d4708
/
source-engine
mirror of https://github.com/nillerusr/source-engine.git
1
0
Fork 0
Code Issues Projects Releases Wiki Activity
Modified source engine (2017) developed by valve and leaked in 2020. Not for commercial purporses
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
145 Commits
25 Branches
6 Tags
221 MiB
 
 
 
 
 
 
Tree: ab5c1c0b3a
Branches Tags
${ item.name }
Create tag ${ searchTerm }
Create branch ${ searchTerm }
from 'ab5c1c0b3a'
${ noResults }
source-engine/public/mathlib/mathlib.h

2186 lines
66 KiB
Raw Blame History Escape

//========= Copyright Valve Corporation, All rights reserved. ============//
//
// Purpose:
//
//===========================================================================//
#ifndef MATH_LIB_H
#define MATH_LIB_H
#include <math.h>
#include "minmax.h"
#include "tier0/basetypes.h"
#include "tier0/commonmacros.h"
#include "mathlib/vector.h"
#include "mathlib/vector2d.h"
#include "tier0/dbg.h"
#include "mathlib/math_pfns.h"
#if defined(__i386__) || defined(_M_IX86)
// For MMX intrinsics
#include <xmmintrin.h>
#endif
// XXX remove me
#undef clamp
// Uncomment this to enable FP exceptions in parts of the code.
// This can help track down FP bugs. However the code is not
// FP exception clean so this not a turnkey operation.
//#define FP_EXCEPTIONS_ENABLED
#ifdef FP_EXCEPTIONS_ENABLED
#include <float.h> // For _clearfp and _controlfp_s
#endif
// FPExceptionDisabler and FPExceptionEnabler taken from my blog post
// at http://www.altdevblogaday.com/2012/04/20/exceptional-floating-point/
// Declare an object of this type in a scope in order to suppress
// all floating-point exceptions temporarily. The old exception
// state will be reset at the end.
class FPExceptionDisabler
{
public:
#ifdef FP_EXCEPTIONS_ENABLED
FPExceptionDisabler();
~FPExceptionDisabler();
private:
unsigned int mOldValues;
#else
FPExceptionDisabler() {}
~FPExceptionDisabler() {}
#endif
private:
// Make the copy constructor and assignment operator private
// and unimplemented to prohibit copying.
FPExceptionDisabler(const FPExceptionDisabler&);
FPExceptionDisabler& operator=(const FPExceptionDisabler&);
};
// Declare an object of this type in a scope in order to enable a
// specified set of floating-point exceptions temporarily. The old
// exception state will be reset at the end.
// This class can be nested.
class FPExceptionEnabler
{
public:
// Overflow, divide-by-zero, and invalid-operation are the FP
// exceptions most frequently associated with bugs.
#ifdef FP_EXCEPTIONS_ENABLED
FPExceptionEnabler(unsigned int enableBits = _EM_OVERFLOW | _EM_ZERODIVIDE | _EM_INVALID);
~FPExceptionEnabler();
private:
unsigned int mOldValues;
#else
FPExceptionEnabler(unsigned int enableBits = 0)
{
}
~FPExceptionEnabler()
{
}
#endif
private:
// Make the copy constructor and assignment operator private
// and unimplemented to prohibit copying.
FPExceptionEnabler(const FPExceptionEnabler&);
FPExceptionEnabler& operator=(const FPExceptionEnabler&);
};
#ifdef DEBUG // stop crashing edit-and-continue
FORCEINLINE float clamp( float val, float minVal, float maxVal )
{
if ( maxVal < minVal )
return maxVal;
else if( val < minVal )
return minVal;
else if( val > maxVal )
return maxVal;
else
return val;
}
#else // DEBUG
FORCEINLINE float clamp( float val, float minVal, float maxVal )
{
#if defined(__i386__) || defined(_M_IX86)
_mm_store_ss( &val,
_mm_min_ss(
_mm_max_ss(
_mm_load_ss(&val),
_mm_load_ss(&minVal) ),
_mm_load_ss(&maxVal) ) );
#else
val = fpmax(minVal, val);
val = fpmin(maxVal, val);
#endif
return val;
}
#endif // DEBUG
//
// Returns a clamped value in the range [min, max].
//
template< class T >
inline T clamp( T const &val, T const &minVal, T const &maxVal )
{
if ( maxVal < minVal )
return maxVal;
else if( val < minVal )
return minVal;
else if( val > maxVal )
return maxVal;
else
return val;
}
// plane_t structure
// !!! if this is changed, it must be changed in asm code too !!!
// FIXME: does the asm code even exist anymore?
// FIXME: this should move to a different file
struct cplane_t
{
Vector normal;
float dist;
byte type; // for fast side tests
byte signbits; // signx + (signy<<1) + (signz<<1)
byte pad[2];
#ifdef VECTOR_NO_SLOW_OPERATIONS
cplane_t() {}
private:
// No copy constructors allowed if we're in optimal mode
cplane_t(const cplane_t& vOther);
#endif
};
// structure offset for asm code
#define CPLANE_NORMAL_X 0
#define CPLANE_NORMAL_Y 4
#define CPLANE_NORMAL_Z 8
#define CPLANE_DIST 12
#define CPLANE_TYPE 16
#define CPLANE_SIGNBITS 17
#define CPLANE_PAD0 18
#define CPLANE_PAD1 19
// 0-2 are axial planes
#define PLANE_X 0
#define PLANE_Y 1
#define PLANE_Z 2
// 3-5 are non-axial planes snapped to the nearest
#define PLANE_ANYX 3
#define PLANE_ANYY 4
#define PLANE_ANYZ 5
//-----------------------------------------------------------------------------
// Frustum plane indices.
// WARNING: there is code that depends on these values
//-----------------------------------------------------------------------------
enum
{
FRUSTUM_RIGHT = 0,
FRUSTUM_LEFT = 1,
FRUSTUM_TOP = 2,
FRUSTUM_BOTTOM = 3,
FRUSTUM_NEARZ = 4,
FRUSTUM_FARZ = 5,
FRUSTUM_NUMPLANES = 6
};
extern int SignbitsForPlane( cplane_t *out );
class Frustum_t
{
public:
void SetPlane( int i, int nType, const Vector &vecNormal, float dist )
{
m_Plane[i].normal = vecNormal;
m_Plane[i].dist = dist;
m_Plane[i].type = nType;
m_Plane[i].signbits = SignbitsForPlane( &m_Plane[i] );
m_AbsNormal[i].Init( fabs(vecNormal.x), fabs(vecNormal.y), fabs(vecNormal.z) );
}
inline const cplane_t *GetPlane( int i ) const { return &m_Plane[i]; }
inline const Vector &GetAbsNormal( int i ) const { return m_AbsNormal[i]; }
private:
cplane_t m_Plane[FRUSTUM_NUMPLANES];
Vector m_AbsNormal[FRUSTUM_NUMPLANES];
};
// Computes Y fov from an X fov and a screen aspect ratio + X from Y
float CalcFovY( float flFovX, float flScreenAspect );
float CalcFovX( float flFovY, float flScreenAspect );
// Generate a frustum based on perspective view parameters
// NOTE: FOV is specified in degrees, as the *full* view angle (not half-angle)
void GeneratePerspectiveFrustum( const Vector& origin, const QAngle &angles, float flZNear, float flZFar, float flFovX, float flAspectRatio, Frustum_t &frustum );
void GeneratePerspectiveFrustum( const Vector& origin, const Vector &forward, const Vector &right, const Vector &up, float flZNear, float flZFar, float flFovX, float flFovY, Frustum_t &frustum );
// Cull the world-space bounding box to the specified frustum.
bool R_CullBox( const Vector& mins, const Vector& maxs, const Frustum_t &frustum );
bool R_CullBoxSkipNear( const Vector& mins, const Vector& maxs, const Frustum_t &frustum );
struct matrix3x4_t
{
matrix3x4_t() {}
matrix3x4_t(
float m00, float m01, float m02, float m03,
float m10, float m11, float m12, float m13,
float m20, float m21, float m22, float m23 )
{
m_flMatVal[0][0] = m00; m_flMatVal[0][1] = m01; m_flMatVal[0][2] = m02; m_flMatVal[0][3] = m03;
m_flMatVal[1][0] = m10; m_flMatVal[1][1] = m11; m_flMatVal[1][2] = m12; m_flMatVal[1][3] = m13;
m_flMatVal[2][0] = m20; m_flMatVal[2][1] = m21; m_flMatVal[2][2] = m22; m_flMatVal[2][3] = m23;
}
//-----------------------------------------------------------------------------
// Creates a matrix where the X axis = forward
// the Y axis = left, and the Z axis = up
//-----------------------------------------------------------------------------
void Init( const Vector& xAxis, const Vector& yAxis, const Vector& zAxis, const Vector &vecOrigin )
{
m_flMatVal[0][0] = xAxis.x; m_flMatVal[0][1] = yAxis.x; m_flMatVal[0][2] = zAxis.x; m_flMatVal[0][3] = vecOrigin.x;
m_flMatVal[1][0] = xAxis.y; m_flMatVal[1][1] = yAxis.y; m_flMatVal[1][2] = zAxis.y; m_flMatVal[1][3] = vecOrigin.y;
m_flMatVal[2][0] = xAxis.z; m_flMatVal[2][1] = yAxis.z; m_flMatVal[2][2] = zAxis.z; m_flMatVal[2][3] = vecOrigin.z;
}
//-----------------------------------------------------------------------------
// Creates a matrix where the X axis = forward
// the Y axis = left, and the Z axis = up
//-----------------------------------------------------------------------------
matrix3x4_t( const Vector& xAxis, const Vector& yAxis, const Vector& zAxis, const Vector &vecOrigin )
{
Init( xAxis, yAxis, zAxis, vecOrigin );
}
inline void Invalidate( void )
{
for (int i = 0; i < 3; i++)
{
for (int j = 0; j < 4; j++)
{
m_flMatVal[i][j] = VEC_T_NAN;
}
}
}
float *operator[]( int i ) { Assert(( i >= 0 ) && ( i < 3 )); return m_flMatVal[i]; }
const float *operator[]( int i ) const { Assert(( i >= 0 ) && ( i < 3 )); return m_flMatVal[i]; }
float *Base() { return &m_flMatVal[0][0]; }
const float *Base() const { return &m_flMatVal[0][0]; }
float m_flMatVal[3][4];
};
#ifndef M_PI
#define M_PI 3.14159265358979323846 // matches value in gcc v2 math.h
#endif
#define M_PI_F ((float)(M_PI)) // Shouldn't collide with anything.
