I2P: End-to-End encrypted and anonymous Internet https://i2pd.website/
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
 
 
 
 
 

8.1 KiB

i2pd configuration

Command line options

Options specified on the command line take precedence over those in the config file. If you are upgrading your very old router (< 2.3.0) see also this page.

  • --help - Show builtin help message (default value of option will be shown in braces)
  • --conf= - Config file (default: ~/.i2pd/i2pd.conf or /var/lib/i2pd/i2pd.conf) This parameter will be silently ignored if the specified config file does not exist.
  • --tunconf= - Tunnels config file (default: ~/.i2pd/tunnels.conf or /var/lib/i2pd/tunnels.conf)
  • --pidfile= - Where to write pidfile (dont write by default)
  • --log= - Logs destination: stdout, file (stdout if not set, file - otherwise, for compatibility)
  • --logfile= - Path to logfile (default - autodetect)
  • --loglevel= - Log messages above this level (debug, info, warn, error)
  • --datadir= - Path to storage of i2pd data (RI, keys, peer profiles, ...)
  • --host= - Router external IP for incoming connections
  • --port= - Port to listen for incoming connections (default: auto)
  • --daemon - Router will go to background after start
  • --service - Router will use system folders like '/var/lib/i2pd'
  • --ipv6 - Enable communication through ipv6. false by default
  • --notransit - Router will not accept transit tunnels at startup. false by default
  • --floodfill - Router will be floodfill. false by default
  • --bandwidth= - Bandwidth limit: integer in KBps or letters: L (32), O (256), P (2048), X (>9000)
  • --family= - Name of a family, router belongs to
  • --netid= - Network ID, router belongs to. Main I2P is 2.

Windows-specific options:

  • --svcctl= - Windows service management (--svcctl="install" or --svcctl="remove")
  • --insomnia - Prevent system from sleeping
  • --close= - Action on close: minimize, exit, ask

All options below still possible in cmdline, but better write it in config file:

  • --http.address= - The address to listen on (HTTP server)

  • --http.port= - The port to listen on (HTTP server)

  • --http.auth - Enable basic HTTP auth for webconsole

  • --http.user= - Username for basic auth (default: i2pd)

  • --http.pass= - Password for basic auth (default: random, see logs)

  • --httpproxy.enabled= - If HTTP proxy is enabled. true by default

  • --httpproxy.address= - The address to listen on (HTTP Proxy)

  • --httpproxy.port= - The port to listen on (HTTP Proxy) 4444 by default

  • --httpproxy.keys= - optional keys file for HTTP proxy local destination

  • --httpproxy.inbound.length= - Inbound tunnels length if keys is set. 3 by default

  • --httpproxy.inbound.quantity= - Inbound tunnels quantity if keys is set. 5 by default

  • --httpproxy.outbound.length= - Outbound tunnels length if keys is set. 3 by default

  • --httpproxy.outbound.quantity= - Outbound tunnels quantity if keys is set. 5 by default

  • --socksproxy.enabled= - If SOCKS proxy is enabled. true by default

  • --socksproxy.address= - The address to listen on (SOCKS Proxy)

  • --socksproxy.port= - The port to listen on (SOCKS Proxy). 4447 by default

  • --socksproxy.keys= - optional keys file for SOCKS proxy local destination

  • --socksproxy.inbound.length= - Inbound tunnels length if keys is set. 3 by default

  • --socksproxy.inbound.quantity= - Inbound tunnels quantity if keys is set. 5 by default

  • --socksproxy.outbound.length= - Outbound tunnels length if keys is set. 3 by default

  • --socksproxy.outbound.quantity= - Outbound tunnels quantity if keys is set. 5 by default

  • --socksproxy.outproxy= - Address of outproxy. requests outside i2p will go there

  • --socksproxy.outproxyport= - Outproxy remote port

  • --sam.address= - The address to listen on (SAM bridge)

