From 83d9513c4a97fb82adbdc1aff202873353944c33 Mon Sep 17 00:00:00 2001
From: libre-net-society <l-n-s@sigaint.org>
Date: Sun, 20 Mar 2016 01:39:35 +0300
Subject: [PATCH] Added example configuration file

---
 docs/i2pd.conf | 111 +++++++++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 111 insertions(+)
 create mode 100644 docs/i2pd.conf

diff --git a/docs/i2pd.conf b/docs/i2pd.conf
new file mode 100644
index 00000000..32c524ca
--- /dev/null
+++ b/docs/i2pd.conf
@@ -0,0 +1,111 @@
+## Configuration file for a typical i2pd user
+## See https://i2pd.readthedocs.org/en/latest/configuration.html
+## for more options you can use in this file.
+
+## Lines that begin with "## " try to explain what's going on. Lines
+## that begin with just "#" are disabled commands: you can enable them
+## by removing the "#" symbol.
+
+## Tunnels config file 
+## Default: ~/.i2pd/tunnels.cfg or /var/lib/i2pd/tunnels.cfg
+#tunconf = /var/lib/i2pd/tunnels.cfg
+
+## Where to write pidfile (don't write by default)
+#pidfile = /var/run/i2pd.pid
+
+## Logging configuration section
+## By default logs go to stdout with level info
+##
+## Logs destination (stdout, file) 
+#log = file
+## Path to logfile (default - autodetect)
+#logfile = /var/log/i2pd.log
+## Log messages above this level (debug, *info, warn, error)
+#loglevel = info
+
+## Path to storage of i2pd data (RI, keys, peer profiles, ...)
+## Default: ~/.i2pd or /var/lib/i2pd
+#datadir = /var/lib/i2pd
+
+## Daemon mode. Router will go to background after start
+#daemon 
+## Run as a service. Router will use system folders like ‘/var/lib/i2pd’
+#service
+
+## External IP address to listen for connections
+## By default i2pd sets IP automatically
+#host = 1.2.3.4
+## Port to listen for connections
+## By default i2pd picks random port. You MUST pick a random number too, 
+## don't just uncomment this
+#port = 4321
+##Enable communication through ipv6
+ipv6 
+## Bandwidth configuration
+## L limit bandwidth to 32Kbs/sec, O - to 256Kbs/sec, P - unlimited
+## Default is P for floodfill, L for regular node
+#bandwidth = L
+
+## Router will not accept transit tunnels at startup
+#notransit 
+
+## Router will be floodfill
+#floodfill
+
+## Section for Web Console
+## By default it's available at 127.0.0.1:7070 even if it's not configured
+[http]
+## The address to listen on
+address = 127.0.0.1 
+## The port to listen on
+port = 7070 
+
+## Section for HTTP proxy
+## By default it's available at 127.0.0.1:4444 even if it's not configured
+[httpproxy]
+## The address to listen on
+address = 127.0.0.1 
+## The port to listen on
+port = 4444 
+## Optional keys file for proxy local destination
+#keys = http-proxy-keys.dat 
+## Uncomment if you want to disable HTTP proxy
+#enabled=false
+
+## Section for Socks proxy
+## By default it's available at 127.0.0.1:4447 even if it's not configured
+#[socksproxy]
+## The address to listen on
+#address = 127.0.0.1 
+## The port to listen on
+#port = 4447 
+## Optional keys file for proxy local destination
+#keys = socks-proxy-keys.dat 
+## Uncomment if you want to disable Socks proxy
+#enabled=false
+## Socks outproxy. Example below is set to use Tor for all connections except i2p
+## Address of outproxy
+#outproxy = 127.0.0.1 
+## Outproxy remote port
+#outproxyport = 9050 
+
+## Section for SAM bridge
+#[sam]
+## The address to listen on
+#address = 127.0.0.1 
+## Port of SAM bridge
+#port = 7656
+
+## Section for BOB command channel
+#[bob]
+## The address to listen on
+#address = 127.0.0.1
+## Port of BOB command channel. Usually 2827. BOB is off if not specified
+#port = 2827 
+
+## Section for I2PControl protocol 
+#[i2pcontrol]
+## The address to listen on
+#address = 127.0.0.1 
+## Port of I2P control service
+#port = 7650