d4708
/
source-engine
mirror of https://github.com/nillerusr/source-engine.git
1
0
Fork 0
Code Issues Projects Releases Wiki Activity
Modified source engine (2017) developed by valve and leaked in 2020. Not for commercial purporses
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
383 Commits
25 Branches
6 Tags
221 MiB
 
 
 
 
 
 
Tree: 8c0f758a57
Branches Tags
${ item.name }
Create tag ${ searchTerm }
Create branch ${ searchTerm }
from '8c0f758a57'
${ noResults }
source-engine/engine/audio/snd_wave_mixer_xma.cpp

959 lines
30 KiB
Raw Blame History

//========= Copyright Valve Corporation, All rights reserved. ============//
//
// Purpose: XMA Decoding
//
//=====================================================================================//
#include "audio_pch.h"
#include "tier1/mempool.h"
#include "circularbuffer.h"
#include "tier1/utllinkedlist.h"
// memdbgon must be the last include file in a .cpp file!!!
#include "tier0/memdbgon.h"
//#define DEBUG_XMA
// Failed attempt to allow mixer to request data that is immediately discarded
// to support < 0 delay samples
//#define ALLOW_SKIP_SAMPLES
// XMA is supposed to decode at an ideal max of 512 mono samples every 4msec.
// XMA can only peel a max of 1984 stereo samples per poll request (if available).
// Max is not achievable and degrades based on quality settings, stereo, etc, but using these numbers for for calcs.
// 1984 stereo samples should be decoded by xma in 31 msec.
// 1984 stereo samples at 44.1Khz dictates a request every 45 msec.
// GetOutputData() must be clocked faster than 45 msec or samples will not be available.
// However, the XMA decoder must be serviced much faster. It was designed for 5 msec.
// 15 msec seems to be fast enough for XMA to decode enough to keep the smaller buffer sizes satisfied, and have slop for +/- 5 msec swings.
// Need at least this amount of decoded pcm samples before mixing can commence.
// This needs to be able to cover the initial mix request, while a new decode cycle is in flight.
#define MIN_READYTOMIX ( ( 2 * XMA_POLL_RATE ) * 0.001f )
// number of samples that xma decodes
// must be 128 aligned for mono (1984 is hw max for stereo)
#define XMA_MONO_OUTPUT_BUFFER_SAMPLES 2048
#define XMA_STEREO_OUTPUT_BUFFER_SAMPLES 1920
// for decoder input
// xma blocks are fetched from the datacache into one of these hw buffers for decoding
// must be in quantum units of XMA_BLOCK_SIZE
#define XMA_INPUT_BUFFER_SIZE ( 8 * XMA_BLOCK_SIZE )
// circular staging buffer to drain xma decoder and stage until mixer requests
// must be large enough to hold the slowest expected mixing frame worth of samples
#define PCM_STAGING_BUFFER_TIME 200
// xma physical heap, supplies xma input buffers for hw decoder
// each potential channel must be able to peel 2 buffers for driving xma decoder
#define XMA_PHYSICAL_HEAP_SIZE ( 2 * MAX_CHANNELS * XMA_INPUT_BUFFER_SIZE )
// in millseconds
#define MIX_IO_DATA_TIMEOUT 2000 // async i/o from dvd could be very late
#define MIX_DECODER_TIMEOUT 3000 // decoder might be very busy
#define MIX_DECODER_POLLING_LATENCY 5 // not faster than 5ms, or decoder will sputter
// diagnostic errors
#define ERROR_IO_DATA_TIMEOUT -1 // async i/o taking too long to deliver xma blocks
#define ERROR_IO_TRUNCATED_BLOCK -2 // async i/o failed to deliver complete blocks
#define ERROR_IO_NO_XMA_DATA -3 // async i/o failed to deliver any block
#define ERROR_DECODER_TIMEOUT -4 // decoder taking too long to decode xma blocks
#define ERROR_OUT_OF_MEMORY -5 // not enough physical memory for xma blocks
#define ERROR_XMA_PARSE -6 // decoder barfed on xma blocks
