Browse Source

update bitcoinstrings.cpp and bitcoin_en.ts

0.8
Philip Kaufmann 12 years ago
parent
commit
baa510b210
  1. 38
      src/qt/bitcoinstrings.cpp
  2. 424
      src/qt/locale/bitcoin_en.ts

38
src/qt/bitcoinstrings.cpp

@ -13,26 +13,33 @@ QT_TRANSLATE_NOOP("bitcoin-core", "" @@ -13,26 +13,33 @@ QT_TRANSLATE_NOOP("bitcoin-core", ""
"rpcuser=bitcoinrpc\n"
"rpcpassword=%s\n"
"(you do not need to remember this password)\n"
"The username and password MUST NOT be the same.\n"
"If the file does not exist, create it with owner-readable-only file "
"permissions.\n"),
QT_TRANSLATE_NOOP("bitcoin-core", ""
"Acceptable ciphers (default: TLSv1+HIGH:!SSLv2:!aNULL:!eNULL:!AH:!3DES:"
"@STRENGTH)"),
QT_TRANSLATE_NOOP("bitcoin-core", ""
"An error occurred while setting up the RPC port %u for listening on IPv4: %s"),
QT_TRANSLATE_NOOP("bitcoin-core", ""
"An error occurred while setting up the RPC port %u for listening on IPv6, "
"falling back to IPv4: %s"),
QT_TRANSLATE_NOOP("bitcoin-core", ""
"An error occurred while setting up the RPC port %u for listening on IPv4: %s"),
"Bind to given address and always listen on it. Use [host]:port notation for "
"IPv6"),
QT_TRANSLATE_NOOP("bitcoin-core", ""
"Cannot obtain a lock on data directory %s. Bitcoin is probably already "
"Cannot obtain a lock on data directory %s. Bitcoin is probably already "
"running."),
QT_TRANSLATE_NOOP("bitcoin-core", ""
"Error: The transaction was rejected. This might happen if some of the coins "
"Error initializing database environment %s! To recover, BACKUP THAT "
"DIRECTORY, then remove everything from it except for wallet.dat."),
QT_TRANSLATE_NOOP("bitcoin-core", ""
"Error: The transaction was rejected! This might happen if some of the coins "
"in your wallet were already spent, such as if you used a copy of wallet.dat "
"and coins were spent in the copy but not marked as spent here."),
QT_TRANSLATE_NOOP("bitcoin-core", ""
"Error: This transaction requires a transaction fee of at least %s because of "
"its amount, complexity, or use of recently received funds "),
"its amount, complexity, or use of recently received funds!"),
QT_TRANSLATE_NOOP("bitcoin-core", ""
"Execute command when the best block changes (%s in cmd is replaced by block "
"hash)"),
@ -45,6 +52,9 @@ QT_TRANSLATE_NOOP("bitcoin-core", "" @@ -45,6 +52,9 @@ QT_TRANSLATE_NOOP("bitcoin-core", ""
"Set maximum size of high-priority/low-fee transactions in bytes (default: "
"27000)"),
QT_TRANSLATE_NOOP("bitcoin-core", ""
"This is a pre-release test build - use at your own risk - do not use for "
"mining or merchant applications"),
QT_TRANSLATE_NOOP("bitcoin-core", ""
"Unable to bind to %s on this computer. Bitcoin is probably already running."),
QT_TRANSLATE_NOOP("bitcoin-core", ""
"Warning: -paytxfee is set very high! This is the transaction fee you will "
@ -56,6 +66,13 @@ QT_TRANSLATE_NOOP("bitcoin-core", "" @@ -56,6 +66,13 @@ QT_TRANSLATE_NOOP("bitcoin-core", ""
"Warning: Please check that your computer's date and time are correct! If "
"your clock is wrong Bitcoin will not work properly."),
QT_TRANSLATE_NOOP("bitcoin-core", ""
"Warning: error reading wallet.dat! All keys read correctly, but transaction "
"data or address book entries might be missing or incorrect."),
QT_TRANSLATE_NOOP("bitcoin-core", ""
"Warning: wallet.dat corrupt, data salvaged! Original wallet.dat saved as "
"wallet.{timestamp}.bak in %s; if your balance or transactions are incorrect "
"you should restore from a backup."),
QT_TRANSLATE_NOOP("bitcoin-core", ""
"You must set rpcpassword=<password> in the configuration file:\n"
"%s\n"
"If the file does not exist, create it with owner-readable-only file "
@ -65,7 +82,7 @@ QT_TRANSLATE_NOOP("bitcoin-core", "Accept connections from outside (default: 1 i @@ -65,7 +82,7 @@ QT_TRANSLATE_NOOP("bitcoin-core", "Accept connections from outside (default: 1 i
QT_TRANSLATE_NOOP("bitcoin-core", "Add a node to connect to and attempt to keep the connection open"),
QT_TRANSLATE_NOOP("bitcoin-core", "Allow DNS lookups for -addnode, -seednode and -connect"),
QT_TRANSLATE_NOOP("bitcoin-core", "Allow JSON-RPC connections from specified IP address"),
QT_TRANSLATE_NOOP("bitcoin-core", "Bind to given address. Use [host]:port notation for IPv6"),
QT_TRANSLATE_NOOP("bitcoin-core", "Attempt to recover private keys from a corrupt wallet.dat"),
QT_TRANSLATE_NOOP("bitcoin-core", "Bitcoin version"),
QT_TRANSLATE_NOOP("bitcoin-core", "Bitcoin"),
QT_TRANSLATE_NOOP("bitcoin-core", "Block creation options:"),
@ -85,8 +102,8 @@ QT_TRANSLATE_NOOP("bitcoin-core", "Error loading wallet.dat"), @@ -85,8 +102,8 @@ QT_TRANSLATE_NOOP("bitcoin-core", "Error loading wallet.dat"),
QT_TRANSLATE_NOOP("bitcoin-core", "Error loading wallet.dat: Wallet corrupted"),
QT_TRANSLATE_NOOP("bitcoin-core", "Error loading wallet.dat: Wallet requires newer version of Bitcoin"),
QT_TRANSLATE_NOOP("bitcoin-core", "Error"),
QT_TRANSLATE_NOOP("bitcoin-core", "Error: Transaction creation failed "),
QT_TRANSLATE_NOOP("bitcoin-core", "Error: Wallet locked, unable to create transaction "),
QT_TRANSLATE_NOOP("bitcoin-core", "Error: Transaction creation failed!"),
QT_TRANSLATE_NOOP("bitcoin-core", "Error: Wallet locked, unable to create transaction!"),
QT_TRANSLATE_NOOP("bitcoin-core", "Error: could not start node"),
QT_TRANSLATE_NOOP("bitcoin-core", "Failed to listen on any port. Use -listen=0 if you want this."),
QT_TRANSLATE_NOOP("bitcoin-core", "Fee per KB to add to transactions you send"),
@ -96,8 +113,7 @@ QT_TRANSLATE_NOOP("bitcoin-core", "Generate coins"), @@ -96,8 +113,7 @@ QT_TRANSLATE_NOOP("bitcoin-core", "Generate coins"),
QT_TRANSLATE_NOOP("bitcoin-core", "Get help for a command"),
QT_TRANSLATE_NOOP("bitcoin-core", "How many blocks to check at startup (default: 2500, 0 = all)"),
QT_TRANSLATE_NOOP("bitcoin-core", "How thorough the block verification is (0-6, default: 1)"),
