Modified source engine (2017) developed by valve and leaked in 2020. Not for commercial purporses
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.

425 lines
17 KiB

5 years ago
// XUnzip.h Version 1.1
//
// Authors: Mark Adler et al. (see below)
//
// Modified by: Lucian Wischik
// lu@wischik.com
//
// Version 1.0 - Turned C files into just a single CPP file
// - Made them compile cleanly as C++ files
// - Gave them simpler APIs
// - Added the ability to zip/unzip directly in memory without
// any intermediate files
//
// Modified by: Hans Dietrich
// hdietrich2@hotmail.com
//
// Version 1.1: - Added Unicode support to CreateZip() and ZipAdd()
// - Changed file names to avoid conflicts with Lucian's files
//
///////////////////////////////////////////////////////////////////////////////
//
// Lucian Wischik's comments:
// --------------------------
// THIS FILE is almost entirely based upon code by info-zip.
// It has been modified by Lucian Wischik.
// The original code may be found at http://www.info-zip.org
// The original copyright text follows.
//
///////////////////////////////////////////////////////////////////////////////
//
// Original authors' comments:
// ---------------------------
// This is version 2002-Feb-16 of the Info-ZIP copyright and license. The
// definitive version of this document should be available at
// ftp://ftp.info-zip.org/pub/infozip/license.html indefinitely.
//
// Copyright (c) 1990-2002 Info-ZIP. All rights reserved.
//
// For the purposes of this copyright and license, "Info-ZIP" is defined as
// the following set of individuals:
//
// Mark Adler, John Bush, Karl Davis, Harald Denker, Jean-Michel Dubois,
// Jean-loup Gailly, Hunter Goatley, Ian Gorman, Chris Herborth, Dirk Haase,
// Greg Hartwig, Robert Heath, Jonathan Hudson, Paul Kienitz,
// David Kirschbaum, Johnny Lee, Onno van der Linden, Igor Mandrichenko,
// Steve P. Miller, Sergio Monesi, Keith Owens, George Petrov, Greg Roelofs,
// Kai Uwe Rommel, Steve Salisbury, Dave Smith, Christian Spieler,
// Antoine Verheijen, Paul von Behren, Rich Wales, Mike White
//
// This software is provided "as is", without warranty of any kind, express
// or implied. In no event shall Info-ZIP or its contributors be held liable
// for any direct, indirect, incidental, special or consequential damages
// arising out of the use of or inability to use this software.
//
// Permission is granted to anyone to use this software for any purpose,
// including commercial applications, and to alter it and redistribute it
// freely, subject to the following restrictions:
//
// 1. Redistributions of source code must retain the above copyright notice,
// definition, disclaimer, and this list of conditions.
//
// 2. Redistributions in binary form (compiled executables) must reproduce
// the above copyright notice, definition, disclaimer, and this list of
// conditions in documentation and/or other materials provided with the
// distribution. The sole exception to this condition is redistribution
// of a standard UnZipSFX binary as part of a self-extracting archive;
// that is permitted without inclusion of this license, as long as the
// normal UnZipSFX banner has not been removed from the binary or disabled.
//
// 3. Altered versions--including, but not limited to, ports to new
// operating systems, existing ports with new graphical interfaces, and
// dynamic, shared, or static library versions--must be plainly marked
// as such and must not be misrepresented as being the original source.
// Such altered versions also must not be misrepresented as being
// Info-ZIP releases--including, but not limited to, labeling of the
// altered versions with the names "Info-ZIP" (or any variation thereof,
// including, but not limited to, different capitalizations),
// "Pocket UnZip", "WiZ" or "MacZip" without the explicit permission of
// Info-ZIP. Such altered versions are further prohibited from
// misrepresentative use of the Zip-Bugs or Info-ZIP e-mail addresses or
// of the Info-ZIP URL(s).
//
// 4. Info-ZIP retains the right to use the names "Info-ZIP", "Zip", "UnZip",
// "UnZipSFX", "WiZ", "Pocket UnZip", "Pocket Zip", and "MacZip" for its
// own source and binary releases.