#define ERROR_XMA_CANTLOCK -7 // hw not acting as expected
#define ERROR_XMA_CANTSUBMIT -8 // hw not acting as expected
#define ERROR_XMA_CANTRESUME -9 // hw not acting as expected
#define ERROR_XMA_NO_PCM_DATA -10 // no xma decoded pcm data ready
#define ERROR_NULL_BUFFER -11 // logic flaw, expected buffer is null
const char *g_XMAErrorStrings[] =
{
"Unknown Error Code",
"Async I/O Data Timeout", // ERROR_IO_DATA_TIMEOUT
"Async I/O Truncated Block", // ERROR_IO_TRUNCATED_BLOCK
"Async I/O Data Not Ready", // ERROR_IO_NO_XMA_DATA
"Decoder Timeout", // ERROR_DECODER_TIMEOUT
"Out Of Memory", // ERROR_OUT_OF_MEMORY
"XMA Parse", // ERROR_XMA_PARSE
"XMA Cannot Lock", // ERROR_XMA_CANTLOCK
"XMA Cannot Submit", // ERROR_XMA_CANTSUBMIT
"XMA Cannot Resume", // ERROR_XMA_CANTRESUME
"XMA No PCM Data Ready", // ERROR_XMA_NO_PCM_DATA
"NULL Buffer", // ERROR_NULL_BUFFER
};
class CXMAAllocator
{
public:
static void *Alloc( int bytes )
{
MEM_ALLOC_CREDIT();
return XMemAlloc( bytes,
MAKE_XALLOC_ATTRIBUTES(
0,
false,
TRUE,
FALSE,
eXALLOCAllocatorId_XAUDIO,
XALLOC_PHYSICAL_ALIGNMENT_4K,
XALLOC_MEMPROTECT_WRITECOMBINE_LARGE_PAGES,
FALSE,
XALLOC_MEMTYPE_PHYSICAL ) );
}
static void Free( void *p )
{
XMemFree( p,
MAKE_XALLOC_ATTRIBUTES(
0,
false,
TRUE,
FALSE,
eXALLOCAllocatorId_XAUDIO,
XALLOC_PHYSICAL_ALIGNMENT_4K,
XALLOC_MEMPROTECT_WRITECOMBINE_LARGE_PAGES,
FALSE,
XALLOC_MEMTYPE_PHYSICAL ) );
}
};
// for XMA decoding, fixed size allocations aligned to 4K from a single physical heap
CAlignedMemPool< XMA_INPUT_BUFFER_SIZE, 4096, XMA_PHYSICAL_HEAP_SIZE, CXMAAllocator > g_XMAMemoryPool;
ConVar snd_xma_spew_warnings( "snd_xma_spew_warnings", "0" );
ConVar snd_xma_spew_startup( "snd_xma_spew_startup", "0" );
ConVar snd_xma_spew_mixers( "snd_xma_spew_mixers", "0" );
ConVar snd_xma_spew_decode( "snd_xma_spew_decode", "0" );
ConVar snd_xma_spew_drain( "snd_xma_spew_drain", "0" );
#ifdef DEBUG_XMA
ConVar snd_xma_record( "snd_xma_record", "0" );
ConVar snd_xma_spew_errors( "snd_xma_spew_errors", "0" );
#endif
//-----------------------------------------------------------------------------
// Purpose: Mixer for ADPCM encoded audio
//-----------------------------------------------------------------------------
class CAudioMixerWaveXMA : public CAudioMixerWave
{
public:
typedef CAudioMixerWave BaseClass;
CAudioMixerWaveXMA( IWaveData *data, int initialStreamPosition );
~CAudioMixerWaveXMA( void );
virtual void Mix( IAudioDevice *pDevice, channel_t *pChannel, void *pData, int outputOffset, int inputOffset, fixedint fracRate, int outCount, int timecompress );
virtual int GetOutputData( void **pData, int sampleCount, char copyBuf[AUDIOSOURCE_COPYBUF_SIZE] );
virtual void SetSampleStart( int newPosition );
virtual int GetPositionForSave();
virtual void SetPositionFromSaved( int savedPosition );
virtual int GetMixSampleSize() { return CalcSampleSize( 16, m_NumChannels ); }
virtual bool IsReadyToMix();
virtual bool ShouldContinueMixing();
private:
int GetXMABlocksAndSubmitToDecoder( bool bDecoderLocked );
int UpdatePositionForLooping( int *pNumRequestedSamples );
int ServiceXMADecoder( bool bForceUpdate );
int GetPCMSamples( int numRequested, char *pData );
XMAPLAYBACK *m_pXMAPlayback;
// input buffers, encoded xma
byte *m_pXMABuffers[2];
int m_XMABufferIndex;
// output buffer, decoded pcm samples, a staging circular buffer, waiting for mixer requests
// due to staging nature, contains decoded samples from multiple input buffers
CCircularBuffer *m_pPCMSamples;
int m_SampleRate;
int m_NumChannels;
// maximum possible decoded samples
int m_SampleCount;
// decoded sample position
int m_SamplePosition;
// current data marker