// NJS: Inlined to prevent floats from being autopromoted to doubles, as with the old system.
#ifndef RAD2DEG
#define RAD2DEG( x ) ( (float)(x) * (float)(180.f / M_PI_F) )
#endif
#ifndef DEG2RAD
#define DEG2RAD( x ) ( (float)(x) * (float)(M_PI_F / 180.f) )
#endif
// Used to represent sides of things like planes.
#define SIDE_FRONT 0
#define SIDE_BACK 1
#define SIDE_ON 2
#define SIDE_CROSS -2 // necessary for polylib.c
#define ON_VIS_EPSILON 0.01 // necessary for vvis (flow.c) -- again look into moving later!
#define EQUAL_EPSILON 0.001 // necessary for vbsp (faces.c) -- should look into moving it there?
extern bool s_bMathlibInitialized;
extern const Vector vec3_origin;
extern const QAngle vec3_angle;
extern const Quaternion quat_identity;
extern const Vector vec3_invalid;
extern const int nanmask;
#define IS_NAN(x) (((*(int *)&x)&nanmask)==nanmask)
FORCEINLINE vec_t DotProduct(const vec_t *v1, const vec_t *v2)
{
return v1[0]*v2[0] + v1[1]*v2[1] + v1[2]*v2[2];
}
FORCEINLINE void VectorSubtract(const vec_t *a, const vec_t *b, vec_t *c)
{
c[0]=a[0]-b[0];
c[1]=a[1]-b[1];
c[2]=a[2]-b[2];
}
FORCEINLINE void VectorAdd(const vec_t *a, const vec_t *b, vec_t *c)
{
c[0]=a[0]+b[0];
c[1]=a[1]+b[1];
c[2]=a[2]+b[2];
}
FORCEINLINE void VectorCopy(const vec_t *a, vec_t *b)
{
b[0]=a[0];
b[1]=a[1];
b[2]=a[2];
}
FORCEINLINE void VectorClear(vec_t *a)
{
a[0]=a[1]=a[2]=0;
}
FORCEINLINE float VectorMaximum(const vec_t *v)
{
return max( v[0], max( v[1], v[2] ) );
}
FORCEINLINE float VectorMaximum(const Vector& v)
{
return max( v.x, max( v.y, v.z ) );
}
FORCEINLINE void VectorScale (const float* in, vec_t scale, float* out)
{
out[0] = in[0]*scale;
out[1] = in[1]*scale;
out[2] = in[2]*scale;
}
// Cannot be forceinline as they have overloads:
inline void VectorFill(vec_t *a, float b)
{
a[0]=a[1]=a[2]=b;
}
inline void VectorNegate(vec_t *a)
{
a[0]=-a[0];
a[1]=-a[1];
a[2]=-a[2];
}
//#define VectorMaximum(a) ( max( (a)[0], max( (a)[1], (a)[2] ) ) )
#define Vector2Clear(x) {(x)[0]=(x)[1]=0;}
#define Vector2Negate(x) {(x)[0]=-((x)[0]);(x)[1]=-((x)[1]);}
#define Vector2Copy(a,b) {(b)[0]=(a)[0];(b)[1]=(a)[1];}
#define Vector2Subtract(a,b,c) {(c)[0]=(a)[0]-(b)[0];(c)[1]=(a)[1]-(b)[1];}
#define Vector2Add(a,b,c) {(c)[0]=(a)[0]+(b)[0];(c)[1]=(a)[1]+(b)[1];}
#define Vector2Scale(a,b,c) {(c)[0]=(b)*(a)[0];(c)[1]=(b)*(a)[1];}
// NJS: Some functions in VBSP still need to use these for dealing with mixing vec4's and shorts with vec_t's.
// remove when no longer needed.
#define VECTOR_COPY( A, B ) do { (B)[0] = (A)[0]; (B)[1] = (A)[1]; (B)[2]=(A)[2]; } while(0)
#define DOT_PRODUCT( A, B ) ( (A)[0]*(B)[0] + (A)[1]*(B)[1] + (A)[2]*(B)[2] )
FORCEINLINE void VectorMAInline( const float* start, float scale, const float* direction, float* dest )
{
dest[0]=start[0]+direction[0]*scale;
dest[1]=start[1]+direction[1]*scale;
dest[2]=start[2]+direction[2]*scale;
}
FORCEINLINE void VectorMAInline( const Vector& start, float scale, const Vector& direction, Vector& dest )
{
dest.x=start.x+direction.x*scale;
dest.y=start.y+direction.y*scale;
dest.z=start.z+direction.z*scale;
}
FORCEINLINE void VectorMA( const Vector& start, float scale, const Vector& direction, Vector& dest )
{
VectorMAInline(start, scale, direction, dest);
}
FORCEINLINE void VectorMA( const float * start, float scale, const float *direction, float *dest )
{
VectorMAInline(start, scale, direction, dest);
}
int VectorCompare (const float *v1, const float *v2);
inline float VectorLength(const float *v)
{
return FastSqrt( v[0]*v[0] + v[1]*v[1] + v[2]*v[2] + FLT_EPSILON );
}
void CrossProduct (const float *v1, const float *v2, float *cross);
qboolean VectorsEqual( const float *v1, const float *v2 );
inline vec_t RoundInt (vec_t in)
{
return floor(in + 0.5f);
}
int Q_log2(int val);
// Math routines done in optimized assembly math package routines
void inline SinCos( float radians, float *sine, float *cosine )
{
#if defined( _X360 )
XMScalarSinCos( sine, cosine, radians );
#elif defined( PLATFORM_WINDOWS_PC32 )
_asm
{
fld DWORD PTR [radians]
fsincos
mov edx, DWORD PTR [cosine]
mov eax, DWORD PTR [sine]
fstp DWORD PTR [edx]
fstp DWORD PTR [eax]
}
#elif defined( PLATFORM_WINDOWS_PC64 )
*sine = sin( radians );
*cosine = cos( radians );
#elif defined( POSIX )
sincosf(radians, sine, cosine);
#endif
}
#define SIN_TABLE_SIZE 256
#define FTOIBIAS 12582912.f
extern float SinCosTable[SIN_TABLE_SIZE];
inline float TableCos( float theta )
{
union
{
int i;
float f;
} ftmp;
// ideally, the following should compile down to: theta * constant + constant, changing any of these constants from defines sometimes fubars this.
ftmp.f = theta * ( float )( SIN_TABLE_SIZE / ( 2.0f * M_PI ) ) + ( FTOIBIAS + ( SIN_TABLE_SIZE / 4 ) );
return SinCosTable[ ftmp.i & ( SIN_TABLE_SIZE - 1 ) ];
}
inline float TableSin( float theta )
{
union
{
int i;
float f;
} ftmp;
// ideally, the following should compile down to: theta * constant + constant
ftmp.f = theta * ( float )( SIN_TABLE_SIZE / ( 2.0f * M_PI ) ) + FTOIBIAS;
return SinCosTable[ ftmp.i & ( SIN_TABLE_SIZE - 1 ) ];
}
template<class T>
FORCEINLINE T Square( T const &a )
{
return a * a;
}
// return the smallest power of two >= x.
// returns 0 if x == 0 or x > 0x80000000 (ie numbers that would be negative if x was signed)
// NOTE: the old code took an int, and if you pass in an int of 0x80000000 casted to a uint,
// you'll get 0x80000000, which is correct for uints, instead of 0, which was correct for ints
FORCEINLINE uint SmallestPowerOfTwoGreaterOrEqual( uint x )
{
x -= 1;
x |= x >> 1;
x |= x >> 2;
x |= x >> 4;
x |= x >> 8;
x |= x >> 16;
return x + 1;
}
// return the largest power of two <= x. Will return 0 if passed 0
FORCEINLINE uint LargestPowerOfTwoLessThanOrEqual( uint x )
{
if ( x >= 0x80000000 )
return 0x80000000;
return SmallestPowerOfTwoGreaterOrEqual( x + 1 ) >> 1;
}
// Math routines for optimizing division
void FloorDivMod (double numer, double denom, int *quotient, int *rem);
int GreatestCommonDivisor (int i1, int i2);
// Test for FPU denormal mode
bool IsDenormal( const float &val );
// MOVEMENT INFO
enum
{
PITCH = 0, // up / down
YAW, // left / right
ROLL // fall over
};
void MatrixAngles( const matrix3x4_t & matrix, float *angles ); // !!!!
