i2pd_docs_en/docs/user-guide/configuration.md

i2pd configuration
==================

i2pd can be configured via either command-line arguments or config files. 
Modifying `i2pd.conf` is just a way of passing command line arguments to i2pd at boot; 
for example, running i2pd with argument `--port=10123` and setting option `port = 10123` in config file will have 
the same effect.

There are two separate config files: `i2pd.conf` and `tunnels.conf`. `i2pd.conf` is the main configuration file, where
you configure all options. `tunnels.conf` is the tunnel configuration file, where you configure I2P hidden services
and client tunnels. the `tunnels.conf` options are documented [here](tunnels.md).

`i2pd.conf` accets INI-like syntax, such as the following : <key> = <value>.
Comments are "#", not ";" as you might expect. See [boost ticket](https://svn.boost.org/trac/boost/ticket/808)
All command-line parameters are allowed as keys, but for those which contains dot (.), there is a special syntax.

For example:

i2pd.conf:

    # comment
    log = true
    ipv6 = true
    # settings for specific module
    [httpproxy]
    port = 4444
    # ^^ this will be --httproxy.port= in cmdline
    # another comment
    [sam]
    enabled = true

You are also encouraged to see the commented config with examples of all options in ``contrib/i2pd.conf``.

Options specified on the command line take precedence over those in the config file.
If you are upgrading your very old router (< 2.3.0) see also [this](config_opts_after_2.3.0.md) page.

Available options
-----------------


Run `./i2pd --help` to show builtin help message (default value of option will be shown in braces)

### General options

Option                                 | Description
-------------------------------------- | --------------------------------------
conf                                   | Config file (default: ~/.i2pd/i2pd.conf or /var/lib/i2pd/i2pd.conf). This parameter will be silently ignored if the specified config file does not exist.
tunconf                                | Tunnels config file (default: ~/.i2pd/tunnels.conf or /var/lib/i2pd/tunnels.conf)
pidfile                                | Where to write pidfile (dont write by default)
log                                    | Logs destination: stdout, file, syslog (stdout if not set, file - otherwise, for compatibility)
logfile                                | Path to logfile (default - autodetect)
loglevel                               | Log messages above this level (debug, info, warn, error, none; default - info)
logclftime                             | Write full CLF-formatted date and time to log (default: write only time)
datadir                                | Path to storage of i2pd data (RI, keys, peer profiles, ...)
host                                   | Router external IP for incoming connections
port                                   | Port to listen for incoming connections (default: auto)
daemon                                 | Router will go to background after start
service                                | Router will use system folders like '/var/lib/i2pd'
ifname                                 | Network interface to bind to
ifname4                                | Network interface to bind to for IPv4
ifname6                                | Network interface to bind to for IPv6
nat                                    | If true, assume we are behind NAT. true by default
ipv4                                   | Enable communication through IPv4. true by default
ipv6                                   | Enable communication through IPv6. false by default
notransit                              | Router will not accept transit tunnels, disabling transit traffic completely. false by default
floodfill                              | Router will be floodfill. false by default
bandwidth                              | Bandwidth limit: integer in KBps or letters: L (32), O (256), P (2048), X (>9000)
share                                  | Max % of bandwidth limit for transit. 0-100. 100 by default
family                                 | Name of a family, router belongs to
netid                                  | Network ID, router belongs to. Main I2P is 2.
ssu                                    | Enable SSU transport protocol (use UDP). true by default
ntcp                                   | Enable NTCP transport protocol (use TCP). true by default
ntcpproxy                              | Specify proxy server for NTCP. Should be http://address:port or socks://address:port 

#### Notes

`datadir` and `service` options are only used as arguments for i2pd, these options have no effect when set in `i2pd.conf`.