int m_LastDataOffset;
int m_DataOffset;
// total bytes of data
int m_TotalBytes;
#if defined( ALLOW_SKIP_SAMPLES )
// number of samples to throwaway
int m_SkipSamples;
#endif
// timers
unsigned int m_StartTime;
unsigned int m_LastDrainTime;
unsigned int m_LastPollTime;
int m_hMixerList;
int m_Error;
unsigned int m_bStartedMixing : 1;
unsigned int m_bFinished : 1;
unsigned int m_bLooped : 1;
};
CUtlFixedLinkedList< CAudioMixerWaveXMA * > g_XMAMixerList;
CON_COMMAND( snd_xma_info, "Spew XMA Info" )
{
Msg( "XMA Memory:\n" );
Msg( " Blocks Allocated: %d\n", g_XMAMemoryPool.NumAllocated() );
Msg( " Blocks Free: %d\n", g_XMAMemoryPool.NumFree() );
Msg( " Total Bytes: %d\n", g_XMAMemoryPool.BytesTotal() );
Msg( "Active XMA Mixers: %d\n", g_XMAMixerList.Count() );
for ( int hMixer = g_XMAMixerList.Head(); hMixer != g_XMAMixerList.InvalidIndex(); hMixer = g_XMAMixerList.Next( hMixer ) )
{
CAudioMixerWaveXMA *pXMAMixer = g_XMAMixerList[hMixer];
Msg( " rate:%5d ch:%1d '%s'\n", pXMAMixer->GetSource()->SampleRate(), pXMAMixer->GetSource()->IsStereoWav() ? 2 : 1, pXMAMixer->GetSource()->GetFileName() );
}
}
CAudioMixerWaveXMA::CAudioMixerWaveXMA( IWaveData *data, int initialStreamPosition ) : CAudioMixerWave( data )
{
Assert( dynamic_cast<CAudioSourceWave *>(&m_pData->Source()) != NULL );
m_Error = 0;
m_NumChannels = m_pData->Source().IsStereoWav() ? 2 : 1;
m_SampleRate = m_pData->Source().SampleRate();
m_bLooped = m_pData->Source().IsLooped();
m_SampleCount = m_pData->Source().SampleCount();
m_TotalBytes = m_pData->Source().DataSize();
#if defined( ALLOW_SKIP_SAMPLES )
m_SkipSamples = 0;
#endif
m_LastDataOffset = initialStreamPosition;
m_DataOffset = initialStreamPosition;
m_SamplePosition = 0;
if ( initialStreamPosition )
{
m_SamplePosition = m_pData->Source().StreamToSamplePosition( initialStreamPosition );
CAudioMixerWave::m_sample_loaded_index = m_SamplePosition;
CAudioMixerWave::m_sample_max_loaded = m_SamplePosition + 1;
}
m_bStartedMixing = false;
m_bFinished = false;
m_StartTime = 0;
m_LastPollTime = 0;
m_LastDrainTime = 0;
m_pXMAPlayback = NULL;
m_pPCMSamples = NULL;
m_pXMABuffers[0] = NULL;
m_pXMABuffers[1] = NULL;
m_XMABufferIndex = 0;
m_hMixerList = g_XMAMixerList.AddToTail( this );
#ifdef DEBUG_XMA
if ( snd_xma_record.GetBool() )
{
WaveCreateTmpFile( "debug.wav", m_SampleRate, 16, m_NumChannels );
}
#endif
if ( snd_xma_spew_mixers.GetBool() )
{
Msg( "XMA: 0x%8.8x (%2d), Mixer Alloc, '%s'\n", (unsigned int)this, g_XMAMixerList.Count(), m_pData->Source().GetFileName() );
}
}
CAudioMixerWaveXMA::~CAudioMixerWaveXMA( void )
{
if ( m_pXMAPlayback )
{
XMAPlaybackDestroy( m_pXMAPlayback );
g_XMAMemoryPool.Free( m_pXMABuffers[0] );
if ( m_pXMABuffers[1] )
{
g_XMAMemoryPool.Free( m_pXMABuffers[1] );
}
}
if ( m_pPCMSamples )
{
FreeCircularBuffer( m_pPCMSamples );
}
g_XMAMixerList.Remove( m_hMixerList );
if ( snd_xma_spew_mixers.GetBool() )
{
Msg( "XMA: 0x%8.8x (%2d), Mixer Freed, '%s'\n", (unsigned int)this, g_XMAMixerList.Count(), m_pData->Source().GetFileName() );
}
}
void CAudioMixerWaveXMA::Mix( IAudioDevice *pDevice, channel_t *pChannel, void *pData, int outputOffset, int inputOffset, fixedint fracRate, int outCount, int timecompress )
{
if ( m_NumChannels == 1 )
{
pDevice->Mix16Mono( pChannel, (short *)pData, outputOffset, inputOffset, fracRate, outCount, timecompress );
}
else
{
pDevice->Mix16Stereo( pChannel, (short *)pData, outputOffset, inputOffset, fracRate, outCount, timecompress );
}
}
//-----------------------------------------------------------------------------
// Looping is achieved in two passes to provide a circular view of the linear data.