void MatrixVectors( const matrix3x4_t &matrix, Vector* pForward, Vector *pRight, Vector *pUp );
void VectorTransform (const float *in1, const matrix3x4_t & in2, float *out);
void VectorITransform (const float *in1, const matrix3x4_t & in2, float *out);
void VectorRotate( const float *in1, const matrix3x4_t & in2, float *out);
void VectorRotate( const Vector &in1, const QAngle &in2, Vector &out );
void VectorRotate( const Vector &in1, const Quaternion &in2, Vector &out );
void VectorIRotate( const float *in1, const matrix3x4_t & in2, float *out);
#ifndef VECTOR_NO_SLOW_OPERATIONS
QAngle TransformAnglesToLocalSpace( const QAngle &angles, const matrix3x4_t &parentMatrix );
QAngle TransformAnglesToWorldSpace( const QAngle &angles, const matrix3x4_t &parentMatrix );
#endif
void MatrixInitialize( matrix3x4_t &mat, const Vector &vecOrigin, const Vector &vecXAxis, const Vector &vecYAxis, const Vector &vecZAxis );
void MatrixCopy( const matrix3x4_t &in, matrix3x4_t &out );
void MatrixInvert( const matrix3x4_t &in, matrix3x4_t &out );
// Matrix equality test
bool MatricesAreEqual( const matrix3x4_t &src1, const matrix3x4_t &src2, float flTolerance = 1e-5 );
void MatrixGetColumn( const matrix3x4_t &in, int column, Vector &out );
void MatrixSetColumn( const Vector &in, int column, matrix3x4_t &out );
inline void MatrixGetTranslation( const matrix3x4_t &in, Vector &out )
{
MatrixGetColumn ( in, 3, out );
}
inline void MatrixSetTranslation( const Vector &in, matrix3x4_t &out )
{
MatrixSetColumn ( in, 3, out );
}
void MatrixScaleBy ( const float flScale, matrix3x4_t &out );
void MatrixScaleByZero ( matrix3x4_t &out );
//void DecomposeRotation( const matrix3x4_t &mat, float *out );
void ConcatRotations (const matrix3x4_t &in1, const matrix3x4_t &in2, matrix3x4_t &out);
void ConcatTransforms (const matrix3x4_t &in1, const matrix3x4_t &in2, matrix3x4_t &out);
// For identical interface w/ VMatrix
inline void MatrixMultiply ( const matrix3x4_t &in1, const matrix3x4_t &in2, matrix3x4_t &out )
{
ConcatTransforms( in1, in2, out );
}
void QuaternionSlerp( const Quaternion &p, const Quaternion &q, float t, Quaternion &qt );
void QuaternionSlerpNoAlign( const Quaternion &p, const Quaternion &q, float t, Quaternion &qt );
void QuaternionBlend( const Quaternion &p, const Quaternion &q, float t, Quaternion &qt );
void QuaternionBlendNoAlign( const Quaternion &p, const Quaternion &q, float t, Quaternion &qt );
void QuaternionIdentityBlend( const Quaternion &p, float t, Quaternion &qt );
float QuaternionAngleDiff( const Quaternion &p, const Quaternion &q );
void QuaternionScale( const Quaternion &p, float t, Quaternion &q );
void QuaternionAlign( const Quaternion &p, const Quaternion &q, Quaternion &qt );
float QuaternionDotProduct( const Quaternion &p, const Quaternion &q );
void QuaternionConjugate( const Quaternion &p, Quaternion &q );
void QuaternionInvert( const Quaternion &p, Quaternion &q );
float QuaternionNormalize( Quaternion &q );
void QuaternionAdd( const Quaternion &p, const Quaternion &q, Quaternion &qt );
void QuaternionMult( const Quaternion &p, const Quaternion &q, Quaternion &qt );
void QuaternionMatrix( const Quaternion &q, matrix3x4_t &matrix );
void QuaternionMatrix( const Quaternion &q, const Vector &pos, matrix3x4_t &matrix );
void QuaternionAngles( const Quaternion &q, QAngle &angles );
void AngleQuaternion( const QAngle& angles, Quaternion &qt );
void QuaternionAngles( const Quaternion &q, RadianEuler &angles );
void AngleQuaternion( RadianEuler const &angles, Quaternion &qt );
void QuaternionAxisAngle( const Quaternion &q, Vector &axis, float &angle );
void AxisAngleQuaternion( const Vector &axis, float angle, Quaternion &q );
void BasisToQuaternion( const Vector &vecForward, const Vector &vecRight, const Vector &vecUp, Quaternion &q );
void MatrixQuaternion( const matrix3x4_t &mat, Quaternion &q );
// A couple methods to find the dot product of a vector with a matrix row or column...
inline float MatrixRowDotProduct( const matrix3x4_t &in1, int row, const Vector& in2 )
{
Assert( (row >= 0) && (row < 3) );
return DotProduct( in1[row], in2.Base() );
}
inline float MatrixColumnDotProduct( const matrix3x4_t &in1, int col, const Vector& in2 )
{
Assert( (col >= 0) && (col < 4) );
return in1[0][col] * in2[0] + in1[1][col] * in2[1] + in1[2][col] * in2[2];
}
int __cdecl BoxOnPlaneSide (const float *emins, const float *emaxs, const cplane_t *plane);
inline float anglemod(float a)
{
a = (360.f/65536) * ((int)(a*(65536.f/360.0f)) & 65535);
return a;
}
// Remap a value in the range [A,B] to [C,D].
inline float RemapVal( float val, float A, float B, float C, float D)
{
if ( A == B )
return val >= B ? D : C;
return C + (D - C) * (val - A) / (B - A);
}
inline float RemapValClamped( float val, float A, float B, float C, float D)
{
if ( A == B )
return val >= B ? D : C;
float cVal = (val - A) / (B - A);
cVal = clamp( cVal, 0.0f, 1.0f );
return C + (D - C) * cVal;
}
// Returns A + (B-A)*flPercent.
// float Lerp( float flPercent, float A, float B );
template <class T>
FORCEINLINE T Lerp( float flPercent, T const &A, T const &B )
{
return A + (B - A) * flPercent;
}
FORCEINLINE float Sqr( float f )
{
return f*f;
}
// 5-argument floating point linear interpolation.
// FLerp(f1,f2,i1,i2,x)=
// f1 at x=i1
// f2 at x=i2
// smooth lerp between f1 and f2 at x>i1 and x<i2
// extrapolation for x<i1 or x>i2
//
// If you know a function f(x)'s value (f1) at position i1, and its value (f2) at position i2,
// the function can be linearly interpolated with FLerp(f1,f2,i1,i2,x)
// i2=i1 will cause a divide by zero.
static inline float FLerp(float f1, float f2, float i1, float i2, float x)
{
return f1+(f2-f1)*(x-i1)/(i2-i1);
}
#ifndef VECTOR_NO_SLOW_OPERATIONS
// YWB: Specialization for interpolating euler angles via quaternions...
template<> FORCEINLINE QAngle Lerp<QAngle>( float flPercent, const QAngle& q1, const QAngle& q2 )
{
// Avoid precision errors
if ( q1 == q2 )
return q1;
Quaternion src, dest;
// Convert to quaternions
AngleQuaternion( q1, src );
AngleQuaternion( q2, dest );
Quaternion result;
// Slerp
QuaternionSlerp( src, dest, flPercent, result );
// Convert to euler
QAngle output;
QuaternionAngles( result, output );
return output;
}
#else
#pragma error
// NOTE NOTE: I haven't tested this!! It may not work! Check out interpolatedvar.cpp in the client dll to try it
template<> FORCEINLINE QAngleByValue Lerp<QAngleByValue>( float flPercent, const QAngleByValue& q1, const QAngleByValue& q2 )
{
// Avoid precision errors
if ( q1 == q2 )
return q1;
Quaternion src, dest;
// Convert to quaternions
AngleQuaternion( q1, src );
AngleQuaternion( q2, dest );
Quaternion result;
// Slerp
QuaternionSlerp( src, dest, flPercent, result );
// Convert to euler
QAngleByValue output;
QuaternionAngles( result, output );
return output;
}
#endif // VECTOR_NO_SLOW_OPERATIONS
/// Same as swap(), but won't cause problems with std::swap
template <class T>
FORCEINLINE void V_swap( T& x, T& y )
{
T temp = x;
x = y;
y = temp;
}
template <class T> FORCEINLINE T AVG(T a, T b)
{
return (a+b)/2;
}
// number of elements in an array of static size
#define NELEMS(x) ARRAYSIZE(x)
// XYZ macro, for printf type functions - ex printf("%f %f %f",XYZ(myvector));
#define XYZ(v) (v).x,(v).y,(v).z
inline float Sign( float x )
{
return (x <0.0f) ? -1.0f : 1.0f;
}
//
// Clamps the input integer to the given array bounds.
// Equivalent to the following, but without using any branches:
//
// if( n < 0 ) return 0;
// else if ( n > maxindex ) return maxindex;
// else return n;
//
// This is not always a clear performance win, but when you have situations where a clamped
// value is thrashing against a boundary this is a big win. (ie, valid, invalid, valid, invalid, ...)
//
// Note: This code has been run against all possible integers.
//
inline int ClampArrayBounds( int n, unsigned maxindex )
{
// mask is 0 if less than 4096, 0xFFFFFFFF if greater than
unsigned int inrangemask = 0xFFFFFFFF + (((unsigned) n) > maxindex );
unsigned int lessthan0mask = 0xFFFFFFFF + ( n >= 0 );
// If the result was valid, set the result, (otherwise sets zero)
int result = (inrangemask & n);
// if the result was out of range or zero.
result |= ((~inrangemask) & (~lessthan0mask)) & maxindex;
return result;
}
#define BOX_ON_PLANE_SIDE(emins, emaxs, p) \
(((p)->type < 3)? \
( \
((p)->dist <= (emins)[(p)->type])? \
1 \
: \
( \
((p)->dist >= (emaxs)[(p)->type])?\
2 \
: \
3 \
) \
) \
: \
BoxOnPlaneSide( (emins), (emaxs), (p)))
//-----------------------------------------------------------------------------
// FIXME: Vector versions.... the float versions will go away hopefully soon!