QT_TRANSLATE_NOOP("bitcoin-core", "Importing blockchain data file."),
QT_TRANSLATE_NOOP("bitcoin-core", "Importing bootstrap blockchain data file."),
QT_TRANSLATE_NOOP("bitcoin-core", "Importing blocks from block database..."),
QT_TRANSLATE_NOOP("bitcoin-core", "Imports blocks from external blk000?.dat file"),
QT_TRANSLATE_NOOP("bitcoin-core", "Insufficient funds"),
QT_TRANSLATE_NOOP("bitcoin-core", "Invalid -proxy address: '%s'"),
@ -118,6 +134,7 @@ QT_TRANSLATE_NOOP("bitcoin-core", "Output extra debugging information. Implies a @@ -118,6 +134,7 @@ QT_TRANSLATE_NOOP("bitcoin-core", "Output extra debugging information. Implies a
QT_TRANSLATE_NOOP("bitcoin-core", "Output extra network debugging information"),
QT_TRANSLATE_NOOP("bitcoin-core", "Password for JSON-RPC connections"),
QT_TRANSLATE_NOOP("bitcoin-core", "Prepend debug output with timestamp"),
QT_TRANSLATE_NOOP("bitcoin-core", "Rebuild blockchain index from current blk000??.dat files"),
QT_TRANSLATE_NOOP("bitcoin-core", "Rescan the block chain for missing wallet transactions"),
QT_TRANSLATE_NOOP("bitcoin-core", "Rescanning..."),
QT_TRANSLATE_NOOP("bitcoin-core", "Run in the background as a daemon and accept commands"),
@ -131,7 +148,6 @@ QT_TRANSLATE_NOOP("bitcoin-core", "Sending..."), @@ -131,7 +148,6 @@ QT_TRANSLATE_NOOP("bitcoin-core", "Sending..."),
QT_TRANSLATE_NOOP("bitcoin-core", "Server certificate file (default: server.cert)"),
QT_TRANSLATE_NOOP("bitcoin-core", "Server private key (default: server.pem)"),
QT_TRANSLATE_NOOP("bitcoin-core", "Set database cache size in megabytes (default: 25)"),
QT_TRANSLATE_NOOP("bitcoin-core", "Set database disk log size in megabytes (default: 100)"),
QT_TRANSLATE_NOOP("bitcoin-core", "Set key pool size to <n> (default: 100)"),
QT_TRANSLATE_NOOP("bitcoin-core", "Set maximum block size in bytes (default: 250000)"),
QT_TRANSLATE_NOOP("bitcoin-core", "Set minimum block size in bytes (default: 0)"),
@ -155,7 +171,9 @@ QT_TRANSLATE_NOOP("bitcoin-core", "Use UPnP to map the listening port (default: @@ -155,7 +171,9 @@ QT_TRANSLATE_NOOP("bitcoin-core", "Use UPnP to map the listening port (default:
QT_TRANSLATE_NOOP("bitcoin-core", "Use proxy to reach tor hidden services (default: same as -proxy)"),
QT_TRANSLATE_NOOP("bitcoin-core", "Use the test network"),
QT_TRANSLATE_NOOP("bitcoin-core", "Username for JSON-RPC connections"),
QT_TRANSLATE_NOOP("bitcoin-core", "Verifying database integrity..."),
QT_TRANSLATE_NOOP("bitcoin-core", "Wallet needed to be rewritten: restart Bitcoin to complete"),
QT_TRANSLATE_NOOP("bitcoin-core", "Warning: Disk space is low!"),
QT_TRANSLATE_NOOP("bitcoin-core", "Warning: This version is obsolete, upgrade required!"),
QT_TRANSLATE_NOOP("bitcoin-core", "wallet.dat corrupt, salvage failed"),
};

424
src/qt/locale/bitcoin_en.ts

@ -300,17 +300,17 @@ This product includes software developed by the OpenSSL Project for use in the O @@ -300,17 +300,17 @@ This product includes software developed by the OpenSSL Project for use in the O
<context>
<name>BitcoinGUI</name>
<message>
<location filename="../bitcoingui.cpp" line="+257"/>
<location filename="../bitcoingui.cpp" line="+266"/>
<source>Sign &amp;message...</source>
<translation>Sign &amp;message...</translation>
</message>
<message>
<location line="+237"/>
<location line="+241"/>
<source>Synchronizing with network...</source>
<translation>Synchronizing with network...</translation>
</message>
<message>
<location line="-299"/>
<location line="-309"/>
<source>&amp;Overview</source>
<translation>&amp;Overview</translation>
</message>
@ -320,7 +320,7 @@ This product includes software developed by the OpenSSL Project for use in the O @@ -320,7 +320,7 @@ This product includes software developed by the OpenSSL Project for use in the O
<translation>Show general overview of wallet</translation>
</message>
<message>
<location line="+17"/>
<location line="+20"/>
<source>&amp;Transactions</source>
<translation>&amp;Transactions</translation>
</message>
@ -330,7 +330,7 @@ This product includes software developed by the OpenSSL Project for use in the O @@ -330,7 +330,7 @@ This product includes software developed by the OpenSSL Project for use in the O
<translation>Browse transaction history</translation>
</message>
<message>
<location line="+5"/>
<location line="+6"/>
<source>&amp;Address Book</source>
<translation>&amp;Address Book</translation>
</message>
@ -340,7 +340,7 @@ This product includes software developed by the OpenSSL Project for use in the O @@ -340,7 +340,7 @@ This product includes software developed by the OpenSSL Project for use in the O
<translation>Edit the list of stored addresses and labels</translation>
</message>
<message>
<location line="-13"/>
<location line="-15"/>
<source>&amp;Receive coins</source>
<translation>&amp;Receive coins</translation>
</message>
@ -350,12 +350,12 @@ This product includes software developed by the OpenSSL Project for use in the O @@ -350,12 +350,12 @@ This product includes software developed by the OpenSSL Project for use in the O
<translation>Show the list of addresses for receiving payments</translation>
</message>
<message>
<location line="-7"/>
<location line="-8"/>
<source>&amp;Send coins</source>
<translation>&amp;Send coins</translation>
</message>
<message>
<location line="+35"/>
<location line="+39"/>
<source>E&amp;xit</source>
<translation>E&amp;xit</translation>
</message>
@ -385,7 +385,7 @@ This product includes software developed by the OpenSSL Project for use in the O @@ -385,7 +385,7 @@ This product includes software developed by the OpenSSL Project for use in the O
<translation>&amp;Options...</translation>
</message>
<message>
<location line="+4"/>
<location line="+5"/>
<source>&amp;Encrypt Wallet...</source>
<translation>&amp;Encrypt Wallet...</translation>