// Pass1: Clamps a sample request to the end of data.
// Pass2: Snaps to the loop start, and returns the number of samples to discard, could be 0,
// up to the expected loop sample position.
// Returns the number of samples to discard, or 0.
//-----------------------------------------------------------------------------
int CAudioMixerWaveXMA::UpdatePositionForLooping( int *pNumRequestedSamples )
{
if ( !m_bLooped )
{
// not looping, no fixups
return 0;
}
int numLeadingSamples;
int numTrailingSamples;
CAudioSourceWave &source = reinterpret_cast<CAudioSourceWave &>(m_pData->Source());
int loopSampleStart = source.GetLoopingInfo( NULL, &numLeadingSamples, &numTrailingSamples );
int numRemainingSamples = ( m_SampleCount - numTrailingSamples ) - m_SamplePosition;
// possibly straddling the end of data (and thus about to loop)
// want to split the straddle into two regions, due to loops possibly requiring a trailer and leader of discarded samples
if ( numRemainingSamples > 0 )
{
// first region, all the remaining samples, clamped until end of desired data
*pNumRequestedSamples = min( *pNumRequestedSamples, numRemainingSamples );
// nothing to discard
return 0;
}
else if ( numRemainingSamples == 0 )
{
// at exact end of desired data, snap the sample position back
// the position will be correct AFTER discarding decoded trailing and leading samples
m_SamplePosition = loopSampleStart;
// clamp the request
numRemainingSamples = ( m_SampleCount - numTrailingSamples ) - m_SamplePosition;
*pNumRequestedSamples = min( *pNumRequestedSamples, numRemainingSamples );
// flush these samples so the sample position is the real loop sample starting position
return numTrailingSamples + numLeadingSamples;
}
return 0;
}
//-----------------------------------------------------------------------------
// Get and submit XMA block(s). The decoder must stay blocks ahead of mixer
// so the decoded samples are available for peeling.
// An XMA file is thus treated as a series of fixed size large buffers (multiple xma blocks),
// which are streamed in sequentially. The XMA buffers may be delayed from the
// audio data cache due to async i/o latency.
// Returns < 0 if error, 0 if no decode started, 1 if decode submitted.
//-----------------------------------------------------------------------------
int CAudioMixerWaveXMA::GetXMABlocksAndSubmitToDecoder( bool bDecoderIsLocked )
{
int status = 0;
if ( m_DataOffset >= m_TotalBytes )
{
if ( !m_bLooped )
{
// end of file, no more data to decode
// not an error, because decoder finishes long before samples drained
return 0;
}
// start from beginning of loop
CAudioSourceWave &source = reinterpret_cast<CAudioSourceWave &>(m_pData->Source());
source.GetLoopingInfo( &m_DataOffset, NULL, NULL );
m_DataOffset *= XMA_BLOCK_SIZE;
}
HRESULT hr;
bool bLocked = false;
if ( !bDecoderIsLocked )
{
// decoder must be locked before any access
hr = XMAPlaybackRequestModifyLock( m_pXMAPlayback );
if ( FAILED( hr ) )
{
status = ERROR_XMA_CANTLOCK;
goto cleanUp;
}
hr = XMAPlaybackWaitUntilModifyLockObtained( m_pXMAPlayback );
if ( FAILED( hr ) )
{
status = ERROR_XMA_CANTLOCK;
goto cleanUp;
}
bLocked = true;
}
// the input buffer can never be less than a single xma block (buffer size is multiple blocks)
int bufferSize = min( m_TotalBytes - m_DataOffset, XMA_INPUT_BUFFER_SIZE );
if ( !bufferSize )
{
// EOF
goto cleanUp;
}
Assert( !( bufferSize % XMA_BLOCK_SIZE ) );
byte *pXMABuffer = m_pXMABuffers[m_XMABufferIndex & 0x01];
if ( !pXMABuffer )
{
// shouldn't happen, buffer should have been allocated
Assert( 0 );
status = ERROR_NULL_BUFFER;
goto cleanUp;
}
if ( !XMAPlaybackQueryReadyForMoreData( m_pXMAPlayback, 0 ) || XMAPlaybackQueryInputDataPending( m_pXMAPlayback, 0, pXMABuffer ) )
{
// decoder too saturated for more data or
// decoder still decoding from input hw buffer
goto cleanUp;
}
// get xma block(s)
// pump to get all of requested data
char *pData;
int total = 0;
while ( total < bufferSize )
{
int available = m_pData->ReadSourceData( (void **)&pData, m_DataOffset, bufferSize - total, NULL );