//-----------------------------------------------------------------------------
void AngleVectors (const QAngle& angles, Vector *forward);
void AngleVectors (const QAngle& angles, Vector *forward, Vector *right, Vector *up);
void AngleVectorsTranspose (const QAngle& angles, Vector *forward, Vector *right, Vector *up);
void AngleMatrix (const QAngle &angles, matrix3x4_t &mat );
void AngleMatrix( const QAngle &angles, const Vector &position, matrix3x4_t &mat );
void AngleMatrix (const RadianEuler &angles, matrix3x4_t &mat );
void AngleMatrix( RadianEuler const &angles, const Vector &position, matrix3x4_t &mat );
void AngleIMatrix (const QAngle &angles, matrix3x4_t &mat );
void AngleIMatrix (const QAngle &angles, const Vector &position, matrix3x4_t &mat );
void AngleIMatrix (const RadianEuler &angles, matrix3x4_t &mat );
void VectorAngles( const Vector &forward, QAngle &angles );
void VectorAngles( const Vector &forward, const Vector &pseudoup, QAngle &angles );
void VectorMatrix( const Vector &forward, matrix3x4_t &mat );
void VectorVectors( const Vector &forward, Vector &right, Vector &up );
void SetIdentityMatrix( matrix3x4_t &mat );
void SetScaleMatrix( float x, float y, float z, matrix3x4_t &dst );
void MatrixBuildRotationAboutAxis( const Vector &vAxisOfRot, float angleDegrees, matrix3x4_t &dst );
inline void SetScaleMatrix( float flScale, matrix3x4_t &dst )
{
SetScaleMatrix( flScale, flScale, flScale, dst );
}
inline void SetScaleMatrix( const Vector& scale, matrix3x4_t &dst )
{
SetScaleMatrix( scale.x, scale.y, scale.z, dst );
}
// Computes the inverse transpose
void MatrixTranspose( matrix3x4_t& mat );
void MatrixTranspose( const matrix3x4_t& src, matrix3x4_t& dst );
void MatrixInverseTranspose( const matrix3x4_t& src, matrix3x4_t& dst );
inline void PositionMatrix( const Vector &position, matrix3x4_t &mat )
{
MatrixSetColumn( position, 3, mat );
}
inline void MatrixPosition( const matrix3x4_t &matrix, Vector &position )
{
MatrixGetColumn( matrix, 3, position );
}
inline void VectorRotate( const Vector& in1, const matrix3x4_t &in2, Vector &out)
{
VectorRotate( &in1.x, in2, &out.x );
}
inline void VectorIRotate( const Vector& in1, const matrix3x4_t &in2, Vector &out)
{
VectorIRotate( &in1.x, in2, &out.x );
}
inline void MatrixAngles( const matrix3x4_t &matrix, QAngle &angles )
{
MatrixAngles( matrix, &angles.x );
}
inline void MatrixAngles( const matrix3x4_t &matrix, QAngle &angles, Vector &position )
{
MatrixAngles( matrix, angles );
MatrixPosition( matrix, position );
}
inline void MatrixAngles( const matrix3x4_t &matrix, RadianEuler &angles )
{
MatrixAngles( matrix, &angles.x );
angles.Init( DEG2RAD( angles.z ), DEG2RAD( angles.x ), DEG2RAD( angles.y ) );
}
void MatrixAngles( const matrix3x4_t &mat, RadianEuler &angles, Vector &position );
void MatrixAngles( const matrix3x4_t &mat, Quaternion &q, Vector &position );
inline int VectorCompare (const Vector& v1, const Vector& v2)
{
return v1 == v2;
}
inline void VectorTransform (const Vector& in1, const matrix3x4_t &in2, Vector &out)
{
VectorTransform( &in1.x, in2, &out.x );
}
inline void VectorITransform (const Vector& in1, const matrix3x4_t &in2, Vector &out)
{
VectorITransform( &in1.x, in2, &out.x );
}
/*
inline void DecomposeRotation( const matrix3x4_t &mat, Vector &out )
{
DecomposeRotation( mat, &out.x );
}
*/
inline int BoxOnPlaneSide (const Vector& emins, const Vector& emaxs, const cplane_t *plane )
{
return BoxOnPlaneSide( &emins.x, &emaxs.x, plane );
}
inline void VectorFill(Vector& a, float b)
{
a[0]=a[1]=a[2]=b;
}
inline void VectorNegate(Vector& a)
{
a[0] = -a[0];
a[1] = -a[1];
a[2] = -a[2];
}
inline vec_t VectorAvg(Vector& a)
{
return ( a[0] + a[1] + a[2] ) / 3;
}
//-----------------------------------------------------------------------------
// Box/plane test (slow version)
//-----------------------------------------------------------------------------
inline int FASTCALL BoxOnPlaneSide2 (const Vector& emins, const Vector& emaxs, const cplane_t *p, float tolerance = 0.f )
{
Vector corners[2];
if (p->normal[0] < 0)
{
corners[0][0] = emins[0];
corners[1][0] = emaxs[0];
}
else
{
corners[1][0] = emins[0];
corners[0][0] = emaxs[0];
}
if (p->normal[1] < 0)
{
corners[0][1] = emins[1];
corners[1][1] = emaxs[1];
}
else
{
corners[1][1] = emins[1];
corners[0][1] = emaxs[1];
}
if (p->normal[2] < 0)
{
corners[0][2] = emins[2];
corners[1][2] = emaxs[2];
}
else
{
corners[1][2] = emins[2];
corners[0][2] = emaxs[2];
}
int sides = 0;
float dist1 = DotProduct (p->normal, corners[0]) - p->dist;
if (dist1 >= tolerance)
sides = 1;
float dist2 = DotProduct (p->normal, corners[1]) - p->dist;
if (dist2 < -tolerance)
sides |= 2;
return sides;
}
//-----------------------------------------------------------------------------
// Helpers for bounding box construction
//-----------------------------------------------------------------------------
void ClearBounds (Vector& mins, Vector& maxs);
void AddPointToBounds (const Vector& v, Vector& mins, Vector& maxs);
//
// COLORSPACE/GAMMA CONVERSION STUFF
//
void BuildGammaTable( float gamma, float texGamma, float brightness, int overbright );
// convert texture to linear 0..1 value
inline float TexLightToLinear( int c, int exponent )
{
extern float power2_n[256];
Assert( exponent >= -128 && exponent <= 127 );
return ( float )c * power2_n[exponent+128];
}
// convert texture to linear 0..1 value
int LinearToTexture( float f );
// converts 0..1 linear value to screen gamma (0..255)
int LinearToScreenGamma( float f );
float TextureToLinear( int c );
// compressed color format
struct ColorRGBExp32
{
byte r, g, b;
signed char exponent;
};
void ColorRGBExp32ToVector( const ColorRGBExp32& in, Vector& out );
void VectorToColorRGBExp32( const Vector& v, ColorRGBExp32 &c );
// solve for "x" where "a x^2 + b x + c = 0", return true if solution exists
bool SolveQuadratic( float a, float b, float c, float &root1, float &root2 );
// solves for "a, b, c" where "a x^2 + b x + c = y", return true if solution exists
bool SolveInverseQuadratic( float x1, float y1, float x2, float y2, float x3, float y3, float &a, float &b, float &c );
// solves for a,b,c specified as above, except that it always creates a monotonically increasing or
// decreasing curve if the data is monotonically increasing or decreasing. In order to enforce the
// monoticity condition, it is possible that the resulting quadratic will only approximate the data
// instead of interpolating it. This code is not especially fast.
bool SolveInverseQuadraticMonotonic( float x1, float y1, float x2, float y2,
float x3, float y3, float &a, float &b, float &c );
// solves for "a, b, c" where "1/(a x^2 + b x + c ) = y", return true if solution exists
bool SolveInverseReciprocalQuadratic( float x1, float y1, float x2, float y2, float x3, float y3, float &a, float &b, float &c );
// rotate a vector around the Z axis (YAW)
void VectorYawRotate( const Vector& in, float flYaw, Vector &out);
// Bias takes an X value between 0 and 1 and returns another value between 0 and 1
// The curve is biased towards 0 or 1 based on biasAmt, which is between 0 and 1.
// Lower values of biasAmt bias the curve towards 0 and higher values bias it towards 1.
//
// For example, with biasAmt = 0.2, the curve looks like this:
//
// 1
// | *
// | *
// | *
// | **
// | **
// | ****
// |*********
// |___________________
// 0 1
//
//
// With biasAmt = 0.8, the curve looks like this:
//
// 1
// | **************
// | **
// | *
// | *
// |*
// |*
// |*
// |___________________
// 0 1
//
// With a biasAmt of 0.5, Bias returns X.
float Bias( float x, float biasAmt );
// Gain is similar to Bias, but biasAmt biases towards or away from 0.5.
// Lower bias values bias towards 0.5 and higher bias values bias away from it.
//
// For example, with biasAmt = 0.2, the curve looks like this:
//
// 1
// | *
// | *
// | **
// | ***************
// | **
// | *
// |*
// |___________________
// 0 1
//
//
// With biasAmt = 0.8, the curve looks like this:
//
// 1
// | *****
// | ***
// | *
// | *
// | *
// | ***
// |*****
// |___________________
// 0 1
float Gain( float x, float biasAmt );
// SmoothCurve maps a 0-1 value into another 0-1 value based on a cosine wave
// where the derivatives of the function at 0 and 1 (and 0.5) are 0. This is useful for
// any fadein/fadeout effect where it should start and end smoothly.
//
// The curve looks like this:
//
// 1
// | **
// | * *
// | * *
// | * *
// | * *
// | ** **
// |*** ***
// |___________________
// 0 1
//
float SmoothCurve( float x );
// This works like SmoothCurve, with two changes:
//
// 1. Instead of the curve peaking at 0.5, it will peak at flPeakPos.
