@ -46,7 +46,7 @@ Specify data directory
@@ -46,7 +46,7 @@ Specify data directory
.HP
\fB\-dbcache=\fR<n>
.IP
Set database cache size in megabytes (4 to 16384, default: 300)
Set database cache size in megabytes (4 to 16384, default: 450)
.HP
\fB\-loadblock=\fR<file>
.IP
@ -65,6 +65,10 @@ Keep the transaction memory pool below <n> megabytes (default: 300)
@@ -65,6 +65,10 @@ Keep the transaction memory pool below <n> megabytes (default: 300)
Do not keep transactions in the mempool longer than <n> hours (default:
336)
.HP
\fB\-persistmempool\fR
.IP
Whether to save the mempool on shutdown and load on restart (default: 1)
.HP
\fB\-blockreconstructionextratxn=\fR<n>
.IP
Extra transactions to keep in memory for compact block reconstructions
@ -131,8 +135,8 @@ for IPv6
@@ -131,8 +135,8 @@ for IPv6
.HP
\fB\-connect=\fR<ip>
.IP
Connect only to the specified node(s); \fB\-noconnect\fR or \fB\-connect\fR=\fI\,0\/\fR alone to
disable automatic connections
Connect only to the specified node(s); \fB\-connect\fR=\fI\,0\/\fRdisablesautomatic
connections
.HP
\fB\-discover\fR
.IP
@ -146,7 +150,7 @@ Allow DNS lookups for \fB\-addnode\fR, \fB\-seednode\fR and \fB\-connect\fR (def
@@ -146,7 +150,7 @@ Allow DNS lookups for \fB\-addnode\fR, \fB\-seednode\fR and \fB\-connect\fR (def
\fB\-dnsseed\fR
.IP
Query for peer addresses via DNS lookup, if low on addresses (default: 1
unless \fB\-connect\fR/\-noconnect)
unless \fB\-connect\fR used)
.HP
\fB\-externalip=\fR<ip>
.IP
@ -158,8 +162,7 @@ Always query for peer addresses via DNS lookup (default: 0)
@@ -158,8 +162,7 @@ Always query for peer addresses via DNS lookup (default: 0)
.HP
\fB\-listen\fR
.IP
Accept connections from outside (default: 1 if no \fB\-proxy\fR or
\fB\-connect\fR/\-noconnect)
Accept connections from outside (default: 1 if no \fB\-proxy\fR or \fB\-connect\fR)
.HP
\fB\-listenonion\fR
.IP
@ -214,11 +217,6 @@ Connect through SOCKS5 proxy
@@ -214,11 +217,6 @@ Connect through SOCKS5 proxy
Randomize credentials for every proxy connection. This enables Tor
stream isolation (default: 1)
.HP
\fB\-rpcserialversion\fR
.IP
Sets the serialization of raw transaction or block hex returned in
non\-verbose mode, non\-segwit(0) or segwit(1) (default: 1)
.HP
\fB\-seednode=\fR<ip>
.IP
Connect to a node to retrieve peer addresses, and disconnect
@ -253,16 +251,6 @@ times. Whitelisted peers cannot be DoS banned and their
@@ -253,16 +251,6 @@ times. Whitelisted peers cannot be DoS banned and their
transactions are always relayed, even if they are already in the
mempool, useful e.g. for a gateway
.HP
\fB\-whitelistrelay\fR
.IP
Accept relayed transactions received from whitelisted peers even when
not relaying transactions (default: 1)
.HP
\fB\-whitelistforcerelay\fR
.IP
Force relay of transactions from whitelisted peers even if they violate
local relay policy (default: 1)
.HP
\fB\-maxuploadtarget=\fR<n>
.IP
Tries to keep outbound traffic under the given target (in MiB per 24h),
@ -276,13 +264,21 @@ Do not load the wallet and disable wallet RPC calls
@@ -276,13 +264,21 @@ Do not load the wallet and disable wallet RPC calls
.HP
\fB\-keypool=\fR<n>
.IP
Set key pool size to <n> (default: 100)
Set key pool size to <n> (default: 1000)
.HP
\fB\-fallbackfee=\fR<amt>
.IP
A fee rate (in BTC/kB) that will be used when fee estimation has
insufficient data (default: 0.0002)
.HP
\fB\-discardfee=\fR<amt>
.IP
The fee rate (in BTC/kB) that indicates your tolerance for discarding
change by adding it to the fee (default: 0.0001). Note: An output
is discarded if it is dust at this rate, but we will always
discard up to the dust relay fee and a discard fee above that is
limited by the fee estimate for the longest target
.HP
\fB\-mintxfee=\fR<amt>
.IP
Fees (in BTC/kB) smaller than this are considered zero fee for
Exclude debugging information for a category. Can be used in conjunction
with \fB\-debug\fR=\fI\,1\/\fR to output debug logs for all categories except one
or more specified categories.
