OpenCL GPU miner
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
 
 
 
 
 

376 lines
16 KiB

/*-
* Copyright 2009 Colin Percival
* Copyright 2013,2014 Alexander Peslyak
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* This file was originally written by Colin Percival as part of the Tarsnap
* online backup system.
*/
#ifndef _YESCRYPT_H_
#define _YESCRYPT_H_
#include <stdint.h>
#include <stdlib.h> /* for size_t */
#include <errno.h>
#ifdef __cplusplus
extern "C" {
#endif
//extern void yescrypt_hash_sp(const unsigned char *input, unsigned char *output);
extern void yescrypt_hash(const unsigned char *input, unsigned char *output);
/**
* crypto_scrypt(passwd, passwdlen, salt, saltlen, N, r, p, buf, buflen):
* Compute scrypt(passwd[0 .. passwdlen - 1], salt[0 .. saltlen - 1], N, r,
* p, buflen) and write the result into buf. The parameters r, p, and buflen
* must satisfy r * p < 2^30 and buflen <= (2^32 - 1) * 32. The parameter N
* must be a power of 2 greater than 1.
*
* Return 0 on success; or -1 on error.
*
* MT-safe as long as buf is local to the thread.
*/
extern int crypto_scrypt(const uint8_t * __passwd, size_t __passwdlen,
const uint8_t * __salt, size_t __saltlen,
uint64_t __N, uint32_t __r, uint32_t __p,
uint8_t * __buf, size_t __buflen);
/**
* Internal type used by the memory allocator. Please do not use it directly.
* Use yescrypt_shared_t and yescrypt_local_t as appropriate instead, since
* they might differ from each other in a future version.
*/
typedef struct {
void * base, * aligned;
size_t base_size, aligned_size;
} yescrypt_region_t;
/**
* Types for shared (ROM) and thread-local (RAM) data structures.
*/
typedef yescrypt_region_t yescrypt_shared1_t;
typedef struct {
yescrypt_shared1_t shared1;
uint32_t mask1;
} yescrypt_shared_t;
typedef yescrypt_region_t yescrypt_local_t;
/**
* Possible values for yescrypt_init_shared()'s flags argument.
*/
typedef enum {
YESCRYPT_SHARED_DEFAULTS = 0,
YESCRYPT_SHARED_PREALLOCATED = 0x100
} yescrypt_init_shared_flags_t;
/**
* Possible values for the flags argument of yescrypt_kdf(),
* yescrypt_gensalt_r(), yescrypt_gensalt(). These may be OR'ed together,
* except that YESCRYPT_WORM and YESCRYPT_RW are mutually exclusive.
* Please refer to the description of yescrypt_kdf() below for the meaning of
* these flags.
*/
typedef enum {
/* public */
YESCRYPT_WORM = 0,
YESCRYPT_RW = 1,
YESCRYPT_PARALLEL_SMIX = 2,
YESCRYPT_PWXFORM = 4,
/* private */
__YESCRYPT_INIT_SHARED_1 = 0x10000,
__YESCRYPT_INIT_SHARED_2 = 0x20000,
__YESCRYPT_INIT_SHARED = 0x30000
} yescrypt_flags_t;
#define YESCRYPT_KNOWN_FLAGS \
(YESCRYPT_RW | YESCRYPT_PARALLEL_SMIX | YESCRYPT_PWXFORM | \
__YESCRYPT_INIT_SHARED)
/**
* yescrypt_init_shared(shared, param, paramlen, N, r, p, flags, mask,
* buf, buflen):
* Optionally allocate memory for and initialize the shared (ROM) data
* structure. The parameters N, r, and p must satisfy the same conditions as
* with crypto_scrypt(). param and paramlen specify a local parameter with
* which the ROM is seeded. If buf is not NULL, then it is used to return
* buflen bytes of message digest for the initialized ROM (the caller may use
* this to verify that the ROM has been computed in the same way that it was on
* a previous run).
*
* Return 0 on success; or -1 on error.