if ( !available )
break;
// aggregate into hw buffer
V_memcpy( pXMABuffer + total, pData, available );
m_DataOffset += available;
total += available;
}
if ( total != bufferSize )
{
if ( !total )
{
// failed to get any data, could be async latency or file error
status = ERROR_IO_NO_XMA_DATA;
}
else
{
// failed to get complete xma block(s)
status = ERROR_IO_TRUNCATED_BLOCK;
}
goto cleanUp;
}
// track the currently submitted offset
// this is used as a cheap method for save/restore because an XMA seek table is not available
m_LastDataOffset = m_DataOffset - total;
// start decoding the block(s) in the hw buffer
hr = XMAPlaybackSubmitData( m_pXMAPlayback, 0, pXMABuffer, bufferSize );
if ( FAILED( hr ) )
{
// failed to start decoder
status = ERROR_XMA_CANTSUBMIT;
goto cleanUp;
}
// decode submitted
status = 1;
// advance to next buffer
m_XMABufferIndex++;
if ( snd_xma_spew_decode.GetBool() )
{
Msg( "XMA: 0x%8.8x, XMABuffer: 0x%8.8x, BufferSize: %d, NextDataOffset: %d, %s\n", (unsigned int)this, pXMABuffer, bufferSize, m_DataOffset, m_pData->Source().GetFileName() );
}
cleanUp:
if ( bLocked )
{
// release the lock and let the decoder run
hr = XMAPlaybackResumePlayback( m_pXMAPlayback );
if ( FAILED( hr ) )
{
status = ERROR_XMA_CANTRESUME;
}
}
return status;
}
//-----------------------------------------------------------------------------
// Drain the XMA Decoder into the staging circular buffer of PCM for mixer.
// Fetch new XMA samples for the decoder.
//-----------------------------------------------------------------------------
int CAudioMixerWaveXMA::ServiceXMADecoder( bool bForceUpdate )
{
// allow decoder to work without being polled (lock causes a decoding stall)
// decoder must be allowed minimum operating latency
// the buffers are sized to compensate for the operating latency
if ( !bForceUpdate && ( Plat_MSTime() - m_LastPollTime <= MIX_DECODER_POLLING_LATENCY ) )
{
return 0;
}
m_LastPollTime = Plat_MSTime();
// lock and pause the decoder to gain access
HRESULT hr = XMAPlaybackRequestModifyLock( m_pXMAPlayback );
if ( FAILED( hr ) )
{
m_Error = ERROR_XMA_CANTLOCK;
return -1;
}
hr = XMAPlaybackWaitUntilModifyLockObtained( m_pXMAPlayback );
if ( FAILED( hr ) )
{
m_Error = ERROR_XMA_CANTLOCK;
return -1;
}
DWORD dwParseError = XMAPlaybackGetParseError( m_pXMAPlayback, 0 );
if ( dwParseError )
{
if ( snd_xma_spew_warnings.GetBool() )
{
Warning( "XMA: 0x%8.8x, Decoder Error, Parse: %d, '%s'\n", (unsigned int)this, dwParseError, m_pData->Source().GetFileName() );
}
m_Error = ERROR_XMA_PARSE;
return -1;
}
#ifdef DEBUG_XMA
if ( snd_xma_spew_errors.GetBool() )
{
DWORD dwError = XMAPlaybackGetErrorBits( m_pXMAPlayback, 0 );
if ( dwError )
{
Warning( "XMA: 0x%8.8x, Playback Error: %d, '%s'\n", (unsigned int)this, dwError, m_pData->Source().GetFileName() );
}
}
#endif
int numNewSamples = XMAPlaybackQueryAvailableData( m_pXMAPlayback, 0 );
int numMaxSamples = m_pPCMSamples->GetWriteAvailable()/( m_NumChannels*sizeof( short ) );
int numSamples = min( numNewSamples, numMaxSamples );
while ( numSamples )
{
char *pPCMData = NULL;
int numSamplesDecoded = XMAPlaybackConsumeDecodedData( m_pXMAPlayback, 0, numSamples, (void**)&pPCMData );
// put into staging buffer, ready for mixer to drain
m_pPCMSamples->Write( pPCMData, numSamplesDecoded*m_NumChannels*sizeof( short ) );
numSamples -= numSamplesDecoded;
numNewSamples -= numSamplesDecoded;
}
// queue up more blocks for the decoder
// the decoder will always finish ahead of the mixer, submit nothing, and the mixer will still be draining
int decodeStatus = GetXMABlocksAndSubmitToDecoder( true );
if ( decodeStatus < 0 )
{
m_Error = decodeStatus;
return -1;
}
m_bFinished = ( numNewSamples == 0 ) && ( decodeStatus == 0 ) && XMAPlaybackIsIdle( m_pXMAPlayback, 0 );
// decoder was paused for access, let the decoder run
hr = XMAPlaybackResumePlayback( m_pXMAPlayback );
if ( FAILED( hr ) )
{
m_Error = ERROR_XMA_CANTRESUME;
return -1;
}
return 1;
}
//-----------------------------------------------------------------------------
// Drain the PCM staging buffer.
