client | Client tunnel to remote I2P destination (TCP)
server | Generic server tunnel to setup any TCP service in I2P network
server | Generic server tunnel to setup any TCP service in I2P network
http | HTTP server tunnel to setup a website in I2P
irc | IRC server tunnel to setup IRC server in I2P
udpclient | Forwards local UDP endpoint to remote I2P destination
udpserver | Forwards traffic from N I2P destinations to local UDP endpoint
udpclient | Forwards local UDP endpoint to remote I2P destination
udpserver | Forwards traffic from N I2P destinations to local UDP endpoint
socks | Custom Socks proxy service to use I2P with
httpproxy | Custom HTTP proxy service to use I2P with
@ -82,22 +82,25 @@ Each client tunnel must contain a few mandatory parameters, along with some opti
@@ -82,22 +82,25 @@ Each client tunnel must contain a few mandatory parameters, along with some opti
Here is an example of a client tunnel:
[irc-out]
type = client
address = 127.0.0.1
port = 6668
destination = irc.ilita.i2p
keys = irc.dat
```ini
[irc-out]
type = client
address = 127.0.0.1
port = 6668
destination = irc.ilita.i2p
keys = irc.dat
```
If *keys* is empty, transient keys will be created on every restart. If the keys file is not found, new keys will be created and stored into the specified file.
If *keys* starts from *transient*, new keys will be created, but not stored into a file.
If *keys* is empty, transient keys will be created on every restart. If the keys file is not found, new keys will be created and stored into the specified file.
If *keys* starts from *transient*, new keys will be created, but not stored into a file.
Client tunnels might share the same local destination, if the keys file contains the same identity.
Optional parameters:
Option | Description
--------------------|--------------------
address | local interface tunnel binds to, '127.0.0.1' for connections from local host only, '0.0.0.0' for connections from everywhere. '127.0.0.1' by default.
address | local interface tunnel binds to, '127.0.0.1' for connections from local host only, '0.0.0.0' for connections from everywhere. '127.0.0.1' by default
signaturetype | signature type for new keys. 0 (DSA), 1 (ECDSA-P256), 7 (EDDSA), 11 (RedDSA). RSA signatures (4,5,6) are not allowed and will be changed to 7. 7 by default
cryptotype | crypto type for new keys. Experimental. Should be always 0
destinationport | connect to particular port at destination. 0 by default (targeting first tunnel on server side for destination)
@ -112,26 +115,32 @@ Mnemonic: we serving some service to others in network
@@ -112,26 +115,32 @@ Mnemonic: we serving some service to others in network
Here is an example of a server tunnel:
[smtp-in]
type = server
host = 127.0.0.1
port = 25
keys = smtp-in.dat
```ini
[smtp-in]
type = server
host = 127.0.0.1
port = 25
keys = smtp-in.dat
```
If *keys* is empty, transient keys will be created on every restart. If the *keys* file is not found, new keys will be created and stored into the specified file.
The file in *keys* must be present, and the LeaseSet of address from keys file will be published.
The server tunnel must use its own local destination such as host 127.0.0.1 and port 80.
Destination address from *keys* file will be loaded and the LeaseSet of address will be published.
The server tunnel must use its own destination such as host 127.0.0.1 and port 80.
This tunnel type should be used for any protocol other than HTTP, even HTTP with SSL encryption (HTTPS).
Optional parameters:
Option | Description
--------------------|--------------------
inport | what port at local destination server tunnel listens to. Same as *port* by default.
accesslist | list of comma-separated of b32 address (without .b32.i2p) allowed to connect. Everybody is allowed by default.
gzip | turns internal compression off if set to false. true by default.
signaturetype | means signature type for new keys. 0 - DSA, 1- ECDSA-P256, 7 -EDDSA, 11 -RedDSA. 7 by default.
cryptotype | crypto type for new keys. Experimental. Should be always 0.
enableuniquelocal | if true, connection to local address will look like 127.x.x.x where x.x.x is first 3 bytes of incoming connection peer's ident hash. true by default.
address | IP address of an interface tunnel is connected to host from. Usually not used.