*
* If bit YESCRYPT_SHARED_PREALLOCATED in flags is set, then memory for the
* ROM is assumed to have been preallocated by the caller, with
* shared->shared1.aligned being the start address of the ROM and
* shared->shared1.aligned_size being its size (which must be consistent with
* N, r, and p). This may be used e.g. when the ROM is to be placed in a SysV
* shared memory segment allocated by the caller.
*
* mask controls the frequency of ROM accesses by yescrypt_kdf(). Normally it
* should be set to 1, to interleave RAM and ROM accesses, which works well
* when both regions reside in the machine's RAM anyway. Other values may be
* used e.g. when the ROM is memory-mapped from a disk file. Recommended mask
* values are powers of 2 minus 1 or minus 2. Here's the effect of some mask
* values:
* mask value ROM accesses in SMix 1st loop ROM accesses in SMix 2nd loop
* 0 0 1/2
* 1 1/2 1/2
* 2 0 1/4
* 3 1/4 1/4
* 6 0 1/8
* 7 1/8 1/8
* 14 0 1/16
* 15 1/16 1/16
* 1022 0 1/1024
* 1023 1/1024 1/1024
*
* Actual computation of the ROM contents may be avoided, if you don't intend
* to use a ROM but need a dummy shared structure, by calling this function
* with NULL, 0, 0, 0, 0, YESCRYPT_SHARED_DEFAULTS, 0, NULL, 0 for the
* arguments starting with param and on.
*
* MT-safe as long as shared is local to the thread.
*/
extern int yescrypt_init_shared(yescrypt_shared_t * __shared,
const uint8_t * __param, size_t __paramlen,
uint64_t __N, uint32_t __r, uint32_t __p,
yescrypt_init_shared_flags_t __flags, uint32_t __mask,
uint8_t * __buf, size_t __buflen);
/**
* yescrypt_free_shared(shared):
* Free memory that had been allocated with yescrypt_init_shared().
*
* Return 0 on success; or -1 on error.
*
* MT-safe as long as shared is local to the thread.
*/
extern int yescrypt_free_shared(yescrypt_shared_t * __shared);
/**
* yescrypt_init_local(local):
* Initialize the thread-local (RAM) data structure. Actual memory allocation
* is currently fully postponed until a call to yescrypt_kdf() or yescrypt_r().
*
* Return 0 on success; or -1 on error.
*
* MT-safe as long as local is local to the thread.
*/
extern int yescrypt_init_local(yescrypt_local_t * __local);
/**
* yescrypt_free_local(local):
* Free memory that may have been allocated for an initialized thread-local
* (RAM) data structure.
*
* Return 0 on success; or -1 on error.
*
* MT-safe as long as local is local to the thread.
*/
extern int yescrypt_free_local(yescrypt_local_t * __local);
/**
* yescrypt_kdf(shared, local, passwd, passwdlen, salt, saltlen,
* N, r, p, t, flags, buf, buflen):
* Compute scrypt(passwd[0 .. passwdlen - 1], salt[0 .. saltlen - 1], N, r,
* p, buflen), or a revision of scrypt as requested by flags and shared, and
* write the result into buf. The parameters N, r, p, and buflen must satisfy
* the same conditions as with crypto_scrypt(). t controls computation time
* while not affecting peak memory usage. shared and flags may request
* special modes as described below. local is the thread-local data
* structure, allowing to preserve and reuse a memory allocation across calls,
* thereby reducing its overhead.
*
* Return 0 on success; or -1 on error.
*
* t controls computation time. t = 0 is optimal in terms of achieving the
* highest area-time for ASIC attackers. Thus, higher computation time, if
* affordable, is best achieved by increasing N rather than by increasing t.
* However, if the higher memory usage (which goes along with higher N) is not
* affordable, or if fine-tuning of the time is needed (recall that N must be a
* power of 2), then t = 1 or above may be used to increase time while staying
* at the same peak memory usage. t = 1 increases the time by 25% and
* decreases the normalized area-time to 96% of optimal. (Of course, in
* absolute terms the area-time increases with higher t. It's just that it
* would increase slightly more with higher N*r rather than with higher t.)