.HP
\fB\-help\-debug\fR
.IP
@ -387,11 +384,6 @@ Include IP addresses in debug output (default: 0)
@@ -387,11 +384,6 @@ Include IP addresses in debug output (default: 0)
.IP
Prepend debug output with timestamp (default: 1)
.HP
\fB\-minrelaytxfee=\fR<amt>
.IP
Fees (in BTC/kB) smaller than this are considered zero fee for relaying,
mining and transaction creation (default: 0.00001)
.HP
\fB\-maxtxfee=\fR<amt>
.IP
Maximum total fees (in BTC) to use in a single wallet transaction or raw
@ -431,21 +423,32 @@ Maximum size of data in data carrier transactions we relay and mine
@@ -431,21 +423,32 @@ Maximum size of data in data carrier transactions we relay and mine
\fB\-mempoolreplacement\fR
.IP
Enable transaction replacement in the memory pool (default: 1)
.HP
\fB\-minrelaytxfee=\fR<amt>
.IP
Fees (in BTC/kB) smaller than this are considered zero fee for relaying,
mining and transaction creation (default: 0.00001)
.HP
\fB\-whitelistrelay\fR
.IP
Accept relayed transactions received from whitelisted peers even when
not relaying transactions (default: 1)
.HP
\fB\-whitelistforcerelay\fR
.IP
Force relay of transactions from whitelisted peers even if they violate
local relay policy (default: 1)
.PP
Block creation options:
.HP
\fB\-blockmaxweight=\fR<n>
.IP
Set maximum BIP141 block weight (default: 3000000)
Set maximum BIP141 block weight (default: 3996000)
.HP
\fB\-blockmaxsize=\fR<n>
.IP
Set maximum block size in bytes (default: 750000)
.HP
\fB\-blockprioritysize=\fR<n>
.IP
Set maximum size of high\-priority/low\-fee transactions in bytes
(default: 0)
Set maximum BIP141 block weight to this * 4. Deprecated, use
blockmaxweight
.HP
\fB\-blockmintxfee=\fR<amt>
.IP
@ -462,11 +465,14 @@ Accept command line and JSON\-RPC commands
@@ -462,11 +465,14 @@ Accept command line and JSON\-RPC commands
.IP
Accept public REST requests (default: 0)
.HP
\fB\-rpcbind=\fR<addr>
\fB\-rpcbind=\fR<addr>[:port]
.IP
Bind to given address to listen for JSON\-RPC connections. Use
[host]:port notation for IPv6. This option can be specified
multiple times (default: bind to all interfaces)
Bind to given address to listen for JSON\-RPC connections. This option is
ignored unless \fB\-rpcallowip\fR is also passed. Port is optional and
overrides \fB\-rpcport\fR. Use [host]:port notation for IPv6. This
option can be specified multiple times (default: 127.0.0.1 and
::1 i.e., localhost, or if \fB\-rpcallowip\fR has been specified,
0.0.0.0 and :: i.e., all addresses)
.HP
\fB\-rpccookiefile=\fR<loc>
.IP
@ -501,6 +507,11 @@ single IP (e.g. 1.2.3.4), a network/netmask (e.g.
@@ -501,6 +507,11 @@ single IP (e.g. 1.2.3.4), a network/netmask (e.g.