### Windows-specific options

Option                                 | Description
-------------------------------------- | --------------------------------------
svcctl                                 | Windows service management (--svcctl="install" or --svcctl="remove")
insomnia                               | Prevent system from sleeping
close                                  | Action on close: minimize, exit, ask

All options below still possible in cmdline, but better write it in config file:

### HTTP webconsole

Option                                 | Description
-------------------------------------- | --------------------------------------
http.enabled                           | If webconsole is enabled. true by default  
http.address                           | The address to listen on (HTTP server)
http.port                              | The port to listen on (HTTP server) 7070 by default
http.auth                              | Enable basic HTTP auth for webconsole
http.user                              | Username for basic auth (default: i2pd)
http.pass                              | Password for basic auth (default: random, see logs)
http.strictheaders                     | Enable strict host checking on WebUI. true by default
http.hostname                          | Expected hostname for WebUI (default: localhost)

### HTTP proxy

Option                                 | Description
-------------------------------------- | --------------------------------------
httpproxy.enabled                      | If HTTP proxy is enabled. true by default  
httpproxy.address                      | The address to listen on (HTTP Proxy)  
httpproxy.port                         | The port to listen on (HTTP Proxy) 4444 by default 
httpproxy.addresshelper                | Enable address helper (jump). true by default  
httpproxy.keys                         | Optional keys file for HTTP proxy local destination  
httpproxy.signaturetype                | Signature type for new keys if keys file is set. 7 by default
httpproxy.inbound.length               | Inbound tunnels length if keys is set. 3 by default  
httpproxy.inbound.quantity             | Inbound tunnels quantity if keys is set. 5 by default  
httpproxy.outbound.length              | Outbound tunnels length if keys is set. 3 by default  
httpproxy.outbound.quantity            | Outbound tunnels quantity if keys is set. 5 by default    
httpproxy.outproxy                     | HTTP proxy upstream out proxy url (like http://false.i2p)  

### Socks proxy

Option                                 | Description
-------------------------------------- | --------------------------------------
socksproxy.enabled                     | If SOCKS proxy is enabled. true by default  
socksproxy.address                     | The address to listen on (SOCKS Proxy)  
socksproxy.port                        | The port to listen on (SOCKS Proxy). 4447 by default  
socksproxy.keys                        | Optional keys file for SOCKS proxy local destination  
socksproxy.signaturetype               | Signature type for new keys if keys file is set. 7 by default
socksproxy.inbound.length              | Inbound tunnels length if keys is set. 3 by default  
socksproxy.inbound.quantity            | Inbound tunnels quantity if keys is set. 5 by default  
socksproxy.outbound.length             | Outbound tunnels length if keys is set. 3 by default  
socksproxy.outbound.quantity           | Outbound tunnels quantity if keys is set. 5 by default  
socksproxy.outproxy                    | Address of outproxy. requests outside I2P will go there  
socksproxy.outproxyport                | Outproxy remote port  

### SAM interface

Option                                 | Description
-------------------------------------- | --------------------------------------
sam.address                            | The address to listen on (SAM bridge)
sam.port                               | Port of SAM bridge. Usually 7656. SAM is off if not specified
sam.enabled                            | If SAM is enabled. true by default 

### BOB interface

Option                                 | Description
-------------------------------------- | --------------------------------------
bob.address                            | The address to listen on (BOB command channel)
bob.port                               | Port of BOB command channel. Usually 2827. BOB is off if not specified
bob.enabled                            | If BOB is enabled. false by default 

### I2CP interface

Option                                 | Description
-------------------------------------- | --------------------------------------
i2cp.address                           | The address to listen on or an abstract address for Android LocalSocket
i2cp.port                              | Port of I2CP server. Usually 7654. Ignored for Andorid
i2cp.enabled                           | If I2CP is enabled. false by default. Other services don't require I2CP 

### I2PControl interface

Option                                 | Description
-------------------------------------- | --------------------------------------
i2pcontrol.address                     | The address to listen on (I2P control service)  
i2pcontrol.port                        | Port of I2P control service. Usually 7650. I2PControl is off if not specified  
i2pcontrol.enabled                     | If I2P control is enabled. false by default  
i2pcontrol.password                    | I2P control authentication password. itoopie by default  
i2pcontrol.cert                        | I2P control HTTPS certificate file name. i2pcontrol.crt.pem by default  
i2pcontrol.key                         | I2P control HTTPS certificate key file name. i2pcontrol.key.pem by default  