* t = 2 increases the time by another 20% and decreases the normalized
* area-time to 89% of optimal. Thus, these two values are reasonable to use
* for fine-tuning. Values of t higher than 2 result in further increase in
* time while reducing the efficiency much further (e.g., down to around 50% of
* optimal for t = 5, which runs 3 to 4 times slower than t = 0, with exact
* numbers varying by the flags settings).
*
* Classic scrypt is available by setting t = 0 and flags to YESCRYPT_WORM and
* passing a dummy shared structure (see the description of
* yescrypt_init_shared() above for how to produce one). In this mode, the
* thread-local memory region (RAM) is first sequentially written to and then
* randomly read from. This algorithm is friendly towards time-memory
* tradeoffs (TMTO), available both to defenders (albeit not in this
* implementation) and to attackers.
*
* Setting YESCRYPT_RW adds extra random reads and writes to the thread-local
* memory region (RAM), which makes TMTO a lot less efficient. This may be
* used to slow down the kinds of attackers who would otherwise benefit from
* classic scrypt's efficient TMTO. Since classic scrypt's TMTO allows not
* only for the tradeoff, but also for a decrease of attacker's area-time (by
* up to a constant factor), setting YESCRYPT_RW substantially increases the
* cost of attacks in area-time terms as well. Yet another benefit of it is
* that optimal area-time is reached at an earlier time than with classic
* scrypt, and t = 0 actually corresponds to this earlier completion time,
* resulting in quicker hash computations (and thus in higher request rate
* capacity). Due to these properties, YESCRYPT_RW should almost always be
* set, except when compatibility with classic scrypt or TMTO-friendliness are
* desired.
*
* YESCRYPT_PARALLEL_SMIX moves parallelism that is present with p > 1 to a
* lower level as compared to where it is in classic scrypt. This reduces
* flexibility for efficient computation (for both attackers and defenders) by
* requiring that, short of resorting to TMTO, the full amount of memory be
* allocated as needed for the specified p, regardless of whether that
* parallelism is actually being fully made use of or not. (For comparison, a
* single instance of classic scrypt may be computed in less memory without any
* CPU time overhead, but in more real time, by not making full use of the
* parallelism.) This may be desirable when the defender has enough memory
* with sufficiently low latency and high bandwidth for efficient full parallel
* execution, yet the required memory size is high enough that some likely
* attackers might end up being forced to choose between using higher latency
* memory than they could use otherwise (waiting for data longer) or using TMTO
* (waiting for data more times per one hash computation). The area-time cost
* for other kinds of attackers (who would use the same memory type and TMTO
* factor or no TMTO either way) remains roughly the same, given the same
* running time for the defender. In the TMTO-friendly YESCRYPT_WORM mode, as
* long as the defender has enough memory that is just as fast as the smaller
* per-thread regions would be, doesn't expect to ever need greater
* flexibility (except possibly via TMTO), and doesn't need backwards
* compatibility with classic scrypt, there are no other serious drawbacks to
* this setting. In the YESCRYPT_RW mode, which is meant to discourage TMTO,
* this new approach to parallelization makes TMTO less inefficient. (This is
* an unfortunate side-effect of avoiding some random writes, as we have to in
* order to allow for parallel threads to access a common memory region without
* synchronization overhead.) Thus, in this mode this setting poses an extra
* tradeoff of its own (higher area-time cost for a subset of attackers vs.
* better TMTO resistance). Setting YESCRYPT_PARALLEL_SMIX also changes the
* way the running time is to be controlled from N*r*p (for classic scrypt) to
* N*r (in this modification). All of this applies only when p > 1. For
* p = 1, this setting is a no-op.