  • --sam.port= - Port of SAM bridge. Usually 7656. SAM is off if not specified

  • --sam.enabled= - If SAM is enabled. false by default

  • --bob.address= - The address to listen on (BOB command channel)

  • --bob.port= - Port of BOB command channel. Usually 2827. BOB is off if not specified

  • --bob.enabled= - If BOB is enabled. false by default

  • --i2cp.address= - The address to listen on or an abstract address for Android LocalSocket

  • --i2cp.port= - Port of I2CP server. Usually 7654. Ignored for Andorid

  • --i2cp.enabled= - If I2CP is enabled. false by default. Other services don't require I2CP

  • --i2pcontrol.address= - The address to listen on (I2P control service)

  • --i2pcontrol.port= - Port of I2P control service. Usually 7650. I2PControl is off if not specified

  • --i2pcontrol.enabled= - If I2P control is enabled. false by default

  • --i2pcontrol.password= - I2P control authentication password. itoopie by default

  • --i2pcontrol.cert= - I2P control HTTPS certificate file name. i2pcontrol.crt.pem by default

  • --i2pcontrol.key= - I2P control HTTPS certificate key file name. i2pcontrol.key.pem by default

  • --upnp.enabled= - Enable or disable UPnP, false by default for CLI and true for GUI (Windows, Android)

  • --upnp.name= - Name i2pd appears in UPnP forwardings list. I2Pd by default

  • --precomputation.elgamal= - Use ElGamal precomputated tables. false for x64 and true for other platforms by default

  • --reseed.verify= - Request SU3 signature verification

  • --reseed.file= - Full path to SU3 file to reseed from

  • --reseed.urls= - Reseed URLs, separated by comma

  • --addressbook.defaulturl= - AddressBook subscription URL for initial setup

  • --addressbook.subscriptions= - AddressBook subscriptions URLs, separated by comma

  • --limits.transittunnels= - Override maximum number of transit tunnels. 2500 by default

  • --limits.openfiles= - Maximum size of corefile in Kb (0 - use system limit)

  • --limits.coresize= - Maximum size of corefile in Kb (0 - use system limit)

Config files

INI-like, syntax is the following : = . Comments are "#", not ";" as you may expect. See boost ticket All command-line parameters are allowed as keys, but note for those which contains dot (.).

For example:

i2pd.conf:

# comment
log = true
ipv6 = true
# settings for specific module
[httpproxy]
port = 4444
# ^^ this will be --httproxy.port= in cmdline
# another comment
[sam]
enabled = true

See also commented config with examples of all options in docs/i2pd.conf.

tunnels.conf:

# outgoing tunnel sample, to remote service
# mandatory parameters:
# * type -- always "client"
# * port -- local port to listen to
# * destination -- i2p hostname
# optional parameters (may be omitted)
# * keys -- our identity, if unset, will be generated on every startup,
#     if set and file missing, keys will be generated and placed to this file
# * address -- local interface to bind
# * signaturetype -- signature type for new destination. 0 (DSA/SHA1), 1 (EcDSA/SHA256) or 7 (EdDSA/SHA512)
[IRC]
type = client
address = 127.0.0.1
port = 6668
destination = irc.postman.i2p
keys = irc-keys.dat
#
# incoming tunnel sample, for local service
# mandatory parameters:
# * type -- "server" or "http"
# * host -- ip address of our service
# * port -- port of our service
# * keys -- file with LeaseSet of address in i2p
# optional parameters (may be omitted)
# * inport -- optional, i2p service port, if unset - the same as 'port'
# * accesslist -- comma-separated list of i2p addresses, allowed to connect
#    every address is b32 without '.b32.i2p' part
[LOCALSITE]
type = http
host = 127.0.0.1
port = 80
keys = site-keys.dat
#
[IRC-SERVER]
type = server
host = 127.0.0.1
port = 6667
keys = irc.dat

Also see this page for more tunnel examples.