### UPNP

Option                                 | Description
-------------------------------------- | --------------------------------------
upnp.enabled                           | Enable or disable UPnP, false by default for CLI and true for GUI (Windows, Android)  
upnp.name                              | Name i2pd appears in UPnP forwardings list. I2Pd by default  

### Cryptography

Option                                 | Description
-------------------------------------- | --------------------------------------
precomputation.elgamal                 | Use ElGamal precomputated tables. false for x64 and true for other platforms by default  

### Reseeding

Option                                 | Description
-------------------------------------- | --------------------------------------
reseed.verify                          | Verify .su3 signature. fase by default 
reseed.urls                            | Reseed URLs, separated by comma
reseed.file                            | Path to local .su3 file or HTTPS URL to reseed from
reseed.zipfile                         | Path to local .zip file to reseed from
reseed.threshold                       | Minimum number of known routers before requesting reseed. 25 by default
reseed.proxy                           | Url for https/socks reseed proxy  

### Addressbook options

Option                                 | Description
-------------------------------------- | --------------------------------------
addressbook.defaulturl                 | AddressBook subscription URL for initial setup
addressbook.subscriptions              | AddressBook subscriptions URLs, separated by comma

### Limits

Option                                 | Description
-------------------------------------- | --------------------------------------
limits.transittunnels                  | Override maximum number of transit tunnels. 2500 by default   
limits.openfiles                       | Limit number of open file descriptors (0 - use system limit)  
limits.coresize                        | Maximum size of corefile in Kb (0 - use system limit) 
limits.ntcpsoft                        | Threshold to start probabalistic backoff with ntcp sessions (0 - use system limit) 
limits.ntcphard                        | Maximum number of ntcp sessions (0 - use system limit) 

### Trust options

Option                                 | Description
-------------------------------------- | --------------------------------------
trust.enabled                          | Enable explicit trust options. false by default
trust.family                           | Make direct I2P connections only to routers in specified Family.
trust.routers                          | Make direct I2P connections only to routers specified here. Comma separated list of base64 identities.
trust.hidden                           | Should we hide our router from other routers? false by default

### Websocket server

Option                                 | Description
-------------------------------------- | --------------------------------------
websockets.enabled                     | Enable websocket server. Disabled by default
websockets.address                     | Address to bind websocket server on. 127.0.0.1 by default
websockets.port                        | Port to bind websocket server on. 7666 by default

### Exploratory tunnels

Option                                 | Description
-------------------------------------- | --------------------------------------
exploratory.inbound.length             | Exploratory inbound tunnels length. 2 by default
exploratory.inbound.quantity           | Exploratory inbound tunnels quantity. 3 by default
exploratory.outbound.length            | Exploratory outbound tunnels length. 2 by default
exploratory.outbound.quantity          | Exploratory outbound tunnels length. 3 by default

### NTCP2

Option                                 | Description
-------------------------------------- | --------------------------------------
ntcp2.enabled                          | Enable NTCP2. Enabled by default
ntcp2.published                        | Enable incoming NTCP2 connections. Disabled by default
ntcp2.port                             | Port to listen for incoming NTCP2 connections (default: auto)

### Time sync

Option                                 | Description
-------------------------------------- | --------------------------------------
nettime.enabled                        | Enable NTP sync. Disabled by default
nettime.ntpservers                     | Comma-separated list of NTP server. pool.ntp.org by default
nettime.ntpsyncinterval                | NTP time sync interval in hours. 72 by default

### Network information persist

Option                                 | Description
-------------------------------------- | --------------------------------------
persist.profiles                       | Enable peer profile persisting to disk. Enabled by default