//
///////////////////////////////////////////////////////////////////////////////
#ifndef XUNZIP_H
#define XUNZIP_H
#if !defined( DWORD )
#ifdef _WIN32
typedef unsigned long DWORD;
#else
typedef unsigned int DWORD;
#endif
#endif
#if !defined( TCHAR )
typedef char TCHAR;
#endif
#if defined(POSIX) && !defined(MAX_PATH)
#include <limits.h>
#define MAX_PATH PATH_MAX
typedef bool BOOL;
#endif
#ifndef XZIP_H
#if !defined(DECLARE_HANDLE)
#if !defined(HANDLE)
typedef void *HANDLE;
#endif
#define DECLARE_HANDLE(name) typedef struct name##__ { int unused; } *name
#endif
DECLARE_HANDLE(HZIP); // An HZIP identifies a zip file that is being created
#endif
#if defined(_WIN32) && !defined(_WINBASE_) && !defined(_FILETIME_)
#define _FILETIME_
typedef struct _FILETIME
{
DWORD dwLowDateTime;
DWORD dwHighDateTime;
} FILETIME, * LPFILETIME, *PFILETIME;
#endif
#if defined(POSIX)
typedef time_t FILETIME;
#endif
typedef DWORD ZRESULT;
// return codes from any of the zip functions. Listed later.
#define ZIP_HANDLE 1
#define ZIP_FILENAME 2
#define ZIP_MEMORY 3
typedef struct
{ int index; // index of this file within the zip
char name[MAX_PATH]; // filename within the zip
DWORD attr; // attributes, as in GetFileAttributes.
FILETIME atime,ctime,mtime;// access, create, modify filetimes
long comp_size; // sizes of item, compressed and uncompressed. These
long unc_size; // may be -1 if not yet known (e.g. being streamed in)
} ZIPENTRY;
typedef struct
{ int index; // index of this file within the zip
TCHAR name[MAX_PATH]; // filename within the zip
DWORD attr; // attributes, as in GetFileAttributes.
FILETIME atime,ctime,mtime;// access, create, modify filetimes
long comp_size; // sizes of item, compressed and uncompressed. These
long unc_size; // may be -1 if not yet known (e.g. being streamed in)
} ZIPENTRYW;
///////////////////////////////////////////////////////////////////////////////
//
// OpenZip()
//
// Purpose: Open an existing zip archive file
//
// Parameters: z - archive file name if flags is ZIP_FILENAME; for other
// uses see below
// len - for memory (ZIP_MEMORY) should be the buffer size;
// for other uses, should be 0
// flags - indicates usage, see below; for files, this will be
// ZIP_FILENAME
//
// Returns: HZIP - non-zero if zip archive opened ok, otherwise 0
//
HZIP OpenZip(void *z, unsigned int len, DWORD flags);
// OpenZip - opens a zip file and returns a handle with which you can
// subsequently examine its contents. You can open a zip file from:
// from a pipe: OpenZip(hpipe_read,0, ZIP_HANDLE);
// from a file (by handle): OpenZip(hfile,0, ZIP_HANDLE);
// from a file (by name): OpenZip("c:\\test.zip",0, ZIP_FILENAME);
// from a memory block: OpenZip(bufstart, buflen, ZIP_MEMORY);
// If the file is opened through a pipe, then items may only be
// accessed in increasing order, and an item may only be unzipped once,
// although GetZipItem can be called immediately before and after unzipping
// it. If it's opened i n any other way, then full random access is possible.
// Note: pipe input is not yet implemented.
///////////////////////////////////////////////////////////////////////////////
//
// GetZipItem()
//
// Purpose: Get information about an item in an open zip archive
//
// Parameters: hz - handle of open zip archive
// index - index number (0 based) of item in zip
// ze - pointer to a ZIPENTRY (if ANSI) or ZIPENTRYW struct
// (if Unicode)
//
// Returns: ZRESULT - ZR_OK if success, otherwise some other value
//
#ifdef _UNICODE
#define GetZipItem GetZipItemW
#else
#define GetZipItem GetZipItemA
#endif
ZRESULT GetZipItemA(HZIP hz, int index, ZIPENTRY *ze);
ZRESULT GetZipItemW(HZIP hz, int index, ZIPENTRYW *ze);
// GetZipItem - call this to get information about an item in the zip.
// If index is -1 and the file wasn't opened through a pipe,
// then it returns information about the whole zipfile
// (and in particular ze.index returns the number of index items).
// Note: the item might be a directory (ze.attr & FILE_ATTRIBUTE_DIRECTORY)
// See below for notes on what happens when you unzip such an item.
// Note: if you are opening the zip through a pipe, then random access
// is not possible and GetZipItem(-1) fails and you can't discover the number
// of items except by calling GetZipItem on each one of them in turn,
// starting at 0, until eventually the call fails. Also, in the event that
// you are opening through a pipe and the zip was itself created into a pipe,
// then then comp_size and sometimes unc_size as well may not be known until
// after the item has been unzipped.