// (So if you specify flPeakPos=0.2, then the peak will slide to the left).
//
// 2. flPeakSharpness is a 0-1 value controlling the sharpness of the peak.
// Low values blunt the peak and high values sharpen the peak.
float SmoothCurve_Tweak( float x, float flPeakPos=0.5, float flPeakSharpness=0.5 );
//float ExponentialDecay( float halflife, float dt );
//float ExponentialDecay( float decayTo, float decayTime, float dt );
// halflife is time for value to reach 50%
inline float ExponentialDecay( float halflife, float dt )
{
// log(0.5) == -0.69314718055994530941723212145818
return expf( -0.69314718f / halflife * dt);
}
// decayTo is factor the value should decay to in decayTime
inline float ExponentialDecay( float decayTo, float decayTime, float dt )
{
return expf( logf( decayTo ) / decayTime * dt);
}
// Get the integrated distanced traveled
// decayTo is factor the value should decay to in decayTime
// dt is the time relative to the last velocity update
inline float ExponentialDecayIntegral( float decayTo, float decayTime, float dt )
{
return (powf( decayTo, dt / decayTime) * decayTime - decayTime) / logf( decayTo );
}
// hermite basis function for smooth interpolation
// Similar to Gain() above, but very cheap to call
// value should be between 0 & 1 inclusive
inline float SimpleSpline( float value )
{
float valueSquared = value * value;
// Nice little ease-in, ease-out spline-like curve
return (3 * valueSquared - 2 * valueSquared * value);
}
// remaps a value in [startInterval, startInterval+rangeInterval] from linear to
// spline using SimpleSpline
inline float SimpleSplineRemapVal( float val, float A, float B, float C, float D)
{
if ( A == B )
return val >= B ? D : C;
float cVal = (val - A) / (B - A);
return C + (D - C) * SimpleSpline( cVal );
}
// remaps a value in [startInterval, startInterval+rangeInterval] from linear to
// spline using SimpleSpline
inline float SimpleSplineRemapValClamped( float val, float A, float B, float C, float D )
{
if ( A == B )
return val >= B ? D : C;
float cVal = (val - A) / (B - A);
cVal = clamp( cVal, 0.0f, 1.0f );
return C + (D - C) * SimpleSpline( cVal );
}
FORCEINLINE int RoundFloatToInt(float f)
{
#if defined(__i386__) || defined(_M_IX86) || defined( PLATFORM_WINDOWS_PC64 ) || defined(__x86_64__)
return _mm_cvtss_si32(_mm_load_ss(&f));
#elif defined( _X360 )
#ifdef Assert
Assert( IsFPUControlWordSet() );
#endif
union
{
double flResult;
int pResult[2];
};
flResult = __fctiw( f );
return pResult[1];
#elif defined (__arm__)
return (int)(f + 0.5f);
#else
#error Unknown architecture
#endif
}
FORCEINLINE unsigned char RoundFloatToByte(float f)
{
int nResult = RoundFloatToInt(f);
#ifdef Assert
Assert( (nResult & ~0xFF) == 0 );
#endif
return (unsigned char) nResult;
}
FORCEINLINE unsigned long RoundFloatToUnsignedLong(float f)
{
#if defined( _X360 )
#ifdef Assert
Assert( IsFPUControlWordSet() );
#endif
union
{
double flResult;
int pIntResult[2];
unsigned long pResult[2];
};
flResult = __fctiw( f );
Assert( pIntResult[1] >= 0 );
return pResult[1];
#else // !X360
#ifdef __arm__
return (unsigned long)(f + 0.5f);
#elif defined( PLATFORM_WINDOWS_PC64 )
uint nRet = ( uint ) f;
if ( nRet & 1 )
{
if ( ( f - floor( f ) >= 0.5 ) )
{
nRet++;
}
}
else
{
if ( ( f - floor( f ) > 0.5 ) )
{
nRet++;
}
}
return nRet;
#else // PLATFORM_WINDOWS_PC64
unsigned char nResult[8];
#if defined( _WIN32 )
__asm
{
fld f
fistp qword ptr nResult
}
#elif POSIX
__asm __volatile__ (
"fistpl %0;": "=m" (nResult): "t" (f) : "st"
);
#endif
return *((unsigned long*)nResult);
#endif // PLATFORM_WINDOWS_PC64
#endif // !X360
}
FORCEINLINE bool IsIntegralValue( float flValue, float flTolerance = 0.001f )
{
return fabs( RoundFloatToInt( flValue ) - flValue ) < flTolerance;
}
// Fast, accurate ftol:
FORCEINLINE int Float2Int( float a )
{
#if defined( _X360 )
union
{
double flResult;
int pResult[2];
};
flResult = __fctiwz( a );
return pResult[1];
#else // !X360
// Rely on compiler to generate CVTTSS2SI on x86
return (int) a;
#endif
}
// Over 15x faster than: (int)floor(value)
inline int Floor2Int( float a )
{
int RetVal;
#if defined( __i386__ )
// Convert to int and back, compare, subtract one if too big
__m128 a128 = _mm_set_ss(a);
RetVal = _mm_cvtss_si32(a128);
__m128 rounded128 = _mm_cvt_si2ss(_mm_setzero_ps(), RetVal);
RetVal -= _mm_comigt_ss( rounded128, a128 );
#else
RetVal = static_cast<int>( floor(a) );
#endif
return RetVal;
}
//-----------------------------------------------------------------------------
// Fast color conversion from float to unsigned char
//-----------------------------------------------------------------------------
FORCEINLINE unsigned int FastFToC( float c )
{
#if defined( __i386__ )
// IEEE float bit manipulation works for values between [0, 1<<23)
union { float f; int i; } convert = { c*255.0f + (float)(1<<23) };
return convert.i & 255;
#else
// consoles CPUs suffer from load-hit-store penalty
return Float2Int( c * 255.0f );
#endif
}
//-----------------------------------------------------------------------------
// Fast conversion from float to integer with magnitude less than 2**22
//-----------------------------------------------------------------------------
FORCEINLINE int FastFloatToSmallInt( float c )
{
#if defined( __i386__ )
// IEEE float bit manipulation works for values between [-1<<22, 1<<22)
union { float f; int i; } convert = { c + (float)(3<<22) };
return (convert.i & ((1<<23)-1)) - (1<<22);
#else
// consoles CPUs suffer from load-hit-store penalty
return Float2Int( c );
#endif
}
//-----------------------------------------------------------------------------
// Purpose: Bound input float to .001 (millisecond) boundary
// Input : in -
// Output : inline float
//-----------------------------------------------------------------------------
inline float ClampToMsec( float in )
{
int msec = Floor2Int( in * 1000.0f + 0.5f );
return 0.001f * msec;
}
// Over 15x faster than: (int)ceil(value)
inline int Ceil2Int( float a )
{
int RetVal;
#if defined( __i386__ )
// Convert to int and back, compare, add one if too small
__m128 a128 = _mm_load_ss(&a);
RetVal = _mm_cvtss_si32(a128);
__m128 rounded128 = _mm_cvt_si2ss(_mm_setzero_ps(), RetVal);
RetVal += _mm_comilt_ss( rounded128, a128 );
#else
RetVal = static_cast<int>( ceil(a) );
#endif
return RetVal;
}
// Regular signed area of triangle
#define TriArea2D( A, B, C ) \
( 0.5f * ( ( B.x - A.x ) * ( C.y - A.y ) - ( B.y - A.y ) * ( C.x - A.x ) ) )
// This version doesn't premultiply by 0.5f, so it's the area of the rectangle instead
#define TriArea2DTimesTwo( A, B, C ) \
( ( ( B.x - A.x ) * ( C.y - A.y ) - ( B.y - A.y ) * ( C.x - A.x ) ) )
// Get the barycentric coordinates of "pt" in triangle [A,B,C].
inline void GetBarycentricCoords2D(
Vector2D const &A,
Vector2D const &B,
Vector2D const &C,
Vector2D const &pt,
float bcCoords[3] )
{
// Note, because to top and bottom are both x2, the issue washes out in the composite
float invTriArea = 1.0f / TriArea2DTimesTwo( A, B, C );
// NOTE: We assume here that the lightmap coordinate vertices go counterclockwise.
// If not, TriArea2D() is negated so this works out right.
bcCoords[0] = TriArea2DTimesTwo( B, C, pt ) * invTriArea;
bcCoords[1] = TriArea2DTimesTwo( C, A, pt ) * invTriArea;
bcCoords[2] = TriArea2DTimesTwo( A, B, pt ) * invTriArea;
}
// Return true of the sphere might touch the box (the sphere is actually treated
// like a box itself, so this may return true if the sphere's bounding box touches
// a corner of the box but the sphere itself doesn't).
inline bool QuickBoxSphereTest(
const Vector& vOrigin,
float flRadius,
const Vector& bbMin,
const Vector& bbMax )
{
return vOrigin.x - flRadius < bbMax.x && vOrigin.x + flRadius > bbMin.x &&
vOrigin.y - flRadius < bbMax.y && vOrigin.y + flRadius > bbMin.y &&
vOrigin.z - flRadius < bbMax.z && vOrigin.z + flRadius > bbMin.z;
}
// Return true of the boxes intersect (but not if they just touch).
inline bool QuickBoxIntersectTest(
const Vector& vBox1Min,
const Vector& vBox1Max,
const Vector& vBox2Min,
const Vector& vBox2Max )
{
return
vBox1Min.x < vBox2Max.x && vBox1Max.x > vBox2Min.x &&
vBox1Min.y < vBox2Max.y && vBox1Max.y > vBox2Min.y &&
vBox1Min.z < vBox2Max.z && vBox1Max.z > vBox2Min.z;
}
extern float GammaToLinearFullRange( float gamma );
extern float LinearToGammaFullRange( float linear );
extern float GammaToLinear( float gamma );
extern float LinearToGamma( float linear );
extern float SrgbGammaToLinear( float flSrgbGammaValue );
extern float SrgbLinearToGamma( float flLinearValue );
extern float X360GammaToLinear( float fl360GammaValue );
extern float X360LinearToGamma( float flLinearValue );
extern float SrgbGammaTo360Gamma( float flSrgbGammaValue );
// linear (0..4) to screen corrected vertex space (0..1?)
