tunnels.conf is designed to support multiple I2P tunnels. Must be located in ``~/.i2pd`` (per-user) or ``/var/lib/i2pd`` (system-wide).
This file uses .ini file format. It consists of multiple sections with unique name each.
Section type is specified by *type* parameter with possible values *client*, *server* or *http*. Each *client* specifies I2P client tunnel and each *server* specifies I2P server tunnel. *http* is special type of server tunnel for eepsites.
Client tunnels
--------------
Mnemonic: we can connect to someone as client
Must contain few mandatory parameters, some optional parameters might be also presented.
Example of client tunnel:
[irc-out]
type = client
address = 127.0.0.1
port = 6668
destination = irc.echelon.i2p
keys = irc.dat
If *keys* is empty, transient keys will be created on every restart. If keys file is not found, new keys will be created and stored into specified file.
Client tunnels might share same local destination, if keys file contains same identity.
Optional parameters:
* address -- local interface tunnel binds to, '127.0.0.1' for connections from local host only, '0.0.0.0' for connections from everywhere. '127.0.0.1' by default.
* signaturetype -- signature type for new keys. 0 (DSA), 1 (ECDSA-P256), 7 (EDDSA). 1 by default
* destinationport -- connect to particular port at destination. 0 by default
So, with example above, if you telnet to 127.0.0.1:6668 on localhost, i2pd will connect to irc.echelon.i2p:6668
Server/generic tunnels
----------------------
Mnemonic: we serving some service to others in network
Example of server tunnel:
[smtp-in]
type = server
host = 127.0.0.1
port = 25
keys = smtp-in.dat
*keys* must be presented, LeaseSet of address from keys file will be published. Server tunnel must use its own local destination.
Optional parameters:
* inport -- what port at local destination server tunnel listens to. Same as *port* by default.
* accesslist -- list of comma-separated of b32 address (without .b32.i2p) allowed to connect. Everybody is allowed by default.
* gzip -- turns internal compression off if set to false. true by default.
* signaturetype -- means signature type for new keys. 0 - DSA, 1- ECDSA-P256, 7 -EDDSA. 1 by default.
* enableuniquelocal -- if true, connection to local address will look like 127.x.x.x where x.x.x is first 3 bytes of incoming connection peer's ident hash. true by default.
Server/http tunnels
-------------------
*http* tunnel works same way as server tunnel, but replace 'Host:' field in HTTP header to address provided in configuration.
Also resolves it if necessary.
Example of http tunnel:
[http-in]
type = http
host = ourwebsite.com
port = 80
keys = our-website.dat
Optional parameters:
* hostoverride -- value to send in 'Host:' header, default: the same as *host* parameter
* gzip -- should we compress contents at i2p level. default: true
Server/IRC tunnels
-------------------
IRC tunnels are supposed to connect to an IRC server through WEBIRC.
It replaces IP address (usually 127.0.0.1) to user's .b32 I2P address.
Optional parameters:
* webircpassword -- password to send with WEBIRC command
UDP Tunnels
-----------
There are 2 types of UDP tunnels: `udpclient` and `udpserver`
`udpclient` forwards 1 local udp endpoint to 1 remote i2p destination
[openvpn-client-simple]
type = udpclient
destination = something.b32.i2p
port = 1194
* destination -- the i2p destination of a udpserver tunnel, required parameter
* address -- ip address to bind local udp endpoint to, defaults to `127.0.0.1`
* port -- port to bind local udp endpoint to, required parameter
`udpserver` forwards traffic from N i2p destinations to 1 local udp endpoint
[openvpn-simple-server]
type = udpserver
keys = openvpn.dat
port = 1194
* address -- ip address to use for local udp endpoints, defaults to `127.0.0.1`
* host -- ip address to forward traffic to, defaults to `127.0.0.1`
* port -- udp port to forward traffic on, required parameter