// Copy samples (numSamplesToCopy && pData). Return actual copied.
// Flush Samples (numSamplesToCopy && !pData). Return actual flushed.
// Query available number of samples (!numSamplesToCopy && !pData). Returns available.
//-----------------------------------------------------------------------------
int CAudioMixerWaveXMA::GetPCMSamples( int numSamplesToCopy, char *pData )
{
int numReadySamples = m_pPCMSamples->GetReadAvailable()/( m_NumChannels*sizeof( short ) );
// peel sequential samples from the stream's staging buffer
int numCopiedSamples = 0;
int numRequestedSamples = min( numSamplesToCopy, numReadySamples );
if ( numRequestedSamples )
{
if ( pData )
{
// copy to caller
m_pPCMSamples->Read( pData, numRequestedSamples*m_NumChannels*sizeof( short ) );
pData += numRequestedSamples*m_NumChannels*sizeof( short );
}
else
{
// flush
m_pPCMSamples->Advance( numRequestedSamples*m_NumChannels*sizeof( short ) );
}
numCopiedSamples += numRequestedSamples;
}
if ( snd_xma_spew_drain.GetBool() )
{
char *pOperation = ( numSamplesToCopy && !pData ) ? "Flushed" : "Copied";
Msg( "XMA: 0x%8.8x, SamplePosition: %d, Ready: %d, Requested: %d, %s: %d, Elapsed: %d ms '%s'\n",
(unsigned int)this, m_SamplePosition, numReadySamples, numSamplesToCopy, pOperation, numCopiedSamples, Plat_MSTime() - m_LastDrainTime, m_pData->Source().GetFileName() );
}
m_LastDrainTime = Plat_MSTime();
if ( numSamplesToCopy )
{
// could be actual flushed or actual copied
return numCopiedSamples;
}
if ( !pData )
{
// satify query for available
return numReadySamples;
}
return 0;
}
//-----------------------------------------------------------------------------
// Stall mixing until initial buffer of decoded samples are available.
//-----------------------------------------------------------------------------
bool CAudioMixerWaveXMA::IsReadyToMix()
{
// XMA mixing cannot be driven from the main thread
Assert( ThreadInMainThread() == false );
if ( m_Error )
{
// error has been set
// let mixer try to get unavailable samples, which casues the real abort
return true;
}
if ( m_bStartedMixing )
{
// decoding process has started
return true;
}
if ( !m_pXMAPlayback )
{
// first time, finish setup
int numBuffers;
if ( m_bLooped || m_TotalBytes > XMA_INPUT_BUFFER_SIZE )
{
// data will cascade through multiple buffers
numBuffers = 2;
}
else
{
// data can fit into a single buffer
numBuffers = 1;
}
// xma data must be decoded from a hw friendly buffer
// pool should have buffers available
if ( g_XMAMemoryPool.BytesAllocated() != numBuffers * g_XMAMemoryPool.ChunkSize() )
{
for ( int i = 0; i < numBuffers; i++ )
{
m_pXMABuffers[i] = (byte*)g_XMAMemoryPool.Alloc();
}
XMA_PLAYBACK_INIT xmaPlaybackInit = { 0 };
xmaPlaybackInit.sampleRate = m_SampleRate;
xmaPlaybackInit.channelCount = m_NumChannels;
xmaPlaybackInit.subframesToDecode = 4;
xmaPlaybackInit.outputBufferSizeInSamples = ( m_NumChannels == 2 ) ? XMA_STEREO_OUTPUT_BUFFER_SAMPLES : XMA_MONO_OUTPUT_BUFFER_SAMPLES;
XMAPlaybackCreate( 1, &xmaPlaybackInit, 0, &m_pXMAPlayback );
int stagingSize = PCM_STAGING_BUFFER_TIME * m_SampleRate * m_NumChannels * sizeof( short ) * 0.001f;
m_pPCMSamples = AllocateCircularBuffer( AlignValue( stagingSize, 4 ) );