FORCEINLINE float LinearToVertexLight( float f )
{
extern float lineartovertex[4096];
// Gotta clamp before the multiply; could overflow...
// assume 0..4 range
int i = RoundFloatToInt( f * 1024.f );
// Presumably the comman case will be not to clamp, so check that first:
if( (unsigned)i > 4095 )
{
if ( i < 0 )
i = 0; // Compare to zero instead of 4095 to save 4 bytes in the instruction stream
else
i = 4095;
}
return lineartovertex[i];
}
FORCEINLINE unsigned char LinearToLightmap( float f )
{
extern unsigned char lineartolightmap[4096];
// Gotta clamp before the multiply; could overflow...
int i = RoundFloatToInt( f * 1024.f ); // assume 0..4 range
// Presumably the comman case will be not to clamp, so check that first:
if ( (unsigned)i > 4095 )
{
if ( i < 0 )
i = 0; // Compare to zero instead of 4095 to save 4 bytes in the instruction stream
else
i = 4095;
}
return lineartolightmap[i];
}
FORCEINLINE void ColorClamp( Vector& color )
{
float maxc = max( color.x, max( color.y, color.z ) );
if ( maxc > 1.0f )
{
float ooMax = 1.0f / maxc;
color.x *= ooMax;
color.y *= ooMax;
color.z *= ooMax;
}
if ( color[0] < 0.f ) color[0] = 0.f;
if ( color[1] < 0.f ) color[1] = 0.f;
if ( color[2] < 0.f ) color[2] = 0.f;
}
inline void ColorClampTruncate( Vector& color )
{
if (color[0] > 1.0f) color[0] = 1.0f; else if (color[0] < 0.0f) color[0] = 0.0f;
if (color[1] > 1.0f) color[1] = 1.0f; else if (color[1] < 0.0f) color[1] = 0.0f;
if (color[2] > 1.0f) color[2] = 1.0f; else if (color[2] < 0.0f) color[2] = 0.0f;
}
// Interpolate a Catmull-Rom spline.
// t is a [0,1] value and interpolates a curve between p2 and p3.
void Catmull_Rom_Spline(
const Vector &p1,
const Vector &p2,
const Vector &p3,
const Vector &p4,
float t,
Vector &output );
// Interpolate a Catmull-Rom spline.
// Returns the tangent of the point at t of the spline
void Catmull_Rom_Spline_Tangent(
const Vector &p1,
const Vector &p2,
const Vector &p3,
const Vector &p4,
float t,
Vector &output );
// area under the curve [0..t]
void Catmull_Rom_Spline_Integral(
const Vector &p1,
const Vector &p2,
const Vector &p3,
const Vector &p4,
float t,
Vector& output );
// area under the curve [0..1]
void Catmull_Rom_Spline_Integral(
const Vector &p1,
const Vector &p2,
const Vector &p3,
const Vector &p4,
Vector& output );
// Interpolate a Catmull-Rom spline.
// Normalize p2->p1 and p3->p4 to be the same length as p2->p3
void Catmull_Rom_Spline_Normalize(
const Vector &p1,
const Vector &p2,
const Vector &p3,
const Vector &p4,
float t,
Vector &output );
// area under the curve [0..t]
// Normalize p2->p1 and p3->p4 to be the same length as p2->p3
void Catmull_Rom_Spline_Integral_Normalize(
const Vector &p1,
const Vector &p2,
const Vector &p3,
const Vector &p4,
float t,
Vector& output );
// Interpolate a Catmull-Rom spline.
// Normalize p2.x->p1.x and p3.x->p4.x to be the same length as p2.x->p3.x
void Catmull_Rom_Spline_NormalizeX(
const Vector &p1,
const Vector &p2,
const Vector &p3,
const Vector &p4,
float t,
Vector &output );
// area under the curve [0..t]
void Catmull_Rom_Spline_NormalizeX(
const Vector &p1,
const Vector &p2,
const Vector &p3,
const Vector &p4,
float t,
Vector& output );
// Interpolate a Hermite spline.
// t is a [0,1] value and interpolates a curve between p1 and p2 with the deltas d1 and d2.
void Hermite_Spline(
const Vector &p1,
const Vector &p2,
const Vector &d1,
const Vector &d2,
float t,
Vector& output );
float Hermite_Spline(
float p1,
float p2,
float d1,
float d2,
float t );
// t is a [0,1] value and interpolates a curve between p1 and p2 with the slopes p0->p1 and p1->p2
void Hermite_Spline(
const Vector &p0,
const Vector &p1,
const Vector &p2,
float t,
Vector& output );
float Hermite_Spline(
float p0,
float p1,
float p2,
float t );
void Hermite_SplineBasis( float t, float basis[] );
void Hermite_Spline(
const Quaternion &q0,
const Quaternion &q1,
const Quaternion &q2,
float t,
Quaternion &output );
// See http://en.wikipedia.org/wiki/Kochanek-Bartels_curves
//
// Tension: -1 = Round -> 1 = Tight
// Bias: -1 = Pre-shoot (bias left) -> 1 = Post-shoot (bias right)
// Continuity: -1 = Box corners -> 1 = Inverted corners
//
// If T=B=C=0 it's the same matrix as Catmull-Rom.
// If T=1 & B=C=0 it's the same as Cubic.
// If T=B=0 & C=-1 it's just linear interpolation
//
// See http://news.povray.org/povray.binaries.tutorials/attachment/%3CXns91B880592482seed7@povray.org%3E/Splines.bas.txt
// for example code and descriptions of various spline types...
//
void Kochanek_Bartels_Spline(
float tension,
float bias,
float continuity,
const Vector &p1,
const Vector &p2,
const Vector &p3,
const Vector &p4,
float t,
Vector& output );
void Kochanek_Bartels_Spline_NormalizeX(
float tension,
float bias,
float continuity,
const Vector &p1,
const Vector &p2,
const Vector &p3,
const Vector &p4,
float t,
Vector& output );
// See link at Kochanek_Bartels_Spline for info on the basis matrix used
void Cubic_Spline(
const Vector &p1,
const Vector &p2,
const Vector &p3,
const Vector &p4,
float t,
Vector& output );
void Cubic_Spline_NormalizeX(
const Vector &p1,
const Vector &p2,
const Vector &p3,
const Vector &p4,
float t,
Vector& output );
// See link at Kochanek_Bartels_Spline for info on the basis matrix used
void BSpline(
const Vector &p1,
const Vector &p2,
const Vector &p3,
const Vector &p4,
float t,
Vector& output );
void BSpline_NormalizeX(
const Vector &p1,
const Vector &p2,
const Vector &p3,
const Vector &p4,
float t,
Vector& output );
// See link at Kochanek_Bartels_Spline for info on the basis matrix used
void Parabolic_Spline(
const Vector &p1,
const Vector &p2,
const Vector &p3,
const Vector &p4,
float t,
Vector& output );
void Parabolic_Spline_NormalizeX(
const Vector &p1,
const Vector &p2,
const Vector &p3,
const Vector &p4,
float t,
Vector& output );
// quintic interpolating polynomial from Perlin.
// 0->0, 1->1, smooth-in between with smooth tangents
FORCEINLINE float QuinticInterpolatingPolynomial(float t)
{
// 6t^5-15t^4+10t^3
return t * t * t *( t * ( t* 6.0 - 15.0 ) + 10.0 );
}
// given a table of sorted tabulated positions, return the two indices and blendfactor to linear
// interpolate. Does a search. Can be used to find the blend value to interpolate between
// keyframes.
void GetInterpolationData( float const *pKnotPositions,
float const *pKnotValues,
int nNumValuesinList,
int nInterpolationRange,
float flPositionToInterpolateAt,
bool bWrap,
float *pValueA,
float *pValueB,
float *pInterpolationValue);
float RangeCompressor( float flValue, float flMin, float flMax, float flBase );
// Get the minimum distance from vOrigin to the bounding box defined by [mins,maxs]
// using voronoi regions.
// 0 is returned if the origin is inside the box.
float CalcSqrDistanceToAABB( const Vector &mins, const Vector &maxs, const Vector &point );
void CalcClosestPointOnAABB( const Vector &mins, const Vector &maxs, const Vector &point, Vector &closestOut );
void CalcSqrDistAndClosestPointOnAABB( const Vector &mins, const Vector &maxs, const Vector &point, Vector &closestOut, float &distSqrOut );
inline float CalcDistanceToAABB( const Vector &mins, const Vector &maxs, const Vector &point )
{
float flDistSqr = CalcSqrDistanceToAABB( mins, maxs, point );
return sqrt(flDistSqr);
}
// Get the closest point from P to the (infinite) line through vLineA and vLineB and
// calculate the shortest distance from P to the line.
// If you pass in a value for t, it will tell you the t for (A + (B-A)t) to get the closest point.