</message>
@ -399,8 +399,18 @@ This product includes software developed by the OpenSSL Project for use in the O @@ -399,8 +399,18 @@ This product includes software developed by the OpenSSL Project for use in the O
<source>&amp;Change Passphrase...</source>
<translation>&amp;Change Passphrase...</translation>
</message>
<message>
<location line="+246"/>
<source>Importing blocks from disk...</source>
<translation>Importing blocks from disk...</translation>
</message>
<message>
<location line="+3"/>
<source>Reindexing blocks on disk...</source>
<translation>Reindexing blocks on disk...</translation>
</message>
<message numerus="yes">
<location line="+241"/>
<location line="+10"/>
<source>~%n block(s) remaining</source>
<translation>
<numerusform>~%n block remaining</numerusform>
@ -408,37 +418,27 @@ This product includes software developed by the OpenSSL Project for use in the O @@ -408,37 +418,27 @@ This product includes software developed by the OpenSSL Project for use in the O
</translation>
</message>
<message>
<location line="+6"/>
<source>Downloaded %1 of %2 blocks of transaction history (%3% done).</source>
<translation>Downloaded %1 of %2 blocks of transaction history (%3% done).</translation>
</message>
<message>
<location line="-242"/>
<location line="-252"/>
<source>&amp;Export...</source>
<translation>&amp;Export...</translation>
</message>
<message>
<location line="-58"/>
<location line="-65"/>
<source>Send coins to a Bitcoin address</source>
<translation>Send coins to a Bitcoin address</translation>
</message>
<message>
<location line="+45"/>
<location line="+49"/>
<source>Modify configuration options for Bitcoin</source>
<translation>Modify configuration options for Bitcoin</translation>
</message>
<message>
<location line="+14"/>
<location line="+17"/>
<source>Export the data in the current tab to a file</source>
<translation>Export the data in the current tab to a file</translation>
</message>
<message>
<location line="-10"/>
<source>Encrypt or decrypt wallet</source>
<translation>Encrypt or decrypt wallet</translation>
</message>
<message>
<location line="+3"/>
<location line="-9"/>
<source>Backup wallet to another location</source>
<translation>Backup wallet to another location</translation>
</message>
@ -448,7 +448,7 @@ This product includes software developed by the OpenSSL Project for use in the O @@ -448,7 +448,7 @@ This product includes software developed by the OpenSSL Project for use in the O
<translation>Change the passphrase used for wallet encryption</translation>
</message>
<message>
<location line="+6"/>
<location line="+9"/>
<source>&amp;Debug window</source>
<translation>&amp;Debug window</translation>
</message>
@ -458,12 +458,12 @@ This product includes software developed by the OpenSSL Project for use in the O @@ -458,12 +458,12 @@ This product includes software developed by the OpenSSL Project for use in the O
<translation>Open debugging and diagnostic console</translation>
</message>
<message>
<location line="-5"/>
<location line="-7"/>
<source>&amp;Verify message...</source>
<translation>&amp;Verify message...</translation>
</message>
<message>
<location line="-186"/>
<location line="-196"/>
<source>Bitcoin</source>
<translation>Bitcoin</translation>
</message>
@ -473,7 +473,7 @@ This product includes software developed by the OpenSSL Project for use in the O @@ -473,7 +473,7 @@ This product includes software developed by the OpenSSL Project for use in the O
<translation>Wallet</translation>
</message>
<message>
<location line="+168"/>
<location line="+176"/>
<source>&amp;About Bitcoin</source>
<translation>&amp;About Bitcoin</translation>
</message>
@ -483,7 +483,27 @@ This product includes software developed by the OpenSSL Project for use in the O @@ -483,7 +483,27 @@ This product includes software developed by the OpenSSL Project for use in the O
<translation>&amp;Show / Hide</translation>
</message>
<message>
<location line="+39"/>
<location line="+1"/>
<source>Show or hide the main Window</source>
<translation>Show or hide the main Window</translation>
</message>
<message>
<location line="+2"/>
<source>Encrypt the private keys that belong to your wallet</source>
<translation>Encrypt the private keys that belong to your wallet</translation>
</message>
<message>
<location line="+7"/>
<source>Sign messages with your Bitcoin addresses to prove you own them</source>
<translation>Sign messages with your Bitcoin addresses to prove you own them</translation>
</message>
<message>
<location line="+2"/>
<source>Verify messages to ensure they were signed with specified Bitcoin addresses</source>
<translation>Verify messages to ensure they were signed with specified Bitcoin addresses</translation>
</message>
<message>
<location line="+31"/>
<source>&amp;File</source>
<translation>&amp;File</translation>
</message>
@ -509,12 +529,11 @@ This product includes software developed by the OpenSSL Project for use in the O @@ -509,12 +529,11 @@ This product includes software developed by the OpenSSL Project for use in the O
</message>
<message>
<location line="+13"/>
<location line="+9"/>
<location line="+10"/>
<source>[testnet]</source>
<translation>[testnet]</translation>
</message>
<message>
<location line="+0"/>
<location line="+60"/>
<source>Bitcoin client</source>
<translation>Bitcoin client</translation>
@ -528,12 +547,22 @@ This product includes software developed by the OpenSSL Project for use in the O @@ -528,12 +547,22 @@ This product includes software developed by the OpenSSL Project for use in the O
</translation>
</message>
<message>
<location line="+40"/>
<source>Downloaded %1 blocks of transaction history.</source>
<translation>Downloaded %1 blocks of transaction history.</translation>
<location line="+45"/>
<source>Processed %1 of %2 blocks of transaction history (%3% done).</source>
