i2pd cmdline options
--------------------

* --host=               - The external IP (deprecated). 
* --port=               - The port to listen on
* --httpaddress=        - The address to listen on (HTTP server)
* --httpport=           - The port to listen on (HTTP server)
* --log=                - Enable or disable logging to file. 1 for yes, 0 for no.
* --daemon=             - Enable or disable daemon mode. 1 for yes, 0 for no.
* --service=            - 1 if uses system folders (/var/run/i2pd.pid, /var/log/i2pd.log, /var/lib/i2pd).
* --v6=                 - 1 if supports communication through ipv6, off by default
* --floodfill=          - 1 if router is floodfill, off by default
* --bandwidth=          - L if bandwidth is limited to 32Kbs/sec, O if not. Always O if floodfill, otherwise L by default.
* --httpproxyaddress=   - The address to listen on (HTTP Proxy)
* --httpproxyport=      - The port to listen on (HTTP Proxy) 4446 by default
* --socksproxyaddress=  - The address to listen on (SOCKS Proxy)
* --socksproxyport=     - The port to listen on (SOCKS Proxy). 4447 by default
* --proxykeys=          - optional keys file for proxy's local destination
* --ircaddress=         - The address to listen on (IRC tunnel)
* --ircport=            - The port listen on (IRC tunnel). 6668 by default
* --ircdest=            - I2P destination address of IRC server. For example irc.postman.i2p
* --irckeys=            - optional keys file for tunnel's local destination 
* --eepkeys=            - File name containing destination keys, for example privKeys.dat.
                          The file will be created if it does not already exist (issue #110).
* --eephost=            - Address incoming trafic forward to. 127.0.0.1 by default
* --eepport=            - Port incoming trafic forward to. 80 by default
* --samaddress=         - The address to listen on (SAM bridge)
* --samport=            - Port of SAM bridge. Usually 7656. SAM is off if not specified
* --bobaddress=         - The address to listen on (BOB command channel)
* --bobport=            - Port of BOB command channel. Usually 2827. BOB is off if not specified
* --i2pcontroladdress=  - The address to listen on (I2P control service)
* --i2pcontrolport=     - Port of I2P control service. Usually 7650. I2PControl is off if not specified
* --tunnelscfg=         - Tunnels Config file (default: ~/.i2pd/tunnels.cfg or /var/lib/i2pd/tunnels.cfg)
* --conf=               - Config file (default: ~/.i2pd/i2p.conf or /var/lib/i2pd/i2p.conf)
                          This parameter will be silently ignored if the specified config file does not exist.
                          Options specified on the command line take precedence over those in the config file.

Config files
------------

INI-like, syntax is the following : <key> = <value>.
All command-line parameters are allowed as keys, for example:

i2p.conf:

	log = 1
	v6 = 0
	ircdest = irc.postman.i2p

tunnels.cfg (filename of this config is subject of change):

  ; outgoing tunnel sample, to remote service
  ; mandatory parameters:
  ; * type -- always "client"
  ; * port -- local port to listen to
  ; * destination -- i2p hostname
  ; optional parameters (may be omitted)
  ; * keys -- our identity, if unset, will be generated on every startup,
  ;     if set and file missing, keys will be generated and placed to this file
	[IRC]
	type = client
	port = 6668
	destination = irc.echelon.i2p
	keys = irc-keys.dat
	;
  ; incoming tunnel sample, for local service
  ; mandatory parameters:
  ; * type -- always "server"
  ; * host -- ip address of our service
  ; * port -- port of our service
  ; * keys -- file with LeaseSet of address in i2p
  ; optional parameters (may be omitted)
  ; * inport -- optional, i2p service port, if unset - the same as 'port'
  ; * accesslist -- comma-separated list of i2p addresses, allowed to connect
  ;    every address is b32 without '.b32.i2p' part
	[LOCALSITE]
	type = server
	host = 127.0.0.1
	port = 80
	keys = site-keys.dat
	inport = 81
	accesslist = <b32>[,<b32>]

Also see [this page](https://github.com/PurpleI2P/i2pd/wiki/tunnels.cfg) for more tunnel examples.