Local addressbook
-----------------

There is also a special addressbook config file in the working directory at `addressbook/local.csv`.
It is used to map long I2P destinations to short, human readable domain names. The syntax is csv and
it can be modified manually if the user wishes.
Migrate old docs 8 years ago			`i2pd configuration`
			`==================`

Fix grammar and and wording in user-guide. 7 years ago			`i2pd can be configured via either command-line arguments or config files.`
			Modifying `i2pd.conf` is just a way of passing command line arguments to i2pd at boot;
			for example, running i2pd with argument `--port=10123` and setting option `port = 10123` in config file will have
			`the same effect.`
Migrate old docs 8 years ago
Fix grammar and and wording in user-guide. 7 years ago			There are two separate config files: `i2pd.conf` and `tunnels.conf`. `i2pd.conf` is the main configuration file, where
			you configure all options. `tunnels.conf` is the tunnel configuration file, where you configure I2P hidden services
			and client tunnels. the `tunnels.conf` options are documented [here](tunnels.md).
Migrate old docs 8 years ago
Fix grammar and and wording in user-guide. 7 years ago			`i2pd.conf` accets INI-like syntax, such as the following : <key> = <value>.
			`Comments are "#", not ";" as you might expect. See [boost ticket](https://svn.boost.org/trac/boost/ticket/808)`
			`All command-line parameters are allowed as keys, but for those which contains dot (.), there is a special syntax.`
Migrate old docs 8 years ago
			`For example:`

			`i2pd.conf:`

			`# comment`
			`log = true`
			`ipv6 = true`
			`# settings for specific module`
			`[httpproxy]`
			`port = 4444`
			`# ^^ this will be --httproxy.port= in cmdline`
			`# another comment`
			`[sam]`
			`enabled = true`

Fix grammar and and wording in user-guide. 7 years ago			You are also encouraged to see the commented config with examples of all options in ``contrib/i2pd.conf``.
Migrate old docs 8 years ago
			`Options specified on the command line take precedence over those in the config file.`
			`If you are upgrading your very old router (< 2.3.0) see also [this](config_opts_after_2.3.0.md) page.`

			`Available options`
			`-----------------`


			Run `./i2pd --help` to show builtin help message (default value of option will be shown in braces)

			`### General options`

Prettify table 8 years ago			`Option \| Description`
			`-------------------------------------- \| --------------------------------------`
			`conf \| Config file (default: ~/.i2pd/i2pd.conf or /var/lib/i2pd/i2pd.conf). This parameter will be silently ignored if the specified config file does not exist.`
			`tunconf \| Tunnels config file (default: ~/.i2pd/tunnels.conf or /var/lib/i2pd/tunnels.conf)`
			`pidfile \| Where to write pidfile (dont write by default)`
fix #4 and fix #9 7 years ago			`log \| Logs destination: stdout, file, syslog (stdout if not set, file - otherwise, for compatibility)`
Prettify table 8 years ago			`logfile \| Path to logfile (default - autodetect)`
Update configuration.md 7 years ago			`loglevel \| Log messages above this level (debug, info, warn, error, none; default - info)`
add logclftime option description 7 years ago			`logclftime \| Write full CLF-formatted date and time to log (default: write only time)`
Prettify table 8 years ago			`datadir \| Path to storage of i2pd data (RI, keys, peer profiles, ...)`
			`host \| Router external IP for incoming connections`
			`port \| Port to listen for incoming connections (default: auto)`
			`daemon \| Router will go to background after start`
			`service \| Router will use system folders like '/var/lib/i2pd'`
add missing options 7 years ago			`ifname \| Network interface to bind to`
			`ifname4 \| Network interface to bind to for IPv4`
			`ifname6 \| Network interface to bind to for IPv6`
			`nat \| If true, assume we are behind NAT. true by default`
			`ipv4 \| Enable communication through IPv4. true by default`
			`ipv6 \| Enable communication through IPv6. false by default`
fix notransit description 8 years ago			`notransit \| Router will not accept transit tunnels, disabling transit traffic completely. false by default`
Prettify table 8 years ago			`floodfill \| Router will be floodfill. false by default`
			`bandwidth \| Bandwidth limit: integer in KBps or letters: L (32), O (256), P (2048), X (>9000)`
'share' added 8 years ago			`share \| Max % of bandwidth limit for transit. 0-100. 100 by default`
Prettify table 8 years ago			`family \| Name of a family, router belongs to`
			`netid \| Network ID, router belongs to. Main I2P is 2.`
add missing options 7 years ago			`ssu \| Enable SSU transport protocol (use UDP). true by default`
			`ntcp \| Enable NTCP transport protocol (use TCP). true by default`
ntcpproxy added 8 years ago			`ntcpproxy \| Specify proxy server for NTCP. Should be http://address:port or socks://address:port`
Migrate old docs 8 years ago
Note about datadir and service options 7 years ago			`#### Notes`