*
* Passing a real shared structure, with ROM contents previously computed by
* yescrypt_init_shared(), enables the use of ROM and requires YESCRYPT_RW for
* the thread-local RAM region. In order to allow for initialization of the
* ROM to be split into a separate program, the shared->shared1.aligned and
* shared->shared1.aligned_size fields may be set by the caller of
* yescrypt_kdf() manually rather than with yescrypt_init_shared().
*
* local must be initialized with yescrypt_init_local().
*
* MT-safe as long as local and buf are local to the thread.
*/
extern int yescrypt_kdf(const yescrypt_shared_t * __shared,
yescrypt_local_t * __local,
const uint8_t * __passwd, size_t __passwdlen,
const uint8_t * __salt, size_t __saltlen,
uint64_t __N, uint32_t __r, uint32_t __p, uint32_t __t,
yescrypt_flags_t __flags,
uint8_t * __buf, size_t __buflen);
/**
* yescrypt_r(shared, local, passwd, passwdlen, setting, buf, buflen):
* Compute and encode an scrypt or enhanced scrypt hash of passwd given the
* parameters and salt value encoded in setting. If the shared structure is
* not dummy, a ROM is used and YESCRYPT_RW is required. Otherwise, whether to
* use the YESCRYPT_WORM (classic scrypt) or YESCRYPT_RW (time-memory tradeoff
* discouraging modification) is determined by the setting string. shared and
* local must be initialized as described above for yescrypt_kdf(). buf must
* be large enough (as indicated by buflen) to hold the encoded hash string.
*
* Return the encoded hash string on success; or NULL on error.
*
* MT-safe as long as local and buf are local to the thread.
*/
extern uint8_t * yescrypt_r(const yescrypt_shared_t * __shared,
yescrypt_local_t * __local,
const uint8_t * __passwd, size_t __passwdlen,
const uint8_t * __setting,
uint8_t * __buf, size_t __buflen);
/**
* yescrypt(passwd, setting):
* Compute and encode an scrypt or enhanced scrypt hash of passwd given the
* parameters and salt value encoded in setting. Whether to use the
* YESCRYPT_WORM (classic scrypt) or YESCRYPT_RW (time-memory tradeoff
* discouraging modification) is determined by the setting string.
*
* Return the encoded hash string on success; or NULL on error.
*
* This is a crypt(3)-like interface, which is simpler to use than
* yescrypt_r(), but it is not MT-safe, it does not allow for the use of a ROM,
* and it is slower than yescrypt_r() for repeated calls because it allocates
* and frees memory on each call.
*
* MT-unsafe.
*/
extern uint8_t * yescrypt(const uint8_t * __passwd, const uint8_t * __setting);
/**
* yescrypt_gensalt_r(N_log2, r, p, flags, src, srclen, buf, buflen):
* Generate a setting string for use with yescrypt_r() and yescrypt() by
* encoding into it the parameters N_log2 (which is to be set to base 2
* logarithm of the desired value for N), r, p, flags, and a salt given by src
* (of srclen bytes). buf must be large enough (as indicated by buflen) to
* hold the setting string.
*
* Return the setting string on success; or NULL on error.
*
* MT-safe as long as buf is local to the thread.
*/
extern uint8_t * yescrypt_gensalt_r(
uint32_t __N_log2, uint32_t __r, uint32_t __p,
yescrypt_flags_t __flags,
const uint8_t * __src, size_t __srclen,
uint8_t * __buf, size_t __buflen);
/**
* yescrypt_gensalt(N_log2, r, p, flags, src, srclen):
* Generate a setting string for use with yescrypt_r() and yescrypt(). This
* function is the same as yescrypt_gensalt_r() except that it uses a static
* buffer and thus is not MT-safe.
*
* Return the setting string on success; or NULL on error.
*
* MT-unsafe.
*/
extern uint8_t * yescrypt_gensalt(
uint32_t __N_log2, uint32_t __r, uint32_t __p,
yescrypt_flags_t __flags,
const uint8_t * __src, size_t __srclen);
#ifdef __cplusplus
}
#endif
#endif /* !_YESCRYPT_H_ */