Update contrib/i2pd.conf file with more options

contrib/i2pd.conf

@@ -26,15 +26,11 @@
 ## Log messages above this level (debug, *info, warn, error, none)
 ## If you set it to none, logging will be disabled
 # loglevel = info
-
-## Path to storage of i2pd data (RI, keys, peer profiles, ...)
-## Default: ~/.i2pd or /var/lib/i2pd
-# datadir = /var/lib/i2pd
+## Write full CLF-formatted date and time to log (default: write only time)
+# logclftime = true
 
 ## Daemon mode. Router will go to background after start
 # daemon = true
-## Run as a service. Router will use system folders like ‘/var/lib/i2pd’
-# service = true
 
 ## Specify a family, router belongs to (default - none)
 # family =
@@ -55,9 +51,15 @@ ipv6 = false
 
 ## Network interface to bind to
 # ifname =
+## You can specify different interfaces for IPv4 and IPv6
+# ifname4 = 
+# ifname6 = 
 
 ## Enable NTCP transport (default = true)
 # ntcp = true
+## If you run i2pd behind a proxy server, you can only use NTCP transport with ntcpproxy option 
+## Should be http://address:port or socks://address:port
+# ntcpproxy = http://127.0.0.1:8118
 ## Enable SSU transport (default = true)
 # ssu = true
 
@@ -69,6 +71,8 @@ ipv6 = false
 ## X - unlimited
 ## Default is X for floodfill, L for regular node
 # bandwidth = L
+## Max % of bandwidth limit for transit. 0-100. 100 by default
+# share = 100
 
 ## Router will not accept transit tunnels, disabling transit traffic completely
 ## (default = false)
@@ -77,46 +81,17 @@ ipv6 = false
 ## Router will be floodfill
 # floodfill = true
 
-[limits]
-## Maximum active transit sessions (default:2500)
-# transittunnels = 2500
-
-[precomputation]
-## Enable or disable elgamal precomputation table
-## By default, enabled on i386 hosts
-# elgamal = true
-
-[upnp]
-## Enable or disable UPnP: automatic port forwarding (enabled by default in WINDOWS, ANDROID)
-# enabled = false
-
-## Name i2pd appears in UPnP forwardings list (default = I2Pd)
-# name = I2Pd
-
-[reseed]
-## Enable or disable reseed data verification.
-verify = true
-## URLs to request reseed data from, separated by comma
-## Default: "mainline" I2P Network reseeds
-# urls = https://reseed.i2p-projekt.de/,https://i2p.mooo.com/netDb/,https://netdb.i2p2.no/
-## Path to local reseed data file (.su3) for manual reseeding
-# file = /path/to/i2pseeds.su3
-## or HTTPS URL to reseed from
-# file = https://legit-website.com/i2pseeds.su3
-
-[addressbook]
-## AddressBook subscription URL for initial setup
-## Default: inr.i2p at "mainline" I2P Network
-# defaulturl = http://joajgazyztfssty4w2on5oaqksz6tqoxbduy553y34mf4byv6gpq.b32.i2p/export/alive-hosts.txt
-## Optional subscriptions URLs, separated by comma
-# subscriptions = http://inr.i2p/export/alive-hosts.txt,http://stats.i2p/cgi-bin/newhosts.txt,http://rus.i2p/hosts.txt
-
 [http]
+## Web Console settings
 ## Uncomment and set to 'false' to disable Web Console
 # enabled = true
 ## Address and port service will listen on
 address = 127.0.0.1
 port = 7070
+## Uncomment following lines to enable Web Console authentication 
+# auth = true
+# user = i2pd
+# pass = changeme
 
 [httpproxy]
 ## Uncomment and set to 'false' to disable HTTP Proxy
@@ -126,6 +101,11 @@ address = 127.0.0.1
 port = 4444
 ## Optional keys file for proxy local destination
 # keys = http-proxy-keys.dat
+## Enable address helper for adding .i2p domains with "jump URLs" (default: true)
+# addresshelper = true
+## Address of a proxy server inside I2P, which is used to visit regular Internet
+# outproxy = http://false.i2p
+## httpproxy section also accepts I2CP parameters, like "inbound.length" etc.
 