			`datadir` and `service` options are only used as arguments for i2pd, these options have no effect when set in `i2pd.conf`.

Migrate old docs 8 years ago			`### Windows-specific options`

Prettify table 8 years ago			`Option \| Description`
			`-------------------------------------- \| --------------------------------------`
			`svcctl \| Windows service management (--svcctl="install" or --svcctl="remove")`
			`insomnia \| Prevent system from sleeping`
			`close \| Action on close: minimize, exit, ask`
Migrate old docs 8 years ago
			`All options below still possible in cmdline, but better write it in config file:`

			`### HTTP webconsole`

Prettify table 8 years ago			`Option \| Description`
			`-------------------------------------- \| --------------------------------------`
			`http.enabled \| If webconsole is enabled. true by default`
			`http.address \| The address to listen on (HTTP server)`
			`http.port \| The port to listen on (HTTP server) 7070 by default`
			`http.auth \| Enable basic HTTP auth for webconsole`
			`http.user \| Username for basic auth (default: i2pd)`
			`http.pass \| Password for basic auth (default: random, see logs)`
Update configuration.md Add description for http.strictheaders and http.hostname. 6 years ago			`http.strictheaders \| Enable strict host checking on WebUI. true by default`
			`http.hostname \| Expected hostname for WebUI (default: localhost)`
Migrate old docs 8 years ago
			`### HTTP proxy`

Prettify table 8 years ago			`Option \| Description`
			`-------------------------------------- \| --------------------------------------`
			`httpproxy.enabled \| If HTTP proxy is enabled. true by default`
			`httpproxy.address \| The address to listen on (HTTP Proxy)`
httpproxy.addresshelper 8 years ago			`httpproxy.port \| The port to listen on (HTTP Proxy) 4444 by default`
Update configuration.md 7 years ago			`httpproxy.addresshelper \| Enable address helper (jump). true by default`
			`httpproxy.keys \| Optional keys file for HTTP proxy local destination`
			`httpproxy.signaturetype \| Signature type for new keys if keys file is set. 7 by default`
Prettify table 8 years ago			`httpproxy.inbound.length \| Inbound tunnels length if keys is set. 3 by default`
			`httpproxy.inbound.quantity \| Inbound tunnels quantity if keys is set. 5 by default`
			`httpproxy.outbound.length \| Outbound tunnels length if keys is set. 3 by default`
			`httpproxy.outbound.quantity \| Outbound tunnels quantity if keys is set. 5 by default`
http.outproxy added 7 years ago			`httpproxy.outproxy \| HTTP proxy upstream out proxy url (like http://false.i2p)`
Migrate old docs 8 years ago
			`### Socks proxy`

