire.WriteMessage(conn, msgver, pver, netID)
+	err = wire.WriteMessage(conn, msgver, s.pver, s.id)
 	if err != nil {
 		// Log and handle the error
 		return nil, &crawlError{"Write Version Message", err}
 	}
 
 	// first message received should be version
-	msg, _, err := wire.ReadMessage(conn, pver, netID)
+	msg, _, err := wire.ReadMessage(conn, s.pver, s.id)
 	if err != nil {
 		// Log and handle the error
 		return nil, &crawlError{"Read message after sending Version", err}
@@ -187,7 +188,7 @@ func crawlIP(pver uint32, netID wire.BitcoinNet, nd *node, full bool) ([]*wire.N
 	case *wire.MsgVersion:
 		// The message is a pointer to a MsgVersion struct.
 		if config.debug {
-			log.Printf("%s - Remote version: %v\n", ip, msg.ProtocolVersion)
+			log.Printf("%s - debug - %s - Remote version: %v\n", s.name, ip, msg.ProtocolVersion)
 		}
 		// fill the node struct with the remote details
 		nd.version = msg.ProtocolVersion
@@ -205,13 +206,13 @@ func crawlIP(pver uint32, netID wire.BitcoinNet, nd *node, full bool) ([]*wire.N
 	// send verack command
 	msgverack := wire.NewMsgVerAck()
 
-	err = wire.WriteMessage(conn, msgverack, pver, netID)
+	err = wire.WriteMessage(conn, msgverack, s.pver, s.id)
 	if err != nil {
 		return nil, &crawlError{"writing message VerAck", err}
 	}
 
 	// second message received should be verack
-	msg, _, err = wire.ReadMessage(conn, pver, netID)
+	msg, _, err = wire.ReadMessage(conn, s.pver, s.id)
 	if err != nil {
 		return nil, &crawlError{"reading expected Ver Ack from remote client", err}
 	}
@@ -219,7 +220,7 @@ func crawlIP(pver uint32, netID wire.BitcoinNet, nd *node, full bool) ([]*wire.N
 	switch msg.(type) {
 	case *wire.MsgVerAck:
 		if config.debug {
-			log.Printf("%s - received Version Ack\n", ip)
+			log.Printf("%s - debug - %s - received Version Ack\n", s.name, ip)
 		}
 	default:
 		return nil, &crawlError{"Did not receive expected Ver Ack message from remote client", errors.New("")}
@@ -227,13 +228,13 @@ func crawlIP(pver uint32, netID wire.BitcoinNet, nd *node, full bool) ([]*wire.N
 
 	// if we get this far and if the seeder is full then don't ask for addresses. This will reduce bandwith usage while still
 	// confirming that we can connect to the remote node
-	if full {
+	if s.isFull() {
 		return nil, nil
 	}
 	// send getaddr command
 	msgGetAddr := wire.NewMsgGetAddr()
 
-	err = wire.WriteMessage(conn, msgGetAddr, pver, netID)
+	err = wire.WriteMessage(conn, msgGetAddr, s.pver, s.id)
 	if err != nil {
 		return nil, &crawlError{"writing Addr message to remote client", err}
 	}
@@ -245,19 +246,19 @@ func crawlIP(pver uint32, netID wire.BitcoinNet, nd *node, full bool) ([]*wire.N
 		// Using the Bitcoin lib for the some networks means it does not understand some
 		// of the commands and will error. We can ignore these as we are only
 		// interested in the addr message and its content.
-		msgaddr, _, _ := wire.ReadMessage(conn, pver, netID)
+		msgaddr, _, _ := wire.ReadMessage(conn, s.pver, s.id)
 		if msgaddr != nil {
 			switch msg := msgaddr.(type) {
 			case *wire.MsgAddr:
 				// received the addr message so return the result
 				if config.debug {
-					log.Printf("%s - received valid addr message\n", ip)
+					log.Printf("%s - debug - %s - received valid addr message\n", s.name, ip)
 				}
 				dowhile = false
 				return msg.AddrList, nil
 			default:
 				if config.debug {
-					log.Printf("%s - ignoring message - %v\n", ip, msg.Command())
+					log.Printf("%s - debug - %s - ignoring message - %v\n", s.name, ip, msg.Command())
 				}
 			}
 		}

dns.go

@@ -101,8 +101,19 @@ func updateDNS(s *dnsseeder) {
 
 	config.dnsmtx.Unlock()
 
-	if config.debug {
+	if config.stats {
-		log.Printf("debug - DNS update complete - rr4std: %v rr4non: %v rr6std: %v rr6non: %v\n", len(rr4std), len(rr4non), len(rr6std), len(rr6non))
+		s.counts.mtx.RLock()
+		log.Printf("%s - DNS available: v4std: %v v4non: %v v6std: %v v6non: %v\n", s.name, len(rr4std), len(rr4non), len(rr6std), len(rr6non))
+		log.Printf("%s - DNS counts: v4std: %v v4non: %v v6std: %v v6non: %v total: %v\n",
+			s.name,
+			s.counts.DNSCounts[dnsV4Std],
+			s.counts.DNSCounts[dnsV4Non],
+			s.counts.DNSCounts[dnsV6Std],
+			s.counts.DNSCounts[dnsV6Non],
+			s.counts.DNSCounts[dnsV4Std]+s.counts.DNSCounts[dnsV4Non]+s.counts.DNSCounts[dnsV6Std]+s.counts.DNSCounts[dnsV6Non])
+
+		s.counts.mtx.RUnlock()
+
 	}
 }
 

main.go

@@ -51,7 +51,7 @@ func main() {
 	var j bool
 
 	// FIXME - update with git hash during build
-	config.version = "0.6.0"
+	config.version = "0.8.0"
 	config.uptime = time.Now()
 
 	flag.StringVar(&netfile, "netfile", "", "List of json config files to load")
@@ -101,12 +101,12 @@ func main() {
 		config.stats = true
 	}
 
-	if config.verbose == false {
-		log.Printf("status - Running in quiet mode with limited output produced\n")
-	} else {
 	for _, v := range config.seeders {
 		log.Printf("status - system is configured for network: %s\n", v.name)
 	}
+
+	if config.verbose == false {
+		log.Printf("status - Running in quiet mode with limited output produced\n")
 	}
 
 	// start the web interface if we want it running

seeder.go

@@ -117,7 +117,7 @@ func (s *dnsseeder) startCrawlers() {
 	tcount := len(s.theList)
 	if tcount == 0 {
 		if config.debug {
-			log.Printf("debug - startCrawlers fail: no node ailable\n")
+			log.Printf("%s - debug - startCrawlers fail: no node ailable\n", s.name)
 		}
 		return
 	}
@@ -171,14 +171,18 @@ func (s *dnsseeder) startCrawlers() {
 			c.started++
 		}
 
+		if config.stats {
 			log.Printf("%s: started crawler: %s total: %v started: %v\n", s.name, c.desc, c.totalCount, c.started)
+		}
 
 		// update the global stats in another goroutine to free the main goroutine
 		// for other work
 		go updateNodeCounts(s, c.status, c.totalCount, c.started)
 	}
 
+	if config.stats {
 		log.Printf("%s: crawlers started. total clients: %d\n", s.name, tcount)
+	}
 
 	// returns and read lock released
 }