}
else
{
// too many sounds playing, no xma buffers free
m_Error = ERROR_OUT_OF_MEMORY;
return true;
}
m_StartTime = Plat_MSTime();
}
// waiting for samples
// allow decoder to work without being polled (lock causes a decoding stall)
if ( Plat_MSTime() - m_LastPollTime <= MIX_DECODER_POLLING_LATENCY )
{
return false;
}
m_LastPollTime = Plat_MSTime();
// must have buffers in flight before mixing can begin
if ( m_DataOffset == m_LastDataOffset )
{
// keep trying to get data, async i/o has some allowable latency
int decodeStatus = GetXMABlocksAndSubmitToDecoder( false );
if ( decodeStatus < 0 && decodeStatus != ERROR_IO_NO_XMA_DATA )
{
m_Error = decodeStatus;
return true;
}
else if ( !decodeStatus || decodeStatus == ERROR_IO_NO_XMA_DATA )
{
// async streaming latency could be to blame, check watchdog
if ( Plat_MSTime() - m_StartTime >= MIX_IO_DATA_TIMEOUT )
{
m_Error = ERROR_IO_DATA_TIMEOUT;
}
return false;
}
}
// get the available samples ready for immediate mixing
if ( ServiceXMADecoder( true ) < 0 )
{
return true;
}
// can't mix until we have a minimum threshold of data or the decoder is finished
int minSamplesNeeded = m_bFinished ? 0 : MIN_READYTOMIX * m_SampleRate;
#if defined( ALLOW_SKIP_SAMPLES )
minSamplesNeeded += m_bFinished ? 0 : m_SkipSamples;
#endif
int numReadySamples = GetPCMSamples( 0, NULL );
if ( numReadySamples > minSamplesNeeded )
{
// decoder has samples ready for draining
m_bStartedMixing = true;
if ( snd_xma_spew_startup.GetBool() )
{
Msg( "XMA: 0x%8.8x, Startup Latency: %d ms, Samples Ready: %d, '%s'\n", (unsigned int)this, Plat_MSTime() - m_StartTime, numReadySamples, m_pData->Source().GetFileName() );
}
return true;
}
if ( Plat_MSTime() - m_StartTime >= MIX_DECODER_TIMEOUT )
{
m_Error = ERROR_DECODER_TIMEOUT;
}
// on startup error, let mixer start and get unavailable samples, and abort
// otherwise hold off mixing until samples arrive
return ( m_Error != 0 );
}
//-----------------------------------------------------------------------------
// Returns true to mix, false to stop mixer completely. Called after
// mixer requests samples.
//-----------------------------------------------------------------------------
bool CAudioMixerWaveXMA::ShouldContinueMixing()
{
if ( !IsRetail() && m_Error && snd_xma_spew_warnings.GetBool() )
{
const char *pErrorString;
if ( m_Error < 0 && -m_Error < ARRAYSIZE( g_XMAErrorStrings ) )
{
pErrorString = g_XMAErrorStrings[-m_Error];
}
else
{
pErrorString = g_XMAErrorStrings[0];
}
Warning( "XMA: 0x%8.8x, Mixer Aborted: %s, SamplePosition: %d/%d, DataOffset: %d/%d, '%s'\n",
(unsigned int)this, pErrorString, m_SamplePosition, m_SampleCount, m_DataOffset, m_TotalBytes, m_pData->Source().GetFileName() );
}
// an error condition is fatal to mixer
return ( m_Error == 0 && BaseClass::ShouldContinueMixing() );
}
//-----------------------------------------------------------------------------
// Read existing buffer or decompress a new block when necessary.
// If no samples can be fetched, returns 0, which hints the mixer to a pending shutdown state.
// This routines operates in large buffer quantums, and nothing smaller.
// XMA decode performance severly degrades if the lock is too frequent.