Prettify table 8 years ago			`Option \| Description`
			`-------------------------------------- \| --------------------------------------`
			`socksproxy.enabled \| If SOCKS proxy is enabled. true by default`
			`socksproxy.address \| The address to listen on (SOCKS Proxy)`
			`socksproxy.port \| The port to listen on (SOCKS Proxy). 4447 by default`
Update configuration.md 7 years ago			`socksproxy.keys \| Optional keys file for SOCKS proxy local destination`
			`socksproxy.signaturetype \| Signature type for new keys if keys file is set. 7 by default`
Prettify table 8 years ago			`socksproxy.inbound.length \| Inbound tunnels length if keys is set. 3 by default`
			`socksproxy.inbound.quantity \| Inbound tunnels quantity if keys is set. 5 by default`
			`socksproxy.outbound.length \| Outbound tunnels length if keys is set. 3 by default`
			`socksproxy.outbound.quantity \| Outbound tunnels quantity if keys is set. 5 by default`
fix upper/lower case 7 years ago			`socksproxy.outproxy \| Address of outproxy. requests outside I2P will go there`
Prettify table 8 years ago			`socksproxy.outproxyport \| Outproxy remote port`
Migrate old docs 8 years ago
			`### SAM interface`

Prettify table 8 years ago			`Option \| Description`
			`-------------------------------------- \| --------------------------------------`
			`sam.address \| The address to listen on (SAM bridge)`
			`sam.port \| Port of SAM bridge. Usually 7656. SAM is off if not specified`
Update configuration.md 8 years ago			`sam.enabled \| If SAM is enabled. true by default`
Migrate old docs 8 years ago
			`### BOB interface`

Prettify table 8 years ago			`Option \| Description`
			`-------------------------------------- \| --------------------------------------`
			`bob.address \| The address to listen on (BOB command channel)`
			`bob.port \| Port of BOB command channel. Usually 2827. BOB is off if not specified`
			`bob.enabled \| If BOB is enabled. false by default`
Migrate old docs 8 years ago
			`### I2CP interface`

Prettify table 8 years ago			`Option \| Description`
			`-------------------------------------- \| --------------------------------------`
			`i2cp.address \| The address to listen on or an abstract address for Android LocalSocket`
			`i2cp.port \| Port of I2CP server. Usually 7654. Ignored for Andorid`
			`i2cp.enabled \| If I2CP is enabled. false by default. Other services don't require I2CP`
Migrate old docs 8 years ago
			`### I2PControl interface`

Prettify table 8 years ago			`Option \| Description`
			`-------------------------------------- \| --------------------------------------`
			`i2pcontrol.address \| The address to listen on (I2P control service)`
			`i2pcontrol.port \| Port of I2P control service. Usually 7650. I2PControl is off if not specified`
			`i2pcontrol.enabled \| If I2P control is enabled. false by default`
			`i2pcontrol.password \| I2P control authentication password. itoopie by default`
			`i2pcontrol.cert \| I2P control HTTPS certificate file name. i2pcontrol.crt.pem by default`
			`i2pcontrol.key \| I2P control HTTPS certificate key file name. i2pcontrol.key.pem by default`
Migrate old docs 8 years ago
			`### UPNP`

Prettify table 8 years ago			`Option \| Description`
			`-------------------------------------- \| --------------------------------------`
			`upnp.enabled \| Enable or disable UPnP, false by default for CLI and true for GUI (Windows, Android)`
			`upnp.name \| Name i2pd appears in UPnP forwardings list. I2Pd by default`
Migrate old docs 8 years ago
			`### Cryptography`

Prettify table 8 years ago			`Option \| Description`
			`-------------------------------------- \| --------------------------------------`
			`precomputation.elgamal \| Use ElGamal precomputated tables. false for x64 and true for other platforms by default`
Migrate old docs 8 years ago
			`### Reseeding`

Prettify table 8 years ago			`Option \| Description`
			`-------------------------------------- \| --------------------------------------`
add missing options 7 years ago			`reseed.verify \| Verify .su3 signature. fase by default`
Prettify table 8 years ago			`reseed.urls \| Reseed URLs, separated by comma`
add missing options 7 years ago			`reseed.file \| Path to local .su3 file or HTTPS URL to reseed from`
			`reseed.zipfile \| Path to local .zip file to reseed from`
			`reseed.threshold \| Minimum number of known routers before requesting reseed. 25 by default`
Ressed proxy 7 years ago			`reseed.proxy \| Url for https/socks reseed proxy`
Migrate old docs 8 years ago
			`### Addressbook options`

