Modified source engine (2017) developed by valve and leaked in 2020. Not for commercial purporses
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
 
 
 
 
 
 

326 lines
7.3 KiB

#!/usr/bin/env perl
# ====================================================================
# Written by Andy Polyakov <appro@fy.chalmers.se> for the OpenSSL
# project. The module is, however, dual licensed under OpenSSL and
# CRYPTOGAMS licenses depending on where you obtain it. For further
# details see http://www.openssl.org/~appro/cryptogams/.
# ====================================================================
# I let hardware handle unaligned input(*), except on page boundaries
# (see below for details). Otherwise straightforward implementation
# with X vector in register bank. The module is big-endian [which is
# not big deal as there're no little-endian targets left around].
#
# (*) this means that this module is inappropriate for PPC403? Does
# anybody know if pre-POWER3 can sustain unaligned load?
# -m64 -m32
# ----------------------------------
# PPC970,gcc-4.0.0 +76% +59%
# Power6,xlc-7 +68% +33%
$flavour = shift;
if ($flavour =~ /64/) {
$SIZE_T =8;
$LRSAVE =2*$SIZE_T;
$UCMP ="cmpld";
$STU ="stdu";
$POP ="ld";
$PUSH ="std";
} elsif ($flavour =~ /32/) {
$SIZE_T =4;
$LRSAVE =$SIZE_T;
$UCMP ="cmplw";
$STU ="stwu";
$POP ="lwz";
$PUSH ="stw";
} else { die "nonsense $flavour"; }
$0 =~ m/(.*[\/\\])[^\/\\]+$/; $dir=$1;
( $xlate="${dir}ppc-xlate.pl" and -f $xlate ) or
( $xlate="${dir}../../perlasm/ppc-xlate.pl" and -f $xlate) or
die "can't locate ppc-xlate.pl";
open STDOUT,"| $^X $xlate $flavour ".shift || die "can't call $xlate: $!";
$FRAME=24*$SIZE_T+64;
$LOCALS=6*$SIZE_T;
$K ="r0";
$sp ="r1";
$toc="r2";
$ctx="r3";
$inp="r4";
$num="r5";
$t0 ="r15";
$t1 ="r6";
$A ="r7";
$B ="r8";
$C ="r9";
$D ="r10";
$E ="r11";
$T ="r12";
@V=($A,$B,$C,$D,$E,$T);
@X=("r16","r17","r18","r19","r20","r21","r22","r23",
"r24","r25","r26","r27","r28","r29","r30","r31");
sub BODY_00_19 {
my ($i,$a,$b,$c,$d,$e,$f)=@_;
my $j=$i+1;
$code.=<<___ if ($i==0);
lwz @X[$i],`$i*4`($inp)
___
$code.=<<___ if ($i<15);
lwz @X[$j],`$j*4`($inp)
add $f,$K,$e
rotlwi $e,$a,5
add $f,$f,@X[$i]
and $t0,$c,$b
add $f,$f,$e
andc $t1,$d,$b
rotlwi $b,$b,30
or $t0,$t0,$t1
add $f,$f,$t0
___
$code.=<<___ if ($i>=15);
add $f,$K,$e
rotlwi $e,$a,5
xor @X[$j%16],@X[$j%16],@X[($j+2)%16]
add $f,$f,@X[$i%16]
and $t0,$c,$b
xor @X[$j%16],@X[$j%16],@X[($j+8)%16]
add $f,$f,$e
andc $t1,$d,$b
