/* netchan.h - net channel abstraction layer Copyright (C) 2007 Uncle Mike This program is free software: you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation, either version 3 of the License, or (at your option) any later version. This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. */ #ifndef NET_MSG_H #define NET_MSG_H /* ========================================================== ELEMENTS COMMUNICATED ACROSS THE NET ========================================================== */ #include "crtlib.h" #include "net_buffer.h" // 0 == regular, 1 == file stream #define MAX_STREAMS 2 // flow control bytes per second limits #define MAX_RATE 100000.0f #define MIN_RATE 1000.0f // default data rate #define DEFAULT_RATE (9999.0f) // NETWORKING INFO // This is the packet payload without any header bytes (which are attached for actual sending) #define NET_MAX_PAYLOAD MAX_INIT_MSG // Theoretically maximum size of UDP-packet without header and hardware-specific data #define NET_MAX_FRAGMENT 65535 // because encoded as highpart of uint32 #define NET_MAX_BUFFER_ID 32767 // because encoded as lowpart of uint32 #define NET_MAX_BUFFERS_COUNT 32767 // This is the payload plus any header info (excluding UDP header) // Packet header is: // 4 bytes of outgoing seq // 4 bytes of incoming seq // and for each stream // { // byte (on/off) // int (fragment id) // int (startpos) // int (length) // } #define HEADER_BYTES ( 8 + MAX_STREAMS * 13 ) // Pad this to next higher 16 byte boundary // This is the largest packet that can come in/out over the wire, before processing the header // bytes will be stripped by the networking channel layer #define NET_MAX_MESSAGE PAD_NUMBER(( NET_MAX_PAYLOAD + HEADER_BYTES ), 16 ) #define MASTERSERVER_ADR "ms.xash.su:27010" #define MASTERSERVER_ADR2 "ms2.xash.su:27010" #define MS_SCAN_REQUEST "1\xFF" "0.0.0.0:0\0" #define PORT_MASTER 27010 #define PORT_CLIENT 27005 #define PORT_SERVER 27015 #define MULTIPLAYER_BACKUP 64 // how many data slots to use when in multiplayer (must be power of 2) #define SINGLEPLAYER_BACKUP 16 // same for single player #define CMD_BACKUP 64 // allow a lot of command backups for very fast systems #define CMD_MASK (CMD_BACKUP - 1) #define NUM_PACKET_ENTITIES 256 // 170 Mb for multiplayer with 32 players #define MAX_CUSTOM_BASELINES 64 #define NET_LEGACY_EXT_SPLIT (1U<<1) #define NETSPLIT_BACKUP 8 #define NETSPLIT_BACKUP_MASK (NETSPLIT_BACKUP - 1) #define NETSPLIT_HEADER_SIZE 18 #if XASH_LOW_MEMORY == 2 #undef MULTIPLAYER_BACKUP #undef SINGLEPLAYER_BACKUP #undef NUM_PACKET_ENTITIES #undef MAX_CUSTOM_BASELINES #undef NET_MAX_FRAGMENT #define MULTIPLAYER_BACKUP 4 // breaks protocol in legacy mode, new protocol status unknown #define SINGLEPLAYER_BACKUP 4 #define NUM_PACKET_ENTITIES 32 #define MAX_CUSTOM_BASELINES 8 #define NET_MAX_FRAGMENT 32768 #elif XASH_LOW_MEMORY == 1 #undef SINGLEPLAYER_BACKUP #undef NUM_PACKET_ENTITIES #undef MAX_CUSTOM_BASELINES #undef NET_MAX_FRAGMENT #define SINGLEPLAYER_BACKUP 4 #define NUM_PACKET_ENTITIES 64 #define MAX_CUSTOM_BASELINES 8 #define NET_MAX_FRAGMENT 32768 #endif typedef struct netsplit_chain_packet_s { // bool vector unsigned int recieved_v[8]; // serial number unsigned int id; byte data[NET_MAX_PAYLOAD]; byte received; byte count; } netsplit_chain_packet_t; // raw packet format typedef struct netsplit_packet_s { unsigned int signature; // 0xFFFFFFFE unsigned int length; unsigned int part; unsigned int id; // max 256 parts byte count; byte index; byte data[NET_MAX_PAYLOAD - NETSPLIT_HEADER_SIZE]; } netsplit_packet_t; typedef struct netsplit_s { netsplit_chain_packet_t packets[NETSPLIT_BACKUP]; integer64 total_received; integer64 total_received_uncompressed; } netsplit_t; // packet splitting qboolean NetSplit_GetLong( netsplit_t *ns, netadr_t *from, byte *data, size_t *length ); /* ============================================================== NET ============================================================== */ #define MAX_FLOWS 2 #define FLOW_OUTGOING 0 #define FLOW_INCOMING 1 #define MAX_LATENT 32 #define MASK_LATENT ( MAX_LATENT - 1 ) #define FRAG_NORMAL_STREAM 0 #define FRAG_FILE_STREAM 1 // message data typedef struct { int size; // size of message sent/received double time; // time that message was sent/received } flowstats_t; typedef struct { flowstats_t stats[MAX_LATENT]; // data for last MAX_LATENT messages int current; // current message position double nextcompute; // time when we should recompute k/sec data float kbytespersec; // average data float avgkbytespersec; int totalbytes; } flow_t; // generic fragment structure typedef struct fragbuf_s { struct fragbuf_s *next; // next buffer in chain int bufferid; // id of this buffer sizebuf_t frag_message; // message buffer where raw data is stored byte frag_message_buf[NET_MAX_FRAGMENT]; // the actual data sits here qboolean isfile; // is