Modified source engine (2017) developed by valve and leaked in 2020. Not for commercial purporses
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
 
 
 
 
 
 

271 lines
7.1 KiB

//========= Copyright Valve Corporation, All rights reserved. ============//
//
// Purpose:
//
// $NoKeywords: $
//=============================================================================//
#include <mxtk/mx.h>
#include <stdio.h>
#include "resource.h"
#include "EdgeProperties.h"
#include "mdlviewer.h"
#include "hlfaceposer.h"
#include "choreoevent.h"
#include "choreoscene.h"
#include "expressions.h"
#include "choreoactor.h"
#include "ifaceposersound.h"
#include "expclass.h"
#include "scriplib.h"
static CEdgePropertiesParams g_Params;
void CEdgePropertiesParams::SetFromFlexTrack( CFlexAnimationTrack *track )
{
for ( int i = 0 ; i < 2; ++i )
{
m_bActive[ i ] = track->IsEdgeActive( i == 0 ? true : false );
int curveType = 0;
track->GetEdgeInfo( i == 0 ? true : false, curveType, m_flValue[ i ] );
if ( i == 0 )
{
m_InterpolatorType[ i ] = GET_RIGHT_CURVE( curveType );
}
else
{
m_InterpolatorType[ i ] = GET_LEFT_CURVE( curveType );
}
}
}
void CEdgePropertiesParams::ApplyToTrack( CFlexAnimationTrack *track )
{
for ( int i = 0 ; i < 2; ++i )
{
track->SetEdgeActive( i == 0 ? true : false, m_bActive[ i ] );
int curveType = 0;
if ( i == 0 )
{
curveType = MAKE_CURVE_TYPE( 0, m_InterpolatorType[ i ] );
}
else
{
curveType = MAKE_CURVE_TYPE( m_InterpolatorType[ i ], 0 );
}
track->SetEdgeInfo( i == 0 ? true : false, curveType, m_flValue[ i ] );
}
}
void CEdgePropertiesParams::SetFromCurve( CCurveData *ramp )
{
for ( int i = 0 ; i < 2; ++i )
{
m_bActive[ i ] = ramp->IsEdgeActive( i == 0 ? true : false );
int curveType = 0;
ramp->GetEdgeInfo( i == 0 ? true : false, curveType, m_flValue[ i ] );
if ( i == 0 )
{
m_InterpolatorType[ i ] = GET_RIGHT_CURVE( curveType );
}
else
{
m_InterpolatorType[ i ] = GET_LEFT_CURVE( curveType );
}
}
}
void CEdgePropertiesParams::ApplyToCurve( CCurveData *ramp )
{
for ( int i = 0 ; i < 2; ++i )
{
ramp->SetEdgeActive( i == 0 ? true : false, m_bActive[ i ] );
int curveType = 0;
if ( i == 0 )
{
curveType = MAKE_CURVE_TYPE( 0, m_InterpolatorType[ i ] );
}
else
{
curveType = MAKE_CURVE_TYPE( m_InterpolatorType[ i ], 0 );
}
ramp->SetEdgeInfo( i == 0 ? true : false, curveType, m_flValue[ i ] );
}
}
static void PopulateCurveType( HWND control, CEdgePropertiesParams *params, bool isLeftEdge )
{
SendMessage( control, CB_RESETCONTENT, 0, 0 );
for ( int i = 0; i < NUM_INTERPOLATE_TYPES; ++i )
{
SendMessage( control, CB_ADDSTRING, 0, (LPARAM)Interpolator_NameForInterpolator( i, true ) );
}
SendMessage( control, CB_SETCURSEL , params->m_InterpolatorType[ isLeftEdge ? 0 : 1 ], 0 );
}
static void Reset( HWND hwndDlg, bool left )
{
SendMessage( GetDlgItem( hwndDlg, left ? IDC_LEFT_ACTIVE : IDC_RIGHT_ACTIVE ), BM_SETCHECK,
( WPARAM )BST_UNCHECKED,
( LPARAM )0 );
SendMessage( GetDlgItem( hwndDlg, left ? IDC_LEFT_CURVETYPE : IDC_RIGHT_CURVETYPE ), CB_SETCURSEL, 0, 0 );
SetDlgItemText( hwndDlg, left ? IDC_LEFT_ZEROVALUE : IDC_RIGHT_ZEROVALUE, "0.0" );
SendMessage( GetDlgItem( hwndDlg, IDC_HOLD_OUT ), BM_SETCHECK,
( WPARAM )BST_UNCHECKED,
( LPARAM )0 );
}
//-----------------------------------------------------------------------------
// Purpose:
// Input : hwndDlg -
// uMsg -
// wParam -
// lParam -
// Output : static BOOL CALLBACK
//-----------------------------------------------------------------------------