///////////////////////////////////////////////////////////////////////////////
//
// FindZipItem()
//
// Purpose: Find item by name and return information about it
//
// Parameters: hz - handle of open zip archive
// name - name of file to look for inside zip archive
// ic - TRUE = case insensitive
// index - pointer to index number returned, or -1
// ze - pointer to a ZIPENTRY (if ANSI) or ZIPENTRYW struct
// (if Unicode)
//
// Returns: ZRESULT - ZR_OK if success, otherwise some other value
//
#ifdef _UNICODE
#define FindZipItem FindZipItemW
#else
#define FindZipItem FindZipItemA
#endif
ZRESULT FindZipItemA(HZIP hz, const TCHAR *name, bool ic, int *index, ZIPENTRY *ze);
ZRESULT FindZipItemW(HZIP hz, const TCHAR *name, bool ic, int *index, ZIPENTRYW *ze);
// FindZipItem - finds an item by name. ic means 'insensitive to case'.
// It returns the index of the item, and returns information about it.
// If nothing was found, then index is set to -1 and the function returns
// an error code.
///////////////////////////////////////////////////////////////////////////////
//
// UnzipItem()
//
// Purpose: Find item by index and unzip it
//
// Parameters: hz - handle of open zip archive
// index - index number of file to unzip
// dst - target file name of unzipped file
// len - for memory (ZIP_MEMORY. length of buffer;
// otherwise 0
// flags - indicates usage, see below; for files, this will be
// ZIP_FILENAME
//
// Returns: ZRESULT - ZR_OK if success, otherwise some other value
//
ZRESULT UnzipItem(HZIP hz, int index, void *dst, unsigned int len, DWORD flags);
// UnzipItem - given an index to an item, unzips it. You can unzip to:
// to a pipe: UnzipItem(hz,i, hpipe_write,0,ZIP_HANDLE);
// to a file (by handle): UnzipItem(hz,i, hfile,0,ZIP_HANDLE);
// to a file (by name): UnzipItem(hz,i, ze.name,0,ZIP_FILENAME);
// to a memory block: UnzipItem(hz,i, buf,buflen,ZIP_MEMORY);
// In the final case, if the buffer isn't large enough to hold it all,
// then the return code indicates that more is yet to come. If it was
// large enough, and you want to know precisely how big, GetZipItem.
// Note: zip files are normally stored with relative pathnames. If you
// unzip with ZIP_FILENAME a relative pathname then the item gets created
// relative to the current directory - it first ensures that all necessary
// subdirectories have been created. Also, the item may itself be a directory.
// If you unzip a directory with ZIP_FILENAME, then the directory gets created.
// If you unzip it to a handle or a memory block, then nothing gets created
// and it emits 0 bytes.
///////////////////////////////////////////////////////////////////////////////
//
// CloseZip()
//
// Purpose: Close an open zip archive
//
// Parameters: hz - handle to an open zip archive
//
// Returns: ZRESULT - ZR_OK if success, otherwise some other value
//
ZRESULT CloseZip(HZIP hz);
// CloseZip - the zip handle must be closed with this function.
unsigned int FormatZipMessage(ZRESULT code, char *buf,unsigned int len);
// FormatZipMessage - given an error code, formats it as a string.
// It returns the length of the error message. If buf/len points
// to a real buffer, then it also writes as much as possible into there.
// These are the result codes:
#define ZR_OK 0x00000000 // nb. the pseudo-code zr-recent is never returned,
#define ZR_RECENT 0x00000001 // but can be passed to FormatZipMessage.
// The following come from general system stuff (e.g. files not openable)
#define ZR_GENMASK 0x0000FF00
#define ZR_NODUPH 0x00000100 // couldn't duplicate the handle
#define ZR_NOFILE 0x00000200 // couldn't create/open the file
#define ZR_NOALLOC 0x00000300 // failed to allocate some resource
#define ZR_WRITE 0x00000400 // a general error writing to the file
#define ZR_NOTFOUND 0x00000500 // couldn't find that file in the zip
#define ZR_MORE 0x00000600 // there's still more data to be unzipped
#define ZR_CORRUPT 0x00000700 // the zipfile is corrupt or not a zipfile
#define ZR_READ 0x00000800 // a general error reading the file
// The following come from mistakes on the part of the caller
#define ZR_CALLERMASK 0x00FF0000
#define ZR_ARGS 0x00010000 // general mistake with the arguments
#define ZR_NOTMMAP 0x00020000 // tried to ZipGetMemory, but that only works on mmap zipfiles, which yours wasn't
#define ZR_MEMSIZE 0x00030000 // the memory size is too small
#define ZR_FAILED 0x00040000 // the thing was already failed when you called this function
#define ZR_ENDED 0x00050000 // the zip creation has already been closed
#define ZR_MISSIZE 0x00060000 // the indicated input file size turned out mistaken
#define ZR_PARTIALUNZ 0x00070000 // the file had already been partially unzipped
#define ZR_ZMODE 0x00080000 // tried to mix creating/opening a zip
// The following come from bugs within the zip library itself
#define ZR_BUGMASK 0xFF000000
#define ZR_NOTINITED 0x01000000 // initialisation didn't work
#define ZR_SEEK 0x02000000 // trying to seek in an unseekable file
#define ZR_NOCHANGE 0x04000000 // changed its mind on storage, but not allowed
#define ZR_FLATE 0x05000000 // an internal error in the de/inflation code
// e.g.