this a file buffer? qboolean isbuffer; // is this file buffer from memory ( custom decal, etc. ). qboolean iscompressed; // is compressed file, we should using filename.ztmp char filename[MAX_OSPATH]; // name of the file to save out on remote host int foffset; // offset in file from which to read data int size; // size of data to read at that offset } fragbuf_t; // Waiting list of fragbuf chains typedef struct fbufqueue_s { struct fbufqueue_s *next; // next chain in waiting list int fragbufcount; // number of buffers in this chain fragbuf_t *fragbufs; // the actual buffers } fragbufwaiting_t; typedef enum fragsize_e { FRAGSIZE_FRAG, FRAGSIZE_SPLIT, FRAGSIZE_UNRELIABLE } fragsize_t; // Network Connection Channel typedef struct netchan_s { netsrc_t sock; // NS_SERVER or NS_CLIENT, depending on channel. netadr_t remote_address; // address this channel is talking to. int qport; // qport value to write when transmitting double last_received; // for timeouts double connect_time; // Usage: host.realtime - netchan.connect_time double rate; // bandwidth choke. bytes per second double cleartime; // if realtime > cleartime, free to send next packet // Sequencing variables int incoming_sequence; // increasing count of sequence numbers int incoming_acknowledged; // # of last outgoing message that has been ack'd. int incoming_reliable_acknowledged; // toggles T/F as reliable messages are received. int incoming_reliable_sequence; // single bit, maintained local int outgoing_sequence; // message we are sending to remote int reliable_sequence; // whether the message contains reliable payload, single bit int last_reliable_sequence; // outgoing sequence number of last send that had reliable data // callback to get actual framgment size void *client; int (*pfnBlockSize)( void *cl, fragsize_t mode ); // staging and holding areas sizebuf_t message; byte message_buf[NET_MAX_MESSAGE]; // reliable message buffer. // we keep adding to it until reliable is acknowledged. Then we clear it. int reliable_length; byte reliable_buf[NET_MAX_MESSAGE]; // unacked reliable message (max size for loopback connection) // Waiting list of buffered fragments to go onto queue. // Multiple outgoing buffers can be queued in succession fragbufwaiting_t *waitlist[MAX_STREAMS]; int reliable_fragment[MAX_STREAMS]; // is reliable waiting buf a fragment? uint reliable_fragid[MAX_STREAMS]; // buffer id for each waiting fragment fragbuf_t *fragbufs[MAX_STREAMS]; // the current fragment being set int fragbufcount[MAX_STREAMS]; // the total number of fragments in this stream int frag_startpos[MAX_STREAMS]; // position in outgoing buffer where frag data starts int frag_length[MAX_STREAMS]; // length of frag data in the buffer fragbuf_t *incomingbufs[MAX_STREAMS]; // incoming fragments are stored here qboolean incomingready[MAX_STREAMS]; // set to true when incoming data is ready // Only referenced by the FRAG_FILE_STREAM component char incomingfilename[MAX_OSPATH]; // Name of file being downloaded void *tempbuffer; // download file buffer int tempbuffersize; // current size // incoming and outgoing flow metrics flow_t flow[MAX_FLOWS]; // added for net_speeds size_t total_sended; size_t total_received; qboolean split; unsigned int maxpacket; unsigned int splitid; netsplit_t netsplit; } netchan_t; extern netadr_t net_from; extern netadr_t net_local; extern sizebuf_t net_message; extern byte net_message_buffer[NET_MAX_MESSAGE]; extern convar_t *net_speeds; extern convar_t sv_lan; extern convar_t sv_lan_rate; extern int net_drop; void Netchan_Init( void ); void Netchan_Shutdown( void ); void Netchan_Setup( netsrc_t sock, netchan_t *chan, netadr_t adr, int qport, void *client, int (*pfnBlockSize)(void *, fragsize_t mode ) ); void Netchan_CreateFileFragmentsFromBuffer( netchan_t *chan, const char *filename, byte *pbuf, int size ); qboolean Netchan_CopyNormalFragments( netchan_t *chan, sizebuf_t *msg, size_t *length ); qboolean Netchan_CopyFileFragments( netchan_t *chan, sizebuf_t *msg ); void Netchan_CreateFragments( netchan_t *chan, sizebuf_t *msg ); int Netchan_CreateFileFragments( netchan_t *chan, const char *filename ); void Netchan_Transmit( netchan_t *chan, int lengthInBytes, byte *data ); void Netchan_TransmitBits( netchan_t *chan, int lengthInBits, byte *data ); void Netchan_OutOfBand( int net_socket, netadr_t adr, int length, byte *data ); void Netchan_OutOfBandPrint( int net_socket, netadr_t adr, char *format, ... ) _format( 3 ); qboolean Netchan_Process( netchan_t *chan, sizebuf_t *msg ); void Netchan_UpdateProgress( netchan_t *chan ); qboolean Netchan_IncomingReady( netchan_t *chan ); qboolean Netchan_CanPacket( netchan_t *chan, qboolean choke ); qboolean Netchan_IsLocal( netchan_t *chan ); void Netchan_ReportFlow( netchan_t *chan ); void Netchan_FragSend( netchan_t *chan ); void Netchan_Clear( netchan_t *chan ); #endif//NET_MSG_H