1.2.3.4/255.255.255.0) or a network/CIDR (e.g. 1.2.3.4/24). This
option can be specified multiple times
.HP
\fB\-rpcserialversion\fR
.IP
Sets the serialization of raw transaction or block hex returned in
non\-verbose mode, non\-segwit(0) or segwit(1) (default: 1)
.HP
\fB\-rpcthreads=\fR<n>
.IP
Set the number of threads to service RPC calls (default: 4)
@ -51,7 +51,7 @@ Specify data directory
@@ -51,7 +51,7 @@ Specify data directory
.HP
\fB\-dbcache=\fR<n>
.IP
Set database cache size in megabytes (4 to 16384, default: 300)
Set database cache size in megabytes (4 to 16384, default: 450)
.HP
\fB\-loadblock=\fR<file>
.IP
@ -70,6 +70,10 @@ Keep the transaction memory pool below <n> megabytes (default: 300)
@@ -70,6 +70,10 @@ Keep the transaction memory pool below <n> megabytes (default: 300)
Do not keep transactions in the mempool longer than <n> hours (default:
336)
.HP
\fB\-persistmempool\fR
.IP
Whether to save the mempool on shutdown and load on restart (default: 1)
.HP
\fB\-blockreconstructionextratxn=\fR<n>
.IP
Extra transactions to keep in memory for compact block reconstructions
@ -136,8 +140,8 @@ for IPv6
@@ -136,8 +140,8 @@ for IPv6
.HP
\fB\-connect=\fR<ip>
.IP
Connect only to the specified node(s); \fB\-noconnect\fR or \fB\-connect\fR=\fI\,0\/\fR alone to
disable automatic connections
Connect only to the specified node(s); \fB\-connect\fR=\fI\,0\/\fRdisablesautomatic
connections
.HP
\fB\-discover\fR
.IP
@ -151,7 +155,7 @@ Allow DNS lookups for \fB\-addnode\fR, \fB\-seednode\fR and \fB\-connect\fR (def
@@ -151,7 +155,7 @@ Allow DNS lookups for \fB\-addnode\fR, \fB\-seednode\fR and \fB\-connect\fR (def
\fB\-dnsseed\fR
.IP
Query for peer addresses via DNS lookup, if low on addresses (default: 1
unless \fB\-connect\fR/\-noconnect)
unless \fB\-connect\fR used)
.HP
\fB\-externalip=\fR<ip>
.IP
@ -163,8 +167,7 @@ Always query for peer addresses via DNS lookup (default: 0)
@@ -163,8 +167,7 @@ Always query for peer addresses via DNS lookup (default: 0)
.HP
\fB\-listen\fR
.IP
Accept connections from outside (default: 1 if no \fB\-proxy\fR or
\fB\-connect\fR/\-noconnect)
Accept connections from outside (default: 1 if no \fB\-proxy\fR or \fB\-connect\fR)
.HP
\fB\-listenonion\fR
.IP
@ -219,11 +222,6 @@ Connect through SOCKS5 proxy
@@ -219,11 +222,6 @@ Connect through SOCKS5 proxy
Randomize credentials for every proxy connection. This enables Tor
stream isolation (default: 1)
.HP
\fB\-rpcserialversion\fR
.IP
Sets the serialization of raw transaction or block hex returned in
non\-verbose mode, non\-segwit(0) or segwit(1) (default: 1)
.HP
\fB\-seednode=\fR<ip>
.IP
Connect to a node to retrieve peer addresses, and disconnect
@ -258,16 +256,6 @@ times. Whitelisted peers cannot be DoS banned and their
@@ -258,16 +256,6 @@ times. Whitelisted peers cannot be DoS banned and their
transactions are always relayed, even if they are already in the
mempool, useful e.g. for a gateway
.HP
\fB\-whitelistrelay\fR
.IP
Accept relayed transactions received from whitelisted peers even when
not relaying transactions (default: 1)
.HP
\fB\-whitelistforcerelay\fR
.IP
Force relay of transactions from whitelisted peers even if they violate
local relay policy (default: 1)
.HP
\fB\-maxuploadtarget=\fR<n>
.IP
Tries to keep outbound traffic under the given target (in MiB per 24h),
@ -281,13 +269,21 @@ Do not load the wallet and disable wallet RPC calls
@@ -281,13 +269,21 @@ Do not load the wallet and disable wallet RPC calls
.HP
\fB\-keypool=\fR<n>
.IP
Set key pool size to <n> (default: 100)
Set key pool size to <n> (default: 1000)
.HP
\fB\-fallbackfee=\fR<amt>
.IP
A fee rate (in BTC/kB) that will be used when fee estimation has
insufficient data (default: 0.0002)
.HP
\fB\-discardfee=\fR<amt>
.IP
The fee rate (in BTC/kB) that indicates your tolerance for discarding
change by adding it to the fee (default: 0.0001). Note: An output
is discarded if it is dust at this rate, but we will always
discard up to the dust relay fee and a discard fee above that is
limited by the fee estimate for the longest target
.HP
\fB\-mintxfee=\fR<amt>
.IP
Fees (in BTC/kB) smaller than this are considered zero fee for
Exclude debugging information for a category. Can be used in conjunction
with \fB\-debug\fR=\fI\,1\/\fR to output debug logs for all categories except one
or more specified categories.