<translation>Processed %1 of %2 blocks of transaction history (%3% done).</translation>
</message>
<message>
<location line="+7"/>
<source>Processed %1 blocks of transaction history.</source>
<translation>Processed %1 blocks of transaction history.</translation>
</message>
<message>
<location line="+107"/>
<source>This transaction is over the size limit. You can still send it for a fee of %1, which goes to the nodes that process your transaction and helps to support the network. Do you want to pay the fee?</source>
<translation>This transaction is over the size limit. You can still send it for a fee of %1, which goes to the nodes that process your transaction and helps to support the network. Do you want to pay the fee?</translation>
</message>
<message numerus="yes">
<location line="+22"/>
<location line="-93"/>
<source>%n second(s) ago</source>
<translation>
<numerusform>%n second ago</numerusform>
@ -580,12 +609,7 @@ This product includes software developed by the OpenSSL Project for use in the O @@ -580,12 +609,7 @@ This product includes software developed by the OpenSSL Project for use in the O
<translation>Last received block was generated %1.</translation>
</message>
<message>
<location line="+59"/>
<source>This transaction is over the size limit. You can still send it for a fee of %1, which goes to the nodes that process your transaction and helps to support the network. Do you want to pay the fee?</source>
<translation>This transaction is over the size limit. You can still send it for a fee of %1, which goes to the nodes that process your transaction and helps to support the network. Do you want to pay the fee?</translation>
</message>
<message>
<location line="+5"/>
<location line="+62"/>
<source>Confirm transaction fee</source>
<translation>Confirm transaction fee</translation>
</message>
@ -614,13 +638,13 @@ Address: %4 @@ -614,13 +638,13 @@ Address: %4
</message>
<message>
<location line="+100"/>
<location line="+15"/>
<location line="+27"/>
<source>URI handling</source>
<translation>URI handling</translation>
</message>
<message>
<location line="-15"/>
<location line="+15"/>
<location line="-27"/>
<location line="+27"/>
<source>URI can not be parsed! This can be caused by an invalid Bitcoin address or malformed URI parameters.</source>
<translation>URI can not be parsed! This can be caused by an invalid Bitcoin address or malformed URI parameters.</translation>
</message>
@ -812,16 +836,6 @@ Address: %4 @@ -812,16 +836,6 @@ Address: %4
<source>&amp;Start Bitcoin on system login</source>
<translation>&amp;Start Bitcoin on system login</translation>
</message>
<message>
<location line="+7"/>
<source>Detach block and address databases at shutdown. This means they can be moved to another data directory, but it slows down shutdown. The wallet is always detached.</source>
<translation>Detach block and address databases at shutdown. This means they can be moved to another data directory, but it slows down shutdown. The wallet is always detached.</translation>
</message>
<message>
<location line="+3"/>
<source>&amp;Detach databases at shutdown</source>
<translation>&amp;Detach databases at shutdown</translation>
</message>
<message>
<location line="+21"/>
<source>&amp;Network</source>
@ -958,7 +972,7 @@ Address: %4 @@ -958,7 +972,7 @@ Address: %4
<translation>default</translation>
</message>
<message>
<location line="+147"/>
<location line="+146"/>
<location line="+9"/>
<source>Warning</source>
<translation>Warning</translation>
@ -983,7 +997,7 @@ Address: %4 @@ -983,7 +997,7 @@ Address: %4
<translation>Form</translation>
</message>
<message>
<location line="+33"/>
<location line="+52"/>
<location line="+183"/>
<source>The displayed information may be out of date. Your wallet automatically synchronizes with the Bitcoin network after a connection is established, but this process has not completed yet.</source>
<translation>The displayed information may be out of date. Your wallet automatically synchronizes with the Bitcoin network after a connection is established, but this process has not completed yet.</translation>
@ -1039,7 +1053,7 @@ Address: %4 @@ -1039,7 +1053,7 @@ Address: %4
<translation>Total number of transactions in wallet</translation>
</message>
<message>
<location filename="../overviewpage.cpp" line="+112"/>
<location filename="../overviewpage.cpp" line="+115"/>
<location line="+1"/>
<source>out of sync</source>
<translation>out of sync</translation>
@ -1120,7 +1134,7 @@ Address: %4 @@ -1120,7 +1134,7 @@ Address: %4
<location line="+53"/>
<location line="+23"/>
<location line="+23"/>
<location filename="../rpcconsole.cpp" line="+348"/>
<location filename="../rpcconsole.cpp" line="+349"/>
<source>N/A</source>
<translation>N/A</translation>
</message>
@ -1351,8 +1365,8 @@ Address: %4 @@ -1351,8 +1365,8 @@ Address: %4
</message>
<message>
<location line="+5"/>
<source>Error: Transaction creation failed.</source>
<translation>Error: Transaction creation failed.</translation>
<source>Error: Transaction creation failed!</source>
<translation>Error: Transaction creation failed!</translation>
</message>
<message>
<location line="+5"/>
@ -1378,23 +1392,23 @@ Address: %4 @@ -1378,23 +1392,23 @@ Address: %4
<translation>Pay &amp;To:</translation>
</message>
<message>
<location line="+24"/>
<location line="+34"/>
<source>The address to send the payment to (e.g. 1NS17iag9jJgTHD1VXjvLCEnZuQ3rJDE9L)</source>
<translation>The address to send the payment to (e.g. 1NS17iag9jJgTHD1VXjvLCEnZuQ3rJDE9L)</translation>
</message>
<message>
<location line="+60"/>
<location filename="../sendcoinsentry.cpp" line="+25"/>
<source>Enter a label for this address to add it to your address book</source>
<translation>Enter a label for this address to add it to your address book</translation>
</message>
<message>