//
// SetCurrentDirectory("c:\\docs\\stuff");
// HZIP hz = OpenZip("c:\\stuff.zip",0,ZIP_FILENAME);
// ZIPENTRY ze; GetZipItem(hz,-1,&ze); int numitems=ze.index;
// for (int i=0; i<numitems; i++)
// { GetZipItem(hz,i,&ze);
// UnzipItem(hz,i,ze.name,0,ZIP_FILENAME);
// }
// CloseZip(hz);
//
//
// HRSRC hrsrc = FindResource(hInstance,MAKEINTRESOURCE(1),RT_RCDATA);
// HANDLE hglob = LoadResource(hInstance,hrsrc);
// void *zipbuf=LockResource(hglob);
// unsigned int ziplen=SizeofResource(hInstance,hrsrc);
// HZIP hz = OpenZip(zipbuf, ziplen, ZIP_MEMORY);
// - unzip to a membuffer -
// ZIPENTRY ze; int i; FindZipItem(hz,"file.dat",&i,&ze);
// char *ibuf = new char[ze.unc_size];
// UnzipItem(hz,i, ibuf, ze.unc_size,ZIP_MEMORY);
// delete[] buf;
// - unzip to a fixed membuff -
// ZIPENTRY ze; int i; FindZipItem(hz,"file.dat",&i,&ze);
// char ibuf[1024]; ZIPRESULT zr=ZR_MORE; unsigned long totsize=0;
// while (zr==ZR_MORE)
// { zr = UnzipItem(hz,i, ibuf,1024,ZIP_MEMORY);
// unsigned long bufsize=1024; if (zr==ZR_OK) bufsize=ze.unc_size-totsize;
// totsize+=bufsize;
// }
// - unzip to a pipe -
// HANDLE hthread=CreateWavReaderThread(&hread,&hwrite);
// FindZipItem(hz,"sound.wav",&i,&ze);
// UnzipItem(hz,i, hwrite,0,ZIP_HANDLE);
// CloseHandle(hwrite);
// WaitForSingleObject(hthread,INFINITE);
// CloseHandle(hread); CloseHandle(hthread);
// - finished -
// CloseZip(hz);
// // note: no need to free resources obtained through Find/Load/LockResource
//
//
// SetCurrentDirectory("c:\\docs\\pipedzipstuff");
// HANDLE hread,hwrite; CreatePipe(&hread,&hwrite);
// CreateZipWriterThread(hwrite);
// HZIP hz = OpenZip(hread,0,ZIP_HANDLE);
// for (int i=0; ; i++)
// { ZIPENTRY ze; ZRESULT res = GetZipItem(hz,i,&ze);
// if (res!=ZE_OK) break; // no more
// UnzipItem(hz,i, ze.name,0,ZIP_FILENAME);
// }
// CloseZip(hz);
//
// Now we indulge in a little skullduggery so that the code works whether
// the user has included just zip or both zip and unzip.
// Idea: if header files for both zip and unzip are present, then presumably
// the cpp files for zip and unzip are both present, so we will call
// one or the other of them based on a dynamic choice. If the header file
// for only one is present, then we will bind to that particular one.
HZIP OpenZipU(void *z,unsigned int len,DWORD flags);
ZRESULT CloseZipU(HZIP hz);
unsigned int FormatZipMessageU(ZRESULT code, char *buf,unsigned int len);
bool IsZipHandleU(HZIP hz);
#define OpenZip OpenZipU
#ifdef XZIP_H
#undef CloseZip
#define CloseZip(hz) (IsZipHandleU(hz)?CloseZipU(hz):CloseZipZ(hz))
#else
#define CloseZip CloseZipU
#define FormatZipMessage FormatZipMessageU
#endif
// safe defintion of unzip, catches exceptions
bool SafeUnzipMemory( const void *pvZipped, int cubZipped, void *pvDest, int cubDest /* should be the exact expected unzipped size */ );
#endif //XUNZIP_H