 [socksproxy]
 ## Uncomment and set to 'false' to disable SOCKS Proxy
@@ -135,13 +115,13 @@ address = 127.0.0.1
 port = 4447
 ## Optional keys file for proxy local destination
 # keys = socks-proxy-keys.dat
-
 ## Socks outproxy. Example below is set to use Tor for all connections except i2p
 ## Uncomment and set to 'true' to enable using of SOCKS outproxy
 # outproxy.enabled = false
 ## Address and port of outproxy
 # outproxy = 127.0.0.1
 # outproxyport = 9050
+## socksproxy section also accepts I2CP parameters, like "inbound.length" etc.
 
 [sam]
 ## Uncomment and set to 'true' to enable SAM Bridge
@@ -170,3 +150,71 @@ enabled = true
 ## Address and port service will listen on
 # address = 127.0.0.1
 # port = 7650
+## Authentication password. "itoopie" by default
+# password = itoopie
+
+[precomputation]
+## Enable or disable elgamal precomputation table
+## By default, enabled on i386 hosts
+# elgamal = true
+
+[upnp]
+## Enable or disable UPnP: automatic port forwarding (enabled by default in WINDOWS, ANDROID)
+# enabled = false
+## Name i2pd appears in UPnP forwardings list (default = I2Pd)
+# name = I2Pd
+
+[reseed]
+## Options for bootstrapping into I2P network, aka reseeding
+## Enable or disable reseed data verification.
+verify = true
+## URLs to request reseed data from, separated by comma
+## Default: "mainline" I2P Network reseeds
+# urls = https://reseed.i2p-projekt.de/,https://i2p.mooo.com/netDb/,https://netdb.i2p2.no/
+## Path to local reseed data file (.su3) for manual reseeding
+# file = /path/to/i2pseeds.su3
+## or HTTPS URL to reseed from
+# file = https://legit-website.com/i2pseeds.su3
+## Path to local ZIP file or HTTPS URL to reseed from
+# zipfile = /path/to/netDb.zip
+## If you run i2pd behind a proxy server, set proxy server for reseeding here
+## Should be http://address:port or socks://address:port
+# proxy = http://127.0.0.1:8118
+## Minimum number of known routers, below which i2pd triggers reseeding. 25 by default
+# threshold = 25
+
+[addressbook]
+## AddressBook subscription URL for initial setup
+## Default: inr.i2p at "mainline" I2P Network
+# defaulturl = http://joajgazyztfssty4w2on5oaqksz6tqoxbduy553y34mf4byv6gpq.b32.i2p/export/alive-hosts.txt
+## Optional subscriptions URLs, separated by comma
+# subscriptions = http://inr.i2p/export/alive-hosts.txt,http://stats.i2p/cgi-bin/newhosts.txt,http://rus.i2p/hosts.txt
+
+[limits]
+## Maximum active transit sessions (default:2500)
+# transittunnels = 2500
+## Limit number of open file descriptors (0 - use system limit)  
+# openfiles = 0
+## Maximum size of corefile in Kb (0 - use system limit) 
+# coresize = 0
+## Threshold to start probabalistic backoff with ntcp sessions (0 - use system limit) 
+# ntcpsoft = 0
+## Maximum number of ntcp sessions (0 - use system limit) 
+# ntcphard = 0
+
+[trust]
+## Enable explicit trust options. false by default
+# enabled = true
+## Make direct I2P connections only to routers in specified Family.
+# family = MyFamily
+## Make direct I2P connections only to routers specified here. Comma separated list of base64 identities.
+# routers = 
+## Should we hide our router from other routers? false by default
+# hidden = true
+
+[exploratory]
+## Exploratory tunnels settings with default values
+# inbound.length = 2 
+# inbound.quantity = 3
+# outbound.length = 2
+# outbound.quantity = 3