// If the closest point lies on the segment between A and B, then 0 <= t <= 1.
void CalcClosestPointOnLine( const Vector &P, const Vector &vLineA, const Vector &vLineB, Vector &vClosest, float *t=0 );
float CalcDistanceToLine( const Vector &P, const Vector &vLineA, const Vector &vLineB, float *t=0 );
float CalcDistanceSqrToLine( const Vector &P, const Vector &vLineA, const Vector &vLineB, float *t=0 );
// The same three functions as above, except now the line is closed between A and B.
void CalcClosestPointOnLineSegment( const Vector &P, const Vector &vLineA, const Vector &vLineB, Vector &vClosest, float *t=0 );
float CalcDistanceToLineSegment( const Vector &P, const Vector &vLineA, const Vector &vLineB, float *t=0 );
float CalcDistanceSqrToLineSegment( const Vector &P, const Vector &vLineA, const Vector &vLineB, float *t=0 );
// A function to compute the closes line segment connnection two lines (or false if the lines are parallel, etc.)
bool CalcLineToLineIntersectionSegment(
const Vector& p1,const Vector& p2,const Vector& p3,const Vector& p4,Vector *s1,Vector *s2,
float *t1, float *t2 );
// The above functions in 2D
void CalcClosestPointOnLine2D( Vector2D const &P, Vector2D const &vLineA, Vector2D const &vLineB, Vector2D &vClosest, float *t=0 );
float CalcDistanceToLine2D( Vector2D const &P, Vector2D const &vLineA, Vector2D const &vLineB, float *t=0 );
float CalcDistanceSqrToLine2D( Vector2D const &P, Vector2D const &vLineA, Vector2D const &vLineB, float *t=0 );
void CalcClosestPointOnLineSegment2D( Vector2D const &P, Vector2D const &vLineA, Vector2D const &vLineB, Vector2D &vClosest, float *t=0 );
float CalcDistanceToLineSegment2D( Vector2D const &P, Vector2D const &vLineA, Vector2D const &vLineB, float *t=0 );
float CalcDistanceSqrToLineSegment2D( Vector2D const &P, Vector2D const &vLineA, Vector2D const &vLineB, float *t=0 );
// Init the mathlib
void MathLib_Init( float gamma = 2.2f, float texGamma = 2.2f, float brightness = 0.0f, int overbright = 2.0f, bool bAllow3DNow = true, bool bAllowSSE = true, bool bAllowSSE2 = true, bool bAllowMMX = true );
bool MathLib_3DNowEnabled( void );
bool MathLib_MMXEnabled( void );
bool MathLib_SSEEnabled( void );
bool MathLib_SSE2Enabled( void );
float Approach( float target, float value, float speed );
float ApproachAngle( float target, float value, float speed );
float AngleDiff( float destAngle, float srcAngle );
float AngleDistance( float next, float cur );
float AngleNormalize( float angle );
// ensure that 0 <= angle <= 360
float AngleNormalizePositive( float angle );
bool AnglesAreEqual( float a, float b, float tolerance = 0.0f );
void RotationDeltaAxisAngle( const QAngle &srcAngles, const QAngle &destAngles, Vector &deltaAxis, float &deltaAngle );
void RotationDelta( const QAngle &srcAngles, const QAngle &destAngles, QAngle *out );
void ComputeTrianglePlane( const Vector& v1, const Vector& v2, const Vector& v3, Vector& normal, float& intercept );
int PolyFromPlane( Vector *outVerts, const Vector& normal, float dist, float fHalfScale = 9000.0f );
int ClipPolyToPlane( Vector *inVerts, int vertCount, Vector *outVerts, const Vector& normal, float dist, float fOnPlaneEpsilon = 0.1f );
int ClipPolyToPlane_Precise( double *inVerts, int vertCount, double *outVerts, const double *normal, double dist, double fOnPlaneEpsilon = 0.1 );
//-----------------------------------------------------------------------------
// Computes a reasonable tangent space for a triangle
//-----------------------------------------------------------------------------
void CalcTriangleTangentSpace( const Vector &p0, const Vector &p1, const Vector &p2,
const Vector2D &t0, const Vector2D &t1, const Vector2D& t2,
Vector &sVect, Vector &tVect );
//-----------------------------------------------------------------------------
// Transforms a AABB into another space; which will inherently grow the box.
//-----------------------------------------------------------------------------
void TransformAABB( const matrix3x4_t &in1, const Vector &vecMinsIn, const Vector &vecMaxsIn, Vector &vecMinsOut, Vector &vecMaxsOut );
//-----------------------------------------------------------------------------
// Uses the inverse transform of in1
//-----------------------------------------------------------------------------
void ITransformAABB( const matrix3x4_t &in1, const Vector &vecMinsIn, const Vector &vecMaxsIn, Vector &vecMinsOut, Vector &vecMaxsOut );
//-----------------------------------------------------------------------------
// Rotates a AABB into another space; which will inherently grow the box.
// (same as TransformAABB, but doesn't take the translation into account)
//-----------------------------------------------------------------------------
void RotateAABB( const matrix3x4_t &in1, const Vector &vecMinsIn, const Vector &vecMaxsIn, Vector &vecMinsOut, Vector &vecMaxsOut );
//-----------------------------------------------------------------------------
// Uses the inverse transform of in1
//-----------------------------------------------------------------------------
void IRotateAABB( const matrix3x4_t &in1, const Vector &vecMinsIn, const Vector &vecMaxsIn, Vector &vecMinsOut, Vector &vecMaxsOut );
//-----------------------------------------------------------------------------
// Transform a plane
//-----------------------------------------------------------------------------
inline void MatrixTransformPlane( const matrix3x4_t &src, const cplane_t &inPlane, cplane_t &outPlane )
{
// What we want to do is the following:
// 1) transform the normal into the new space.
// 2) Determine a point on the old plane given by plane dist * plane normal
// 3) Transform that point into the new space
// 4) Plane dist = DotProduct( new normal, new point )
// An optimized version, which works if the plane is orthogonal.
// 1) Transform the normal into the new space
// 2) Realize that transforming the old plane point into the new space
// is given by [ d * n'x + Tx, d * n'y + Ty, d * n'z + Tz ]
// where d = old plane dist, n' = transformed normal, Tn = translational component of transform
// 3) Compute the new plane dist using the dot product of the normal result of #2
// For a correct result, this should be an inverse-transpose matrix
// but that only matters if there are nonuniform scale or skew factors in this matrix.
VectorRotate( inPlane.normal, src, outPlane.normal );
outPlane.dist = inPlane.dist * DotProduct( outPlane.normal, outPlane.normal );
outPlane.dist += outPlane.normal.x * src[0][3] + outPlane.normal.y * src[1][3] + outPlane.normal.z * src[2][3];
}
inline void MatrixITransformPlane( const matrix3x4_t &src, const cplane_t &inPlane, cplane_t &outPlane )
{
// The trick here is that Tn = translational component of transform,
// but for an inverse transform, Tn = - R^-1 * T
Vector vecTranslation;
MatrixGetColumn( src, 3, vecTranslation );
Vector vecInvTranslation;
VectorIRotate( vecTranslation, src, vecInvTranslation );
VectorIRotate( inPlane.normal, src, outPlane.normal );
outPlane.dist = inPlane.dist * DotProduct( outPlane.normal, outPlane.normal );
outPlane.dist -= outPlane.normal.x * vecInvTranslation[0] + outPlane.normal.y * vecInvTranslation[1] + outPlane.normal.z * vecInvTranslation[2];
}
int CeilPow2( int in );
int FloorPow2( int in );
FORCEINLINE float * UnpackNormal_HEND3N( const unsigned int *pPackedNormal, float *pNormal )
{
int temp[3];
temp[0] = ((*pPackedNormal >> 0L) & 0x7ff);
if ( temp[0] & 0x400 )
{
temp[0] = 2048 - temp[0];
}
temp[1] = ((*pPackedNormal >> 11L) & 0x7ff);
if ( temp[1] & 0x400 )
{
temp[1] = 2048 - temp[1];
}
temp[2] = ((*pPackedNormal >> 22L) & 0x3ff);
if ( temp[2] & 0x200 )
{
temp[2] = 1024 - temp[2];
}
pNormal[0] = (float)temp[0] * 1.0f/1023.0f;
pNormal[1] = (float)temp[1] * 1.0f/1023.0f;
pNormal[2] = (float)temp[2] * 1.0f/511.0f;
return pNormal;
}
FORCEINLINE unsigned int * PackNormal_HEND3N( const float *pNormal, unsigned int *pPackedNormal )
{
int temp[3];
temp[0] = Float2Int( pNormal[0] * 1023.0f );
temp[1] = Float2Int( pNormal[1] * 1023.0f );
temp[2] = Float2Int( pNormal[2] * 511.0f );
// the normal is out of bounds, determine the source and fix
// clamping would be even more of a slowdown here
Assert( temp[0] >= -1023 && temp[0] <= 1023 );
Assert( temp[1] >= -1023 && temp[1] <= 1023 );
Assert( temp[2] >= -511 && temp[2] <= 511 );
*pPackedNormal = ( ( temp[2] & 0x3ff ) << 22L ) |
( ( temp[1] & 0x7ff ) << 11L ) |
( ( temp[0] & 0x7ff ) << 0L );
return pPackedNormal;
}
FORCEINLINE unsigned int * PackNormal_HEND3N( float nx, float ny, float nz, unsigned int *pPackedNormal )
{
int temp[3];
temp[0] = Float2Int( nx * 1023.0f );
temp[1] = Float2Int( ny * 1023.0f );
temp[2] = Float2Int( nz * 511.0f );
// the normal is out of bounds, determine the source and fix
// clamping would be even more of a slowdown here
Assert( temp[0] >= -1023 && temp[0] <= 1023 );
Assert( temp[1] >= -1023 && temp[1] <= 1023 );
Assert( temp[2] >= -511 && temp[2] <= 511 );
*pPackedNormal = ( ( temp[2] & 0x3ff ) << 22L ) |
( ( temp[1] & 0x7ff ) << 11L ) |
( ( temp[0] & 0x7ff ) << 0L );
return pPackedNormal;
}
FORCEINLINE float * UnpackNormal_SHORT2( const unsigned int *pPackedNormal, float *pNormal, bool bIsTangent = FALSE )
{
// Unpacks from Jason's 2-short format (fills in a 4th binormal-sign (+1/-1) value, if this is a tangent vector)
// FIXME: short math is slow on 360 - use ints here instead (bit-twiddle to deal w/ the sign bits)
short iX = (*pPackedNormal & 0x0000FFFF);
short iY = (*pPackedNormal & 0xFFFF0000) >> 16;
float zSign = +1;
if ( iX < 0 )
{
zSign = -1;
iX = -iX;
}
float tSign = +1;
if ( iY < 0 )
{
tSign = -1;
iY = -iY;
}
pNormal[0] = ( iX - 16384.0f ) / 16384.0f;
pNormal[1] = ( iY - 16384.0f ) / 16384.0f;
pNormal[2] = zSign*sqrtf( 1.0f - ( pNormal[0]*pNormal[0] + pNormal[1]*pNormal[1] ) );
if ( bIsTangent )
{
pNormal[3] = tSign;
}
return pNormal;
}
FORCEINLINE unsigned int * PackNormal_SHORT2( float nx, float ny, float nz, unsigned int *pPackedNormal, float binormalSign = +1.0f )
{
// Pack a vector (ASSUMED TO BE NORMALIZED) into Jason's 4-byte (SHORT2) format.