.HP
\fB\-help\-debug\fR
.IP
@ -392,11 +389,6 @@ Include IP addresses in debug output (default: 0)
@@ -392,11 +389,6 @@ Include IP addresses in debug output (default: 0)
.IP
Prepend debug output with timestamp (default: 1)
.HP
\fB\-minrelaytxfee=\fR<amt>
.IP
Fees (in BTC/kB) smaller than this are considered zero fee for relaying,
mining and transaction creation (default: 0.00001)
.HP
\fB\-maxtxfee=\fR<amt>
.IP
Maximum total fees (in BTC) to use in a single wallet transaction or raw
@ -436,21 +428,32 @@ Maximum size of data in data carrier transactions we relay and mine
@@ -436,21 +428,32 @@ Maximum size of data in data carrier transactions we relay and mine
\fB\-mempoolreplacement\fR
.IP
Enable transaction replacement in the memory pool (default: 1)
.HP
\fB\-minrelaytxfee=\fR<amt>
.IP
Fees (in BTC/kB) smaller than this are considered zero fee for relaying,
mining and transaction creation (default: 0.00001)
.HP
\fB\-whitelistrelay\fR
.IP
Accept relayed transactions received from whitelisted peers even when
not relaying transactions (default: 1)
.HP
\fB\-whitelistforcerelay\fR
.IP
Force relay of transactions from whitelisted peers even if they violate
local relay policy (default: 1)
.PP
Block creation options:
.HP
\fB\-blockmaxweight=\fR<n>
.IP
Set maximum BIP141 block weight (default: 3000000)
Set maximum BIP141 block weight (default: 3996000)
.HP
\fB\-blockmaxsize=\fR<n>
.IP
Set maximum block size in bytes (default: 750000)
.HP
\fB\-blockprioritysize=\fR<n>
.IP
Set maximum size of high\-priority/low\-fee transactions in bytes
(default: 0)
Set maximum BIP141 block weight to this * 4. Deprecated, use
blockmaxweight
.HP
\fB\-blockmintxfee=\fR<amt>
.IP
@ -467,11 +470,14 @@ Accept command line and JSON\-RPC commands
@@ -467,11 +470,14 @@ Accept command line and JSON\-RPC commands
.IP
Accept public REST requests (default: 0)
.HP
\fB\-rpcbind=\fR<addr>
\fB\-rpcbind=\fR<addr>[:port]
.IP
Bind to given address to listen for JSON\-RPC connections. Use
[host]:port notation for IPv6. This option can be specified
multiple times (default: bind to all interfaces)
Bind to given address to listen for JSON\-RPC connections. This option is
ignored unless \fB\-rpcallowip\fR is also passed. Port is optional and
overrides \fB\-rpcport\fR. Use [host]:port notation for IPv6. This
option can be specified multiple times (default: 127.0.0.1 and
::1 i.e., localhost, or if \fB\-rpcallowip\fR has been specified,
0.0.0.0 and :: i.e., all addresses)
.HP
\fB\-rpccookiefile=\fR<loc>
.IP
@ -506,6 +512,11 @@ single IP (e.g. 1.2.3.4), a network/netmask (e.g.
@@ -506,6 +512,11 @@ single IP (e.g. 1.2.3.4), a network/netmask (e.g.
1.2.3.4/255.255.255.0) or a network/CIDR (e.g. 1.2.3.4/24). This
option can be specified multiple times
.HP
\fB\-rpcserialversion\fR
.IP
Sets the serialization of raw transaction or block hex returned in
non\-verbose mode, non\-segwit(0) or segwit(1) (default: 1)
.HP
\fB\-rpcthreads=\fR<n>
.IP
Set the number of threads to service RPC calls (default: 4)
MarcoFalke
7 years ago