rotlwi $b,$b,30
or $t0,$t0,$t1
xor @X[$j%16],@X[$j%16],@X[($j+13)%16]
add $f,$f,$t0
rotlwi @X[$j%16],@X[$j%16],1
___
}
sub BODY_20_39 {
my ($i,$a,$b,$c,$d,$e,$f)=@_;
my $j=$i+1;
$code.=<<___ if ($i<79);
add $f,$K,$e
rotlwi $e,$a,5
xor @X[$j%16],@X[$j%16],@X[($j+2)%16]
add $f,$f,@X[$i%16]
xor $t0,$b,$c
xor @X[$j%16],@X[$j%16],@X[($j+8)%16]
add $f,$f,$e
rotlwi $b,$b,30
xor $t0,$t0,$d
xor @X[$j%16],@X[$j%16],@X[($j+13)%16]
add $f,$f,$t0
rotlwi @X[$j%16],@X[$j%16],1
___
$code.=<<___ if ($i==79);
add $f,$K,$e
rotlwi $e,$a,5
lwz r16,0($ctx)
add $f,$f,@X[$i%16]
xor $t0,$b,$c
lwz r17,4($ctx)
add $f,$f,$e
rotlwi $b,$b,30
lwz r18,8($ctx)
xor $t0,$t0,$d
lwz r19,12($ctx)
add $f,$f,$t0
lwz r20,16($ctx)
___
}
sub BODY_40_59 {
my ($i,$a,$b,$c,$d,$e,$f)=@_;
my $j=$i+1;
$code.=<<___;
add $f,$K,$e
rotlwi $e,$a,5
xor @X[$j%16],@X[$j%16],@X[($j+2)%16]
add $f,$f,@X[$i%16]
and $t0,$b,$c
xor @X[$j%16],@X[$j%16],@X[($j+8)%16]
add $f,$f,$e
or $t1,$b,$c
rotlwi $b,$b,30
xor @X[$j%16],@X[$j%16],@X[($j+13)%16]
and $t1,$t1,$d
or $t0,$t0,$t1
rotlwi @X[$j%16],@X[$j%16],1
add $f,$f,$t0
___
}
$code=<<___;
.machine "any"
.text
.globl .sha1_block_data_order
.align 4
.sha1_block_data_order:
$STU $sp,-$FRAME($sp)
mflr r0
$PUSH r15,`$FRAME-$SIZE_T*17`($sp)
$PUSH r16,`$FRAME-$SIZE_T*16`($sp)
$PUSH r17,`$FRAME-$SIZE_T*15`($sp)
$PUSH r18,`$FRAME-$SIZE_T*14`($sp)
$PUSH r19,`$FRAME-$SIZE_T*13`($sp)
$PUSH r20,`$FRAME-$SIZE_T*12`($sp)
$PUSH r21,`$FRAME-$SIZE_T*11`($sp)
$PUSH r22,`$FRAME-$SIZE_T*10`($sp)
$PUSH r23,`$FRAME-$SIZE_T*9`($sp)
$PUSH r24,`$FRAME-$SIZE_T*8`($sp)
$PUSH r25,`$FRAME-$SIZE_T*7`($sp)
$PUSH r26,`$FRAME-$SIZE_T*6`($sp)
$PUSH r27,`$FRAME-$SIZE_T*5`($sp)
$PUSH r28,`$FRAME-$SIZE_T*4`($sp)
$PUSH r29,`$FRAME-$SIZE_T*3`($sp)
$PUSH r30,`$FRAME-$SIZE_T*2`($sp)
$PUSH r31,`$FRAME-$SIZE_T*1`($sp)
$PUSH r0,`$FRAME+$LRSAVE`($sp)
lwz $A,0($ctx)
lwz $B,4($ctx)
lwz $C,8($ctx)
lwz $D,12($ctx)
lwz $E,16($ctx)
andi. r0,$inp,3
bne Lunaligned
Laligned:
mtctr $num
bl Lsha1_block_private
b Ldone
; PowerPC specification allows an implementation to be ill-behaved
; upon unaligned access which crosses page boundary. "Better safe
; than sorry" principle makes me treat it specially. But I don't
; look for particular offending word, but rather for 64-byte input
; block which crosses the boundary. Once found that block is aligned
; and hashed separately...
.align 4
Lunaligned:
subfic $t1,$inp,4096
andi. $t1,$t1,4095 ; distance to closest page boundary
srwi. $t1,$t1,6 ; t1/=64