Prettify table 8 years ago			`Option \| Description`
			`-------------------------------------- \| --------------------------------------`
			`addressbook.defaulturl \| AddressBook subscription URL for initial setup`
			`addressbook.subscriptions \| AddressBook subscriptions URLs, separated by comma`
Migrate old docs 8 years ago
			`### Limits`

Prettify table 8 years ago			`Option \| Description`
			`-------------------------------------- \| --------------------------------------`
			`limits.transittunnels \| Override maximum number of transit tunnels. 2500 by default`
Fix docs 8 years ago			`limits.openfiles \| Limit number of open file descriptors (0 - use system limit)`
ntcp limits 7 years ago			`limits.coresize \| Maximum size of corefile in Kb (0 - use system limit)`
			`limits.ntcpsoft \| Threshold to start probabalistic backoff with ntcp sessions (0 - use system limit)`
			`limits.ntcphard \| Maximum number of ntcp sessions (0 - use system limit)`
Migrate old docs 8 years ago
Documented trust options and websocket server 8 years ago			`### Trust options`

			`Option \| Description`
			`-------------------------------------- \| --------------------------------------`
			`trust.enabled \| Enable explicit trust options. false by default`
			`trust.family \| Make direct I2P connections only to routers in specified Family.`
			`trust.routers \| Make direct I2P connections only to routers specified here. Comma separated list of base64 identities.`
			`trust.hidden \| Should we hide our router from other routers? false by default`

			`### Websocket server`

			`Option \| Description`
			`-------------------------------------- \| --------------------------------------`
			`websockets.enabled \| Enable websocket server. Disabled by default`
			`websockets.address \| Address to bind websocket server on. 127.0.0.1 by default`
			`websockets.port \| Port to bind websocket server on. 7666 by default`

Exploratory config 8 years ago			`### Exploratory tunnels`
Documented trust options and websocket server 8 years ago
Exploratory config 8 years ago			`Option \| Description`
			`-------------------------------------- \| --------------------------------------`
			`exploratory.inbound.length \| Exploratory inbound tunnels length. 2 by default`
			`exploratory.inbound.quantity \| Exploratory inbound tunnels quantity. 3 by default`
			`exploratory.outbound.length \| Exploratory outbound tunnels length. 2 by default`
			`exploratory.outbound.quantity \| Exploratory outbound tunnels length. 3 by default`
Migrate old docs 8 years ago
Time sync 6 years ago			`### NTCP2`
NTCP2 options 6 years ago
			`Option \| Description`
			`-------------------------------------- \| --------------------------------------`
			`ntcp2.enabled \| Enable NTCP2. Enabled by default`
			`ntcp2.published \| Enable incoming NTCP2 connections. Disabled by default`
			`ntcp2.port \| Port to listen for incoming NTCP2 connections (default: auto)`

Time sync 6 years ago			`### Time sync`

			`Option \| Description`
			`-------------------------------------- \| --------------------------------------`
			`nettime.enabled \| Enable NTP sync. Disabled by default`
			`nettime.ntpservers \| Comma-separated list of NTP server. pool.ntp.org by default`
			`nettime.ntpsyncinterval \| NTP time sync interval in hours. 72 by default`

Network information persist 6 years ago			`### Network information persist`

			`Option \| Description`
			`-------------------------------------- \| --------------------------------------`
			`persist.profiles \| Enable peer profile persisting to disk. Enabled by default`
Time sync 6 years ago
Migrate old docs 8 years ago			`Local addressbook`
			`-----------------`

Fix grammar and and wording in user-guide. 7 years ago			There is also a special addressbook config file in the working directory at `addressbook/local.csv`.
			`It is used to map long I2P destinations to short, human readable domain names. The syntax is csv and`
			`it can be modified manually if the user wishes.`
Migrate old docs 8 years ago