inport | what port at local destination server tunnel listens to. Same as *port* by default
accesslist | list of comma-separated of b32 address (without .b32.i2p) allowed to connect. Everybody is allowed by default
gzip | turns internal compression off if set to false. true by default
signaturetype | means signature type for new keys. 0 - DSA, 1- ECDSA-P256, 7 -EDDSA, 11 -RedDSA. 7 by default
cryptotype | crypto type for new keys. Experimental. Should be always 0
enableuniquelocal | if true, connection to local address will look like 127.x.x.x where x.x.x is first 3 bytes of incoming connection peer's ident hash. true by default
address | IP address of an interface tunnel is connected to *host* from. Usually not used
Server/http tunnels
-------------------
@ -141,11 +150,13 @@ must be assigned to the address provided in configuration. i2pd will also resolv
@@ -141,11 +150,13 @@ must be assigned to the address provided in configuration. i2pd will also resolv
Here's an example of an http tunnel:
[http-in]
type = http
host = 127.0.0.1
port = 80
keys = our-website.dat
```ini
[http-in]
type = http
host = 127.0.0.1
port = 80
keys = our-website.dat
```
Optional parameters:
@ -158,8 +169,7 @@ ssl | use SSL connection to upstream server. `hostoverride` para
@@ -158,8 +169,7 @@ ssl | use SSL connection to upstream server. `hostoverride` para
Server/IRC tunnels
-------------------
IRC tunnels are supposed to connect to an IRC server through WEBIRC.
It replaces IP address (usually 127.0.0.1) to user's .b32 I2P address.
IRC tunnels are supposed to connect to an IRC server through WEBIRC. It replaces IP address (usually 127.0.0.1) to user's .b32 I2P address.
Optional parameters:
@ -175,34 +185,36 @@ There are 2 types of UDP tunnels: `udpclient` and `udpserver`
@@ -175,34 +185,36 @@ There are 2 types of UDP tunnels: `udpclient` and `udpserver`
`udpclient` forwards 1 local UDP endpoint to 1 remote I2P destination
[openvpn-client-simple]
type = udpclient
destination = something.b32.i2p
port = 1194
```ini
[openvpn-client-simple]
type = udpclient
destination = something.b32.i2p
port = 1194
```
Option | Description
--------------------|--------------------
destination | the I2P destination of a udpserver tunnel, required parameter
address | IP address to bind local UDP endpoint to, defaults to `127.0.0.1`
port | port to bind local UDP endpoint to, required parameter
gzip | turns internal compression off if set to false. true by default.
gzip | turns internal compression off if set to false. true by default
`udpserver` forwards traffic from N I2P destinations to 1 local UDP endpoint
[openvpn-simple-server]
type = udpserver
keys = openvpn.dat
host = 127.0.0.1
port = 1194
```ini
[openvpn-simple-server]
type = udpserver
keys = openvpn.dat
host = 127.0.0.1
port = 1194
```
Option | Description
--------------------|--------------------
address | IP address to use for local UDP endpoints, defaults to `127.0.0.1`
host | IP address to forward traffic to, required parameter.
host | IP address to forward traffic to, required parameter
port | UDP port to forward traffic on, required parameter
gzip | turns internal compression off if set to false. true by default.
gzip | turns internal compression off if set to false. true by default
Socks proxy
-----------
@ -211,18 +223,19 @@ The SOCKS proxy interface can be defined in ``tunnels.conf``.
@@ -211,18 +223,19 @@ The SOCKS proxy interface can be defined in ``tunnels.conf``.