<location line="+9"/>
<location line="-78"/>
<source>&amp;Label:</source>
<translation>&amp;Label:</translation>
</message>
<message>
<location line="+18"/>
<source>The address to send the payment to (e.g. 1NS17iag9jJgTHD1VXjvLCEnZuQ3rJDE9L)</source>
<translation>The address to send the payment to (e.g. 1NS17iag9jJgTHD1VXjvLCEnZuQ3rJDE9L)</translation>
</message>
<message>
<location line="+10"/>
<location line="+28"/>
<source>Choose address from address book</source>
<translation>Choose address from address book</translation>
</message>
@ -1757,7 +1771,7 @@ Address: %4 @@ -1757,7 +1771,7 @@ Address: %4
<translation>Transaction</translation>
</message>
<message>
<location line="+5"/>
<location line="+3"/>
<source>Inputs</source>
<translation>Inputs</translation>
</message>
@ -1777,7 +1791,7 @@ Address: %4 @@ -1777,7 +1791,7 @@ Address: %4
<translation>false</translation>
</message>
<message>
<location line="-211"/>
<location line="-209"/>
<source>, has not been successfully broadcast yet</source>
<translation>, has not been successfully broadcast yet</translation>
</message>
@ -2099,32 +2113,32 @@ Address: %4 @@ -2099,32 +2113,32 @@ Address: %4
<context>
<name>bitcoin-core</name>
<message>
<location filename="../bitcoinstrings.cpp" line="+71"/>
<location filename="../bitcoinstrings.cpp" line="+86"/>
<source>Bitcoin version</source>
<translation>Bitcoin version</translation>
</message>
<message>
<location line="+82"/>
<location line="+81"/>
<source>Usage:</source>
<translation>Usage:</translation>
</message>
<message>
<location line="-25"/>
<location line="-24"/>
<source>Send command to -server or bitcoind</source>
<translation>Send command to -server or bitcoind</translation>
</message>
<message>
<location line="-19"/>
<location line="-20"/>
<source>List commands</source>
<translation>List commands</translation>
</message>
<message>
<location line="-11"/>
<location line="-10"/>
<source>Get help for a command</source>
<translation>Get help for a command</translation>
</message>
<message>
<location line="+20"/>
<location line="+19"/>
<source>Options:</source>
<translation>Options:</translation>
</message>
@ -2139,7 +2153,7 @@ Address: %4 @@ -2139,7 +2153,7 @@ Address: %4
<translation>Specify pid file (default: bitcoind.pid)</translation>
</message>
<message>
<location line="-47"/>
<location line="-46"/>
<source>Generate coins</source>
<translation>Generate coins</translation>
</message>
@ -2149,20 +2163,15 @@ Address: %4 @@ -2149,20 +2163,15 @@ Address: %4
<translation>Don&apos;t generate coins</translation>
</message>
<message>
<location line="+60"/>
<location line="+59"/>
<source>Specify data directory</source>
<translation>Specify data directory</translation>
</message>
<message>
<location line="-8"/>
<location line="-7"/>
<source>Set database cache size in megabytes (default: 25)</source>
<translation>Set database cache size in megabytes (default: 25)</translation>
</message>
<message>
<location line="+1"/>
<source>Set database disk log size in megabytes (default: 100)</source>
<translation>Set database disk log size in megabytes (default: 100)</translation>
</message>
<message>
<location line="-26"/>
<source>Listen for connections on &lt;port&gt; (default: 8333 or testnet: 18333)</source>
@ -2174,85 +2183,115 @@ Address: %4 @@ -2174,85 +2183,115 @@ Address: %4
<translation>Maintain at most &lt;n&gt; connections to peers (default: 125)</translation>
</message>
<message>
<location line="-33"/>
<location line="-32"/>
<source>Connect to a node to retrieve peer addresses, and disconnect</source>
<translation>Connect to a node to retrieve peer addresses, and disconnect</translation>
</message>
<message>
<location line="+64"/>
<location line="+63"/>
<source>Specify your own public address</source>
<translation>Specify your own public address</translation>
</message>
<message>
<location line="-75"/>
<source>Bind to given address. Use [host]:port notation for IPv6</source>
<translation>Bind to given address. Use [host]:port notation for IPv6</translation>
</message>
<message>
<location line="+77"/>
<location line="+2"/>
<source>Threshold for disconnecting misbehaving peers (default: 100)</source>
<translation>Threshold for disconnecting misbehaving peers (default: 100)</translation>
</message>
<message>
<location line="-104"/>
<location line="-113"/>
<source>Number of seconds to keep misbehaving peers from reconnecting (default: 86400)</source>
<translation>Number of seconds to keep misbehaving peers from reconnecting (default: 86400)</translation>
</message>
<message>
<location line="-19"/>
<location line="-26"/>
<source>An error occurred while setting up the RPC port %u for listening on IPv4: %s</source>
<translation>An error occurred while setting up the RPC port %u for listening on IPv4: %s</translation>
</message>
<message>
<location line="+5"/>
<source>Detach block and address databases. Increases shutdown time (default: 0)</source>
<translation>Detach block and address databases. Increases shutdown time (default: 0)</translation>
</message>
<message>
<location line="+12"/>
<location line="+24"/>
<source>Listen for JSON-RPC connections on &lt;port&gt; (default: 8332 or testnet: 18332)</source>
<translation>Listen for JSON-RPC connections on &lt;port&gt; (default: 8332 or testnet: 18332)</translation>
</message>
<message>
<location line="+24"/>
<location line="+34"/>
<source>Accept command line and JSON-RPC commands</source>
<translation>Accept command line and JSON-RPC commands</translation>
</message>
<message>
<location line="+36"/>
<source>Importing blockchain data file.</source>
<translation>Importing blockchain data file.</translation>
</message>
<message>
<location line="+1"/>
<source>Importing bootstrap blockchain data file.</source>
<translation>Importing bootstrap blockchain data file.</translation>