// This simply reconstructs Z from X & Y. It uses the sign bits of the X & Y coords
// to reconstruct the sign of Z and, if this is a tangent vector, the sign of the
// binormal (this is needed because tangent/binormal vectors are supposed to follow
// UV gradients, but shaders reconstruct the binormal from the tangent and normal
// assuming that they form a right-handed basis).
nx += 1; // [-1,+1] -> [0,2]
ny += 1;
nx *= 16384.0f; // [ 0, 2] -> [0,32768]
ny *= 16384.0f;
// '0' and '32768' values are invalid encodings
nx = max( nx, 1.0f ); // Make sure there are no zero values
ny = max( ny, 1.0f );
nx = min( nx, 32767.0f ); // Make sure there are no 32768 values
ny = min( ny, 32767.0f );
if ( nz < 0.0f )
nx = -nx; // Set the sign bit for z
ny *= binormalSign; // Set the sign bit for the binormal (use when encoding a tangent vector)
// FIXME: short math is slow on 360 - use ints here instead (bit-twiddle to deal w/ the sign bits), also use Float2Int()
short sX = (short)nx; // signed short [1,32767]
short sY = (short)ny;
*pPackedNormal = ( sX & 0x0000FFFF ) | ( sY << 16 ); // NOTE: The mask is necessary (if sX is negative and cast to an int...)
return pPackedNormal;
}
FORCEINLINE unsigned int * PackNormal_SHORT2( const float *pNormal, unsigned int *pPackedNormal, float binormalSign = +1.0f )
{
return PackNormal_SHORT2( pNormal[0], pNormal[1], pNormal[2], pPackedNormal, binormalSign );
}
// Unpacks a UBYTE4 normal (for a tangent, the result's fourth component receives the binormal 'sign')
FORCEINLINE float * UnpackNormal_UBYTE4( const unsigned int *pPackedNormal, float *pNormal, bool bIsTangent = FALSE )
{
unsigned char cX, cY;
if ( bIsTangent )
{
cX = *pPackedNormal >> 16; // Unpack Z
cY = *pPackedNormal >> 24; // Unpack W
}
else
{
cX = *pPackedNormal >> 0; // Unpack X
cY = *pPackedNormal >> 8; // Unpack Y
}
float x = cX - 128.0f;
float y = cY - 128.0f;
float z;
float zSignBit = x < 0 ? 1.0f : 0.0f; // z and t negative bits (like slt asm instruction)
float tSignBit = y < 0 ? 1.0f : 0.0f;
float zSign = -( 2*zSignBit - 1 ); // z and t signs
float tSign = -( 2*tSignBit - 1 );
x = x*zSign - zSignBit; // 0..127
y = y*tSign - tSignBit;
x = x - 64; // -64..63
y = y - 64;
float xSignBit = x < 0 ? 1.0f : 0.0f; // x and y negative bits (like slt asm instruction)
float ySignBit = y < 0 ? 1.0f : 0.0f;
float xSign = -( 2*xSignBit - 1 ); // x and y signs
float ySign = -( 2*ySignBit - 1 );
x = ( x*xSign - xSignBit ) / 63.0f; // 0..1 range
y = ( y*ySign - ySignBit ) / 63.0f;
z = 1.0f - x - y;
float oolen = 1.0f / sqrt( x*x + y*y + z*z ); // Normalize and
x *= oolen * xSign; // Recover signs
y *= oolen * ySign;
z *= oolen * zSign;
pNormal[0] = x;
pNormal[1] = y;
pNormal[2] = z;
if ( bIsTangent )
{
pNormal[3] = tSign;
}
return pNormal;
}
//////////////////////////////////////////////////////////////////////////////
// See: http://www.oroboro.com/rafael/docserv.php/index/programming/article/unitv2
//
// UBYTE4 encoding, using per-octant projection onto x+y+z=1
// Assume input vector is already unit length
//
// binormalSign specifies 'sign' of binormal, stored in t sign bit of tangent
// (lets the shader know whether norm/tan/bin form a right-handed basis)
//
// bIsTangent is used to specify which WORD of the output to store the data
// The expected usage is to call once with the normal and once with
// the tangent and binormal sign flag, bitwise OR'ing the returned DWORDs
FORCEINLINE unsigned int * PackNormal_UBYTE4( float nx, float ny, float nz, unsigned int *pPackedNormal, bool bIsTangent = false, float binormalSign = +1.0f )
{
float xSign = nx < 0.0f ? -1.0f : 1.0f; // -1 or 1 sign
float ySign = ny < 0.0f ? -1.0f : 1.0f;
float zSign = nz < 0.0f ? -1.0f : 1.0f;
float tSign = binormalSign;
Assert( ( binormalSign == +1.0f ) || ( binormalSign == -1.0f ) );
float xSignBit = 0.5f*( 1 - xSign ); // [-1,+1] -> [1,0]
float ySignBit = 0.5f*( 1 - ySign ); // 1 is negative bit (like slt instruction)
float zSignBit = 0.5f*( 1 - zSign );
float tSignBit = 0.5f*( 1 - binormalSign );
float absX = xSign*nx; // 0..1 range (abs)
float absY = ySign*ny;
float absZ = zSign*nz;
float xbits = absX / ( absX + absY + absZ ); // Project onto x+y+z=1 plane
float ybits = absY / ( absX + absY + absZ );
xbits *= 63; // 0..63
ybits *= 63;
xbits = xbits * xSign - xSignBit; // -64..63 range
ybits = ybits * ySign - ySignBit;
xbits += 64.0f; // 0..127 range
ybits += 64.0f;
xbits = xbits * zSign - zSignBit; // Negate based on z and t
ybits = ybits * tSign - tSignBit; // -128..127 range
xbits += 128.0f; // 0..255 range
ybits += 128.0f;
unsigned char cX = (unsigned char) xbits;
unsigned char cY = (unsigned char) ybits;
if ( !bIsTangent )
*pPackedNormal = (cX << 0) | (cY << 8); // xy for normal
else
*pPackedNormal = (cX << 16) | (cY << 24); // zw for tangent
return pPackedNormal;
}
FORCEINLINE unsigned int * PackNormal_UBYTE4( const float *pNormal, unsigned int *pPackedNormal, bool bIsTangent = false, float binormalSign = +1.0f )
{
return PackNormal_UBYTE4( pNormal[0], pNormal[1], pNormal[2], pPackedNormal, bIsTangent, binormalSign );
}
//-----------------------------------------------------------------------------
// Convert RGB to HSV
//-----------------------------------------------------------------------------
void RGBtoHSV( const Vector &rgb, Vector &hsv );
//-----------------------------------------------------------------------------
// Convert HSV to RGB
//-----------------------------------------------------------------------------
void HSVtoRGB( const Vector &hsv, Vector &rgb );
//-----------------------------------------------------------------------------
// Fast version of pow and log
//-----------------------------------------------------------------------------
float FastLog2(float i); // log2( i )
float FastPow2(float i); // 2^i
float FastPow(float a, float b); // a^b
float FastPow10( float i ); // 10^i
//-----------------------------------------------------------------------------
// For testing float equality
//-----------------------------------------------------------------------------
inline bool CloseEnough( float a, float b, float epsilon = EQUAL_EPSILON )
{
return fabs( a - b ) <= epsilon;
}
inline bool CloseEnough( const Vector &a, const Vector &b, float epsilon = EQUAL_EPSILON )
{
return fabs( a.x - b.x ) <= epsilon &&
fabs( a.y - b.y ) <= epsilon &&
fabs( a.z - b.z ) <= epsilon;
}
// Fast compare
// maxUlps is the maximum error in terms of Units in the Last Place. This
// specifies how big an error we are willing to accept in terms of the value
// of the least significant digit of the floating point number<EFBFBD>s
// representation. maxUlps can also be interpreted in terms of how many
// representable floats we are willing to accept between A and B.
// This function will allow maxUlps-1 floats between A and B.
bool AlmostEqual(float a, float b, int maxUlps = 10);
inline bool AlmostEqual( const Vector &a, const Vector &b, int maxUlps = 10)
{
return AlmostEqual( a.x, b.x, maxUlps ) &&
AlmostEqual( a.y, b.y, maxUlps ) &&
AlmostEqual( a.z, b.z, maxUlps );
}
#endif // MATH_BASE_H