beq Lcross_page
$UCMP $num,$t1
ble- Laligned ; didn't cross the page boundary
mtctr $t1
subfc $num,$t1,$num
bl Lsha1_block_private
Lcross_page:
li $t1,16
mtctr $t1
addi r20,$sp,$LOCALS ; spot within the frame
Lmemcpy:
lbz r16,0($inp)
lbz r17,1($inp)
lbz r18,2($inp)
lbz r19,3($inp)
addi $inp,$inp,4
stb r16,0(r20)
stb r17,1(r20)
stb r18,2(r20)
stb r19,3(r20)
addi r20,r20,4
bdnz Lmemcpy
$PUSH $inp,`$FRAME-$SIZE_T*18`($sp)
li $t1,1
addi $inp,$sp,$LOCALS
mtctr $t1
bl Lsha1_block_private
$POP $inp,`$FRAME-$SIZE_T*18`($sp)
addic. $num,$num,-1
bne- Lunaligned
Ldone:
$POP r0,`$FRAME+$LRSAVE`($sp)
$POP r15,`$FRAME-$SIZE_T*17`($sp)
$POP r16,`$FRAME-$SIZE_T*16`($sp)
$POP r17,`$FRAME-$SIZE_T*15`($sp)
$POP r18,`$FRAME-$SIZE_T*14`($sp)
$POP r19,`$FRAME-$SIZE_T*13`($sp)
$POP r20,`$FRAME-$SIZE_T*12`($sp)
$POP r21,`$FRAME-$SIZE_T*11`($sp)
$POP r22,`$FRAME-$SIZE_T*10`($sp)
$POP r23,`$FRAME-$SIZE_T*9`($sp)
$POP r24,`$FRAME-$SIZE_T*8`($sp)
$POP r25,`$FRAME-$SIZE_T*7`($sp)
$POP r26,`$FRAME-$SIZE_T*6`($sp)
$POP r27,`$FRAME-$SIZE_T*5`($sp)
$POP r28,`$FRAME-$SIZE_T*4`($sp)
$POP r29,`$FRAME-$SIZE_T*3`($sp)
$POP r30,`$FRAME-$SIZE_T*2`($sp)
$POP r31,`$FRAME-$SIZE_T*1`($sp)
mtlr r0
addi $sp,$sp,$FRAME
blr
.long 0
.byte 0,12,4,1,0x80,18,3,0
.long 0
___
# This is private block function, which uses tailored calling
# interface, namely upon entry SHA_CTX is pre-loaded to given
# registers and counter register contains amount of chunks to
# digest...
$code.=<<___;
.align 4
Lsha1_block_private:
___
$code.=<<___; # load K_00_19
lis $K,0x5a82
ori $K,$K,0x7999
___
for($i=0;$i<20;$i++) { &BODY_00_19($i,@V); unshift(@V,pop(@V)); }
$code.=<<___; # load K_20_39
lis $K,0x6ed9
ori $K,$K,0xeba1
___
for(;$i<40;$i++) { &BODY_20_39($i,@V); unshift(@V,pop(@V)); }
$code.=<<___; # load K_40_59
lis $K,0x8f1b
ori $K,$K,0xbcdc
___
for(;$i<60;$i++) { &BODY_40_59($i,@V); unshift(@V,pop(@V)); }
$code.=<<___; # load K_60_79
lis $K,0xca62
ori $K,$K,0xc1d6
___
for(;$i<80;$i++) { &BODY_20_39($i,@V); unshift(@V,pop(@V)); }
$code.=<<___;
add r16,r16,$E
add r17,r17,$T
add r18,r18,$A
add r19,r19,$B
add r20,r20,$C
stw r16,0($ctx)
mr $A,r16
stw r17,4($ctx)
mr $B,r17
stw r18,8($ctx)
mr $C,r18
stw r19,12($ctx)
mr $D,r19
stw r20,16($ctx)
mr $E,r20
addi $inp,$inp,`16*4`
bdnz- Lsha1_block_private
blr
.long 0
.byte 0,12,0x14,0,0,0,0,0
___
$code.=<<___;
.asciz "SHA1 block transform for PPC, CRYPTOGAMS by <appro\@fy.chalmers.se>"
___
$code =~ s/\`([^\`]*)\`/eval $1/gem;
print $code;
close STDOUT;