</message>
<message>
<location line="+23"/>
<location line="+60"/>
<source>Run in the background as a daemon and accept commands</source>
<translation>Run in the background as a daemon and accept commands</translation>
</message>
<message>
<location line="+33"/>
<location line="+32"/>
<source>Use the test network</source>
<translation>Use the test network</translation>
</message>
<message>
<location line="-92"/>
<location line="-91"/>
<source>Accept connections from outside (default: 1 if no -proxy or -connect)</source>
<translation>Accept connections from outside (default: 1 if no -proxy or -connect)</translation>
</message>
<message>
<location line="-45"/>
<location line="-72"/>
<source>%s, you must set a rpcpassword in the configuration file:
%s
It is recommended you use the following random password:
rpcuser=bitcoinrpc
rpcpassword=%s
(you do not need to remember this password)
The username and password MUST NOT be the same.
If the file does not exist, create it with owner-readable-only file permissions.
</source>
<translation>%s, you must set a rpcpassword in the configuration file:
%s
It is recommended you use the following random password:
rpcuser=bitcoinrpc
rpcpassword=%s
(you do not need to remember this password)
The username and password MUST NOT be the same.
If the file does not exist, create it with owner-readable-only file permissions.</translation>
</message>
<message>
<location line="+15"/>
<source>An error occurred while setting up the RPC port %u for listening on IPv6, falling back to IPv4: %s</source>
<translation>An error occurred while setting up the RPC port %u for listening on IPv6, falling back to IPv4: %s</translation>
</message>
<message>
<location line="+25"/>
<location line="+3"/>
<source>Bind to given address and always listen on it. Use [host]:port notation for IPv6</source>
<translation>Bind to given address and always listen on it. Use [host]:port notation for IPv6</translation>
</message>
<message>
<location line="+3"/>
<source>Cannot obtain a lock on data directory %s. Bitcoin is probably already running.</source>
<translation>Cannot obtain a lock on data directory %s. Bitcoin is probably already running.</translation>
</message>
<message>
<location line="+3"/>
<source>Error initializing database environment %s! To recover, BACKUP THAT DIRECTORY, then remove everything from it except for wallet.dat.</source>
<translation>Error initializing database environment %s! To recover, BACKUP THAT DIRECTORY, then remove everything from it except for wallet.dat.</translation>
</message>
<message>
<location line="+3"/>
<source>Error: The transaction was rejected! This might happen if some of the coins in your wallet were already spent, such as if you used a copy of wallet.dat and coins were spent in the copy but not marked as spent here.</source>
<translation>Error: The transaction was rejected! This might happen if some of the coins in your wallet were already spent, such as if you used a copy of wallet.dat and coins were spent in the copy but not marked as spent here.</translation>
</message>
<message>
<location line="+4"/>
<source>Error: This transaction requires a transaction fee of at least %s because of its amount, complexity, or use of recently received funds!</source>
<translation>Error: This transaction requires a transaction fee of at least %s because of its amount, complexity, or use of recently received funds!</translation>
</message>
<message>
<location line="+11"/>
<source>Set maximum size of high-priority/low-fee transactions in bytes (default: 27000)</source>
<translation>Set maximum size of high-priority/low-fee transactions in bytes (default: 27000)</translation>
</message>
<message>
<location line="+3"/>
<source>This is a pre-release test build - use at your own risk - do not use for mining or merchant applications</source>
<translation>This is a pre-release test build - use at your own risk - do not use for mining or merchant applications</translation>
</message>
<message>
<location line="+5"/>
<source>Warning: -paytxfee is set very high! This is the transaction fee you will pay if you send a transaction.</source>
@ -2269,7 +2308,22 @@ Address: %4 @@ -2269,7 +2308,22 @@ Address: %4
<translation>Warning: Please check that your computer&apos;s date and time are correct! If your clock is wrong Bitcoin will not work properly.</translation>
</message>
<message>
<location line="+16"/>
<location line="+3"/>
<source>Warning: error reading wallet.dat! All keys read correctly, but transaction data or address book entries might be missing or incorrect.</source>
<translation>Warning: error reading wallet.dat! All keys read correctly, but transaction data or address book entries might be missing or incorrect.</translation>
</message>
<message>
<location line="+3"/>
<source>Warning: wallet.dat corrupt, data salvaged! Original wallet.dat saved as wallet.{timestamp}.bak in %s; if your balance or transactions are incorrect you should restore from a backup.</source>
<translation>Warning: wallet.dat corrupt, data salvaged! Original wallet.dat saved as wallet.{timestamp}.bak in %s; if your balance or transactions are incorrect you should restore from a backup.</translation>
</message>
<message>
<location line="+14"/>
<source>Attempt to recover private keys from a corrupt wallet.dat</source>
<translation>Attempt to recover private keys from a corrupt wallet.dat</translation>
</message>
<message>
<location line="+3"/>
<source>Block creation options:</source>
<translation>Block creation options:</translation>
</message>
@ -2284,7 +2338,17 @@ Address: %4 @@ -2284,7 +2338,17 @@ Address: %4
<translation>Discover own IP address (default: 1 when listening and no -externalip)</translation>
</message>
<message>
<location line="+11"/>
<location line="+8"/>
<source>Error: Transaction creation failed!</source>