//-----------------------------------------------------------------------------
int CAudioMixerWaveXMA::GetOutputData( void **pData, int numSamplesToCopy, char copyBuf[AUDIOSOURCE_COPYBUF_SIZE] )
{
if ( m_Error )
{
// mixer will eventually shutdown
return 0;
}
if ( !m_bStartedMixing )
{
#if defined( ALLOW_SKIP_SAMPLES )
int numMaxSamples = AUDIOSOURCE_COPYBUF_SIZE/( m_NumChannels * sizeof( short ) );
numSamplesToCopy = min( numSamplesToCopy, numMaxSamples );
m_SkipSamples += numSamplesToCopy;
// caller requesting data before mixing has commenced
V_memset( copyBuf, 0, numSamplesToCopy );
*pData = (void*)copyBuf;
return numSamplesToCopy;
#else
// not allowed, GetOutputData() should only be called by the mixing loop
Assert( 0 );
return 0;
#endif
}
// XMA mixing cannot be driven from the main thread
Assert( ThreadInMainThread() == false );
// needs to be clocked at regular intervals
if ( ServiceXMADecoder( false ) < 0 )
{
return 0;
}
#if defined( ALLOW_SKIP_SAMPLES )
if ( m_SkipSamples > 0 )
{
// flush whatever is available
// ignore
m_SkipSamples -= GetPCMSamples( m_SkipSamples, NULL );
if ( m_SkipSamples != 0 )
{
// not enough decoded data ready to flush
// must flush these samples to maintain proper position
m_Error = ERROR_XMA_NO_PCM_DATA;
return 0;
}
}
#endif
// loopback may require flushing some decoded samples
int numRequestedSamples = numSamplesToCopy;
int numDiscardSamples = UpdatePositionForLooping( &numRequestedSamples );
if ( numDiscardSamples > 0 )
{
// loopback requires discarding samples to converge to expected looppoint
numDiscardSamples -= GetPCMSamples( numDiscardSamples, NULL );
if ( numDiscardSamples != 0 )
{
// not enough decoded data ready to flush
// must flush these samples to achieve looping
m_Error = ERROR_XMA_NO_PCM_DATA;
return 0;
}
}
// can only drain as much as can be copied to caller
int numMaxSamples = AUDIOSOURCE_COPYBUF_SIZE/( m_NumChannels * sizeof( short ) );
numRequestedSamples = min( numRequestedSamples, numMaxSamples );
int numCopiedSamples = GetPCMSamples( numRequestedSamples, copyBuf );
if ( numCopiedSamples )
{
CAudioMixerWave::m_sample_max_loaded += numCopiedSamples;
CAudioMixerWave::m_sample_loaded_index += numCopiedSamples;
// advance position by valid samples
m_SamplePosition += numCopiedSamples;
*pData = (void*)copyBuf;
#ifdef DEBUG_XMA
if ( snd_xma_record.GetBool() )
{
WaveAppendTmpFile( "debug.wav", copyBuf, 16, numCopiedSamples * m_NumChannels );
WaveFixupTmpFile( "debug.wav" );
}
#endif
}
else
{
// no samples copied
if ( !m_bFinished && numRequestedSamples )
{
// XMA latency error occurs when decoder not finished (not at EOF) and caller wanted samples but can't get any
if ( snd_xma_spew_warnings.GetInt() )
{
Warning( "XMA: 0x%8.8x, No Decoded Data Ready: %d samples needed, '%s'\n", (unsigned int)this, numSamplesToCopy, m_pData->Source().GetFileName() );
}
m_Error = ERROR_XMA_NO_PCM_DATA;
}
}
return numCopiedSamples;
}
//-----------------------------------------------------------------------------
// Purpose: Seek to a new position in the file
// NOTE: In most cases, only call this once, and call it before playing
// any data.
// Input : newPosition - new position in the sample clocks of this sample
//-----------------------------------------------------------------------------
void CAudioMixerWaveXMA::SetSampleStart( int newPosition )
{
// cannot support this
// this should be unused and thus not supporting
Assert( 0 );
}
int CAudioMixerWaveXMA::GetPositionForSave()
{
if ( m_bLooped )
{
// A looped sample cannot be saved/restored because the decoded sample position,
// which is needed for loop calc, cannot ever be correctly restored without
// the XMA seek table.
return 0;
}
// This is silly and totally wrong, but doing it anyways.
// The correct thing was to have the XMA seek table and use
// that to determine the correct packet. This is just a hopeful
// nearby approximation. Music did not have the seek table at
// the time of this code. The Seek table was added for vo
// restoration later.
return m_LastDataOffset;
}
void CAudioMixerWaveXMA::SetPositionFromSaved( int savedPosition )
{
// Not used here. The Mixer creation will be given the initial startup offset.
}
//-----------------------------------------------------------------------------
// Purpose: Abstract factory function for XMA mixers
//-----------------------------------------------------------------------------
CAudioMixer *CreateXMAMixer( IWaveData *data, int initialStreamPosition )
{
return new CAudioMixerWaveXMA( data, initialStreamPosition );
}