static BOOL CALLBACK EdgePropertiesDialogProc( HWND hwndDlg, UINT uMsg, WPARAM wParam, LPARAM lParam )
{
switch(uMsg)
{
case WM_INITDIALOG:
{
g_Params.PositionSelf( hwndDlg );
PopulateCurveType( GetDlgItem( hwndDlg, IDC_LEFT_CURVETYPE ), &g_Params, true );
PopulateCurveType( GetDlgItem( hwndDlg, IDC_RIGHT_CURVETYPE ), &g_Params, false );
SetDlgItemText( hwndDlg, IDC_LEFT_ZEROVALUE, va( "%f", g_Params.m_flValue[ 0 ] ) );
SetDlgItemText( hwndDlg, IDC_RIGHT_ZEROVALUE, va( "%f", g_Params.m_flValue[ 1 ] ) );
SendMessage( GetDlgItem( hwndDlg, IDC_LEFT_ACTIVE ), BM_SETCHECK,
( WPARAM ) g_Params.m_bActive[ 0 ] ? BST_CHECKED : BST_UNCHECKED,
( LPARAM )0 );
SendMessage( GetDlgItem( hwndDlg, IDC_RIGHT_ACTIVE ), BM_SETCHECK,
( WPARAM ) g_Params.m_bActive[ 1 ] ? BST_CHECKED : BST_UNCHECKED,
( LPARAM )0 );
SetWindowText( hwndDlg, g_Params.m_szDialogTitle );
SetFocus( GetDlgItem( hwndDlg, IDC_LEFT_ZEROVALUE ) );
}
return FALSE;
case WM_COMMAND:
switch (LOWORD(wParam))
{
case IDC_LEFT_RESET:
{
Reset( hwndDlg, true );
}
break;
case IDC_RIGHT_RESET:
{
Reset( hwndDlg, false );
}
break;
case IDC_LEFT_CURVETYPE:
{
if ( HIWORD( wParam ) == CBN_SELCHANGE )
{
SendMessage( GetDlgItem( hwndDlg, IDC_LEFT_ACTIVE ), BM_SETCHECK,
( WPARAM ) BST_CHECKED,
( LPARAM )0 );
}
}
break;
case IDC_RIGHT_CURVETYPE:
{
if ( HIWORD( wParam ) == CBN_SELCHANGE )
{
SendMessage( GetDlgItem( hwndDlg, IDC_RIGHT_ACTIVE ), BM_SETCHECK,
( WPARAM ) BST_CHECKED,
( LPARAM )0 );
}
}
break;
case IDC_LEFT_ZEROVALUE:
{
if ( HIWORD( wParam ) == EN_CHANGE )
{
SendMessage( GetDlgItem( hwndDlg, IDC_LEFT_ACTIVE ), BM_SETCHECK,
( WPARAM ) BST_CHECKED,
( LPARAM )0 );
}
}
break;
case IDC_RIGHT_ZEROVALUE:
{
if ( HIWORD( wParam ) == EN_CHANGE )
{
SendMessage( GetDlgItem( hwndDlg, IDC_RIGHT_ACTIVE ), BM_SETCHECK,
( WPARAM ) BST_CHECKED,
( LPARAM )0 );
}
}
break;
case IDOK:
{
char sz[ 64 ];
GetDlgItemText( hwndDlg, IDC_LEFT_ZEROVALUE, sz, sizeof( sz ) );
g_Params.m_flValue[ 0 ] = clamp( Q_atof( sz ), 0.0f, 1.0f );
GetDlgItemText( hwndDlg, IDC_RIGHT_ZEROVALUE, sz, sizeof( sz ) );
g_Params.m_flValue[ 1 ] = clamp( Q_atof( sz ), 0.0f, 1.0f );
g_Params.m_bActive[ 0 ] = SendMessage( GetDlgItem( hwndDlg, IDC_LEFT_ACTIVE ), BM_GETCHECK, 0, 0 ) == BST_CHECKED ? true : false;
g_Params.m_bActive[ 1 ] = SendMessage( GetDlgItem( hwndDlg, IDC_RIGHT_ACTIVE ), BM_GETCHECK, 0, 0 ) == BST_CHECKED ? true : false;
int interpolatorType;
interpolatorType = SendMessage( GetDlgItem( hwndDlg, IDC_LEFT_CURVETYPE ), CB_GETCURSEL, 0, 0 );
if ( interpolatorType != CB_ERR )
{
g_Params.m_InterpolatorType[ 0 ] = interpolatorType;
}
interpolatorType = SendMessage( GetDlgItem( hwndDlg, IDC_RIGHT_CURVETYPE ), CB_GETCURSEL, 0, 0 );
if ( interpolatorType != CB_ERR )
{
g_Params.m_InterpolatorType[ 1 ] = interpolatorType;
}
EndDialog( hwndDlg, 1 );
}
break;
case IDCANCEL:
EndDialog( hwndDlg, 0 );
break;
}
return TRUE;
}
return FALSE;
}
//-----------------------------------------------------------------------------
// Purpose:
// Input : *view -
// *actor -
// Output : int
//-----------------------------------------------------------------------------
int EdgeProperties( CEdgePropertiesParams *params )
{
g_Params = *params;
int retval = DialogBox( (HINSTANCE)GetModuleHandle( 0 ),
MAKEINTRESOURCE( IDD_EDGEPROPERTIES ),
(HWND)g_MDLViewer->getHandle(),
(DLGPROC)EdgePropertiesDialogProc );
*params = g_Params;
return retval;
}