<translation>Error: Transaction creation failed!</translation>
</message>
<message>
<location line="+1"/>
<source>Error: Wallet locked, unable to create transaction!</source>
<translation>Error: Wallet locked, unable to create transaction!</translation>
</message>
<message>
<location line="+2"/>
<source>Failed to listen on any port. Use -listen=0 if you want this.</source>
<translation>Failed to listen on any port. Use -listen=0 if you want this.</translation>
</message>
@ -2294,7 +2358,12 @@ Address: %4 @@ -2294,7 +2358,12 @@ Address: %4
<translation>Find peers using DNS lookup (default: 1 unless -connect)</translation>
</message>
<message>
<location line="+11"/>
<location line="+6"/>
<source>Importing blocks from block database...</source>
<translation>Importing blocks from block database...</translation>
</message>
<message>
<location line="+4"/>
<source>Invalid -tor address: &apos;%s&apos;</source>
<translation>Invalid -tor address: &apos;%s&apos;</translation>
</message>
@ -2328,6 +2397,11 @@ Address: %4 @@ -2328,6 +2397,11 @@ Address: %4
<source>Prepend debug output with timestamp</source>
<translation>Prepend debug output with timestamp</translation>
</message>
<message>
<location line="+1"/>
<source>Rebuild blockchain index from current blk000??.dat files</source>
<translation>Rebuild blockchain index from current blk000??.dat files</translation>
</message>
<message>
<location line="+4"/>
<source>SSL options: (see the Bitcoin Wiki for SSL setup instructions)</source>
@ -2349,7 +2423,7 @@ Address: %4 @@ -2349,7 +2423,7 @@ Address: %4
<translation>Send trace/debug info to debugger</translation>
</message>
<message>
<location line="+7"/>
<location line="+6"/>
<source>Set maximum block size in bytes (default: 250000)</source>
<translation>Set maximum block size in bytes (default: 250000)</translation>
</message>
@ -2388,6 +2462,11 @@ Address: %4 @@ -2388,6 +2462,11 @@ Address: %4
<source>Username for JSON-RPC connections</source>
<translation>Username for JSON-RPC connections</translation>
</message>
<message>
<location line="+1"/>
<source>Verifying database integrity...</source>
<translation>Verifying database integrity...</translation>
</message>
<message>
<location line="+2"/>
<source>Warning: Disk space is low!</source>
@ -2399,12 +2478,17 @@ Address: %4 @@ -2399,12 +2478,17 @@ Address: %4
<translation>Warning: This version is obsolete, upgrade required!</translation>
</message>
<message>
<location line="-41"/>
<location line="+1"/>
<source>wallet.dat corrupt, salvage failed</source>
<translation>wallet.dat corrupt, salvage failed</translation>
</message>
<message>
<location line="-43"/>
<source>Password for JSON-RPC connections</source>
<translation>Password for JSON-RPC connections</translation>
</message>
<message>
<location line="-52"/>
<location line="-51"/>
<source>Allow JSON-RPC connections from specified IP address</source>
<translation>Allow JSON-RPC connections from specified IP address</translation>
</message>
@ -2414,12 +2498,12 @@ Address: %4 @@ -2414,12 +2498,12 @@ Address: %4
<translation>Send commands to node running on &lt;ip&gt; (default: 127.0.0.1)</translation>
</message>
<message>
<location line="-91"/>
<location line="-101"/>
<source>Execute command when the best block changes (%s in cmd is replaced by block hash)</source>
<translation>Execute command when the best block changes (%s in cmd is replaced by block hash)</translation>
</message>
<message>
<location line="+114"/>
<location line="+123"/>
<source>Upgrade wallet to latest format</source>
<translation>Upgrade wallet to latest format</translation>
</message>
@ -2429,7 +2513,7 @@ Address: %4 @@ -2429,7 +2513,7 @@ Address: %4
<translation>Set key pool size to &lt;n&gt; (default: 100)</translation>
</message>
<message>
<location line="-14"/>
<location line="-13"/>
<source>Rescan the block chain for missing wallet transactions</source>
<translation>Rescan the block chain for missing wallet transactions</translation>
</message>
@ -2444,7 +2528,7 @@ Address: %4 @@ -2444,7 +2528,7 @@ Address: %4
<translation>How thorough the block verification is (0-6, default: 1)</translation>
</message>
<message>
<location line="+3"/>
<location line="+2"/>
<source>Imports blocks from external blk000?.dat file</source>
<translation>Imports blocks from external blk000?.dat file</translation>
</message>
@ -2454,7 +2538,7 @@ Address: %4 @@ -2454,7 +2538,7 @@ Address: %4
<translation>Use OpenSSL (https) for JSON-RPC connections</translation>
</message>
<message>
<location line="-21"/>
<location line="-20"/>
<source>Server certificate file (default: server.cert)</source>
<translation>Server certificate file (default: server.cert)</translation>
</message>
@ -2464,32 +2548,27 @@ Address: %4 @@ -2464,32 +2548,27 @@ Address: %4
<translation>Server private key (default: server.pem)</translation>
</message>
<message>
<location line="-116"/>
<location line="-130"/>
<source>Acceptable ciphers (default: TLSv1+HIGH:!SSLv2:!aNULL:!eNULL:!AH:!3DES:@STRENGTH)</source>
<translation>Acceptable ciphers (default: TLSv1+HIGH:!SSLv2:!aNULL:!eNULL:!AH:!3DES:@STRENGTH)</translation>
</message>
<message>
<location line="+128"/>
<location line="+141"/>
<source>This help message</source>
<translation>This help message</translation>
</message>
<message>
<location line="-120"/>
<source>Cannot obtain a lock on data directory %s. Bitcoin is probably already running.</source>
<translation>Cannot obtain a lock on data directory %s. Bitcoin is probably already running.</translation>
</message>
<message>
<location line="+46"/>
<location line="-73"/>
<source>Bitcoin</source>
<translation>Bitcoin</translation>
</message>
<message>
<location line="+77"/>
<location line="+76"/>
<source>Unable to bind to %s on this computer (bind returned error %d, %s)</source>