Here's an example of a Socks proxy:
[alt-socks]
type = socks
address = 127.0.0.1
port = 14447
keys = socks-keys.dat
```ini
[alt-socks]
type = socks
address = 127.0.0.1
port = 14447
keys = socks-keys.dat
```
Option | Description
--------------------|--------------------
address | local address Socks proxy binds to, defaults to `127.0.0.1`
port | TCP port Socks proxy binds to
I2CP parameters
---------------
@ -239,53 +252,54 @@ outbound.lengthVariance | random number of hops to add or subtract to an o
@@ -239,53 +252,54 @@ outbound.lengthVariance | random number of hops to add or subtract to an o
crypto.tagsToSend | number of ElGamal/AES tags to send. 40 by default; too low value may cause problems with tunnel building
explicitPeers | list of comma-separated b64 addresses of peers to use, default: unset
i2p.streaming.initialAckDelay | milliseconds to wait before sending Ack. 200 by default
i2p.streaming.answerPings | enable sending pongs. true by default
i2p.streaming.answerPings | enable sending pongs. true by default
i2cp.leaseSetType | type of LeaseSet to be sent. 1, 3 or 5. 1 by default
i2cp.leaseSetEncType | comma separated encryption types to be used in LeaseSet type 3 or 5. Identity's type by default
i2cp.leaseSetPrivKey | decryption key for encrypted LeaseSet in base64. PSK or private DH
i2cp.leaseSetAuthType | authentication type for encrypted LeaseSet. 0 - no authentication(default), 1 - DH, 2 - PSK
i2cp.leaseSetClient.dh.nnn | client name:client's public DH in base64, for authentication type 1, nnn is integer
i2cp.leaseSetClient.psk.nnn | client name:client's PSK in base64, for authentication type 2, nnn is integer
i2cp.leaseSetPrivKey | decryption key for encrypted LeaseSet in base64. PSK or private DH
i2cp.leaseSetAuthType | authentication type for encrypted LeaseSet. 0 - no authentication(default), 1 - DH, 2 - PSK
i2cp.leaseSetClient.dh.nnn | client name:client's public DH in base64, for authentication type 1, nnn is integer
i2cp.leaseSetClient.psk.nnn | client name:client's PSK in base64, for authentication type 2, nnn is integer
Other examples
--------------
# outgoing tunnel sample, to remote service
# mandatory parameters:
# * type -- always "client"
# * port -- local port to listen to
# * destination -- I2P hostname
# optional parameters (may be omitted)
# * keys -- our identity, if unset, will be generated on every startup,
# if set and file missing, keys will be generated and placed to this file
# * address -- local interface to bind
# * signaturetype -- signature type for new destination. 0 (DSA/SHA1), 1 (EcDSA/SHA256) or 7 (EdDSA/SHA512)
[IRC]
type = client
address = 127.0.0.1
port = 6668
destination = irc.ilita.i2p
keys = irc-keys.dat
#
# incoming tunnel sample, for local service
# mandatory parameters:
# * type -- "server" or "http"
# * host -- IP address of our service
# * port -- port of our service
# * keys -- file with LeaseSet of address in i2p
# optional parameters (may be omitted)
# * inport -- optional, I2P service port, if unset - the same as 'port'
# * accesslist -- comma-separated list of I2P addresses, allowed to connect
# every address is b32 without '.b32.i2p' part
[LOCALSITE]
type = http
host = 127.0.0.1
port = 80
keys = site-keys.dat
#
[IRC-SERVER]
type = server
host = 127.0.0.1
port = 6667
keys = irc.dat
```ini
# outgoing tunnel sample, to remote service
# mandatory parameters:
# * type -- always "client"
# * port -- local port to listen to
# * destination -- I2P hostname
# optional parameters (may be omitted)
# * keys -- our identity, if unset, will be generated on every startup,
# if set and file missing, keys will be generated and placed to this file
# * address -- local interface to bind
# * signaturetype -- signature type for new destination. 0 (DSA/SHA1), 1 (EcDSA/SHA256) or 7 (EdDSA/SHA512)
[IRC]
type = client
address = 127.0.0.1
port = 6668
destination = irc.ilita.i2p
keys = irc-keys.dat
#
# incoming tunnel sample, for local service
# mandatory parameters:
# * type -- "server" or "http"
# * host -- IP address of our service
# * port -- port of our service
# * keys -- file with LeaseSet of address in i2p
# optional parameters (may be omitted)
# * inport -- optional, I2P service port, if unset - the same as 'port'
# * accesslist -- comma-separated list of I2P addresses, allowed to connect
R4SAS
2 years ago
committed by