<translation>Unable to bind to %s on this computer (bind returned error %d, %s)</translation>
</message>
<message>
<location line="-69"/>
<location line="-68"/>
<source>Connect through socks proxy</source>
<translation>Connect through socks proxy</translation>
</message>
@ -2499,12 +2578,12 @@ Address: %4 @@ -2499,12 +2578,12 @@ Address: %4
<translation>Allow DNS lookups for -addnode, -seednode and -connect</translation>
</message>
<message>
<location line="+43"/>
<location line="+42"/>
<source>Loading addresses...</source>
<translation>Loading addresses...</translation>
</message>
<message>
<location line="-26"/>
<location line="-25"/>
<source>Error loading blkindex.dat</source>
<translation>Error loading blkindex.dat</translation>
</message>
@ -2529,7 +2608,7 @@ Address: %4 @@ -2529,7 +2608,7 @@ Address: %4
<translation>Error loading wallet.dat</translation>
</message>
<message>
<location line="+19"/>
<location line="+18"/>
<source>Invalid -proxy address: &apos;%s&apos;</source>
<translation>Invalid -proxy address: &apos;%s&apos;</translation>
</message>
@ -2544,7 +2623,7 @@ Address: %4 @@ -2544,7 +2623,7 @@ Address: %4
<translation>Unknown -socks proxy version requested: %i</translation>
</message>
<message>
<location line="-74"/>
<location line="-73"/>
<source>Cannot resolve -bind address: &apos;%s&apos;</source>
<translation>Cannot resolve -bind address: &apos;%s&apos;</translation>
</message>
@ -2554,42 +2633,22 @@ Address: %4 @@ -2554,42 +2633,22 @@ Address: %4
<translation>Cannot resolve -externalip address: &apos;%s&apos;</translation>
</message>
<message>
<location line="+30"/>
<location line="+29"/>
<source>Invalid amount for -paytxfee=&lt;amount&gt;: &apos;%s&apos;</source>
<translation>Invalid amount for -paytxfee=&lt;amount&gt;: &apos;%s&apos;</translation>
</message>
<message>
<location line="-15"/>
<location line="-14"/>
<source>Error: could not start node</source>
<translation>Error: could not start node</translation>
</message>
<message>
<location line="-1"/>
<source>Error: Wallet locked, unable to create transaction </source>
<translation>Error: Wallet locked, unable to create transaction </translation>
</message>
<message>
<location line="-56"/>
<source>Error: This transaction requires a transaction fee of at least %s because of its amount, complexity, or use of recently received funds </source>
<translation>Error: This transaction requires a transaction fee of at least %s because of its amount, complexity, or use of recently received funds </translation>
</message>
<message>
<location line="+55"/>
<source>Error: Transaction creation failed </source>
<translation>Error: Transaction creation failed </translation>
</message>
<message>
<location line="+42"/>
<location line="+40"/>
<source>Sending...</source>
<translation>Sending...</translation>
</message>
<message>
<location line="-101"/>
<source>Error: The transaction was rejected. This might happen if some of the coins in your wallet were already spent, such as if you used a copy of wallet.dat and coins were spent in the copy but not marked as spent here.</source>
<translation>Error: The transaction was rejected. This might happen if some of the coins in your wallet were already spent, such as if you used a copy of wallet.dat and coins were spent in the copy but not marked as spent here.</translation>
</message>
<message>
<location line="+77"/>
<location line="-25"/>
<source>Invalid amount</source>
<translation>Invalid amount</translation>
</message>
@ -2604,17 +2663,17 @@ Address: %4 @@ -2604,17 +2663,17 @@ Address: %4
<translation>Loading block index...</translation>
</message>
<message>
<location line="-45"/>
<location line="-44"/>
<source>Add a node to connect to and attempt to keep the connection open</source>
<translation>Add a node to connect to and attempt to keep the connection open</translation>
</message>
<message>
<location line="-18"/>
<location line="-25"/>
<source>Unable to bind to %s on this computer. Bitcoin is probably already running.</source>
<translation>Unable to bind to %s on this computer. Bitcoin is probably already running.</translation>
</message>
<message>
<location line="+47"/>
<location line="+54"/>
<source>Find peers using internet relay chat (default: 0)</source>
<translation>Find peers using internet relay chat (default: 0)</translation>
</message>
@ -2624,12 +2683,12 @@ Address: %4 @@ -2624,12 +2683,12 @@ Address: %4
<translation>Fee per KB to add to transactions you send</translation>
</message>
<message>
<location line="+19"/>
<location line="+18"/>
<source>Loading wallet...</source>
<translation>Loading wallet...</translation>
</message>
<message>
<location line="-39"/>
<location line="-38"/>
<source>Cannot downgrade wallet</source>
<translation>Cannot downgrade wallet</translation>
</message>
@ -2654,31 +2713,12 @@ Address: %4 @@ -2654,31 +2713,12 @@ Address: %4
<translation>Done loading</translation>
</message>
<message>
<location line="+64"/>
<location line="+63"/>
<source>To use the %s option</source>
<translation>To use the %s option</translation>
</message>
<message>
<location line="-139"/>
<source>%s, you must set a rpcpassword in the configuration file:
%s
It is recommended you use the following random password:
rpcuser=bitcoinrpc
rpcpassword=%s
(you do not need to remember this password)
If the file does not exist, create it with owner-readable-only file permissions.
</source>
<translation>%s, you must set a rpcpassword in the configuration file:
%s
It is recommended you use the following random password:
rpcuser=bitcoinrpc
rpcpassword=%s
(you do not need to remember this password)
If the file does not exist, create it with owner-readable-only file permissions.
</translation>
</message>
<message>
<location line="+80"/>
<location line="-58"/>
<source>Error</source>
<translation>Error</translation>
</message>

Loading…
Cancel
Save