This README contains details about the cgminer RPC API If you start cgminer with the "--api-listen" option, it will listen on a simple TCP/IP socket for single string API requests from the same machine running cgminer and reply with a string and then close the socket each time If you add the "--api-network" option, it will accept API requests from any network attached computer. You can only access the comands that reply with data in this mode. By default, you cannot access any privileged command that affects the miner - you will receive an access denied status message see --api-allow below. You can specify IP addresses/prefixes that are only allowed to access the API with the "--api-allow" option e.g. --api-allow W:192.168.0.1,10.0.0/24 will allow 192.168.0.1 or any address matching 10.0.0.*, but nothing else IP addresses are automatically padded with extra '.0's as needed Without a /prefix is the same as specifying /32 0/0 means all IP addresses. The 'W:' on the front gives that address/subnet privileged access to commands that modify cgminer. Without it those commands return an access denied status. Privileged access is checked in the order the IP addresses were supplied to "--api-allow" The first match determines the privilege level. Using the "--api-allow" option overides the "--api-network" option if they are both specified With "--api-allow", 127.0.0.1 is not by default given access unless specified The RPC API request can be either simple text or JSON. If the request is JSON (starts with '{'), it will reply with a JSON formatted response, otherwise it replies with text formatted as described further below. The JSON request format required is '{"command":"CMD","parameter":"PARAM"}' (though of course parameter is not required for all requests) where "CMD" is from the "Request" column below and "PARAM" would be e.g. the CPU/GPU number if required. An example request in both formats to set GPU 0 fan to 80%: gpufan|0,80 {"command":"gpufan","parameter":"0,80"} The format of each reply (unless stated otherwise) is a STATUS section followed by an optional detail section From API version 1.7 onwards, reply strings in JSON and Text have the necessary escaping as required to avoid ambiguity - they didn't before 1.7 For JSON the 2 characters '"' and '\' are escaped with a '\' before them For Text the 4 characters '|' ',' '=' and '\' are escaped the same way Only user entered information will contain characters that require being escaped, such as Pool URL, User and Password or the Config save filename, when they are returned in messages or as their values by the API For API version 1.4 and later: The STATUS section is: STATUS=X,When=NNN,Code=N,Msg=string,Description=string| STATUS=X Where X is one of: W - Warning I - Informational S - Success E - Error F - Fatal (code bug) When=NNN Standard long time of request in seconds Code=N Each unique reply has a unigue Code (See api.c - #define MSG_NNNNNN) Msg=string Message matching the Code value N Description=string This defaults to the cgminer version but is the value of --api-description if it was specified at runtime. For API version 1.10 and later: The list of requests - a (*) means it requires privileged access - and replies are: Request Reply Section Details ------- ------------- ------- version VERSION CGMiner=cgminer version API=API version config CONFIG Some miner configuration information: GPU Count=N, <- the number of GPUs PGA Count=N, <- the number of PGAs CPU Count=N, <- the number of CPUs Pool Count=N, <- the number of Pools ADL=X, <- Y or N if ADL is compiled in the code ADL in use=X, <- Y or N if any GPU has ADL Strategy=Name, <- the current pool strategy Log Interval=N, <- log interval (--log N) Device Code=GPU ICA | <- spaced list of compiled devices summary SUMMARY The status summary of the miner e.g. Elapsed=NNN,Found Blocks=N,Getworks=N,...| pools POOLS The status of each pool e.g. Pool=0,URL=http://pool.com:6311,Status=Alive,...| devs DEVS Each available GPU, PGA and CPU with their details e.g. GPU=0,Accepted=NN,MHS av=NNN,...,Intensity=D| Last Share Time=NNN, <- standand long time in seconds (or 0 if none) of last accepted share Last Share Pool=N, <- pool number (or -1 if none) Will not report PGAs if PGA mining is disabled Will not report CPUs if CPU mining is disabled gpu|N GPU The details of a single GPU number N in the same format and details as for DEVS pga|N PGA The details of a single PGA number N in the same format and details as for DEVS This is only available if PGA mining is enabled Use 'pgacount' or 'config' first to see if there are any cpu|N CPU The details of a single CPU number N in the same format and details as for DEVS This is only available if CPU mining is enabled Use 'cpucount' or 'config' first to see if there are any gpucount GPUS Count=N| <- the number of GPUs pgacount PGAS Count=N| <- the number of PGAs Always returns 0 if PGA mining is disabled cpucount CPUS Count=N| <- the number of CPUs Always returns 0 if CPU mining is disabled switchpool|N (*) none There is no reply section just the STATUS section stating the results of switching pool N to the highest priority (the pool is also enabled) The Msg includes the pool URL enablepool|N (*) none There is no reply section just the STATUS section stating the results of enabling pool N The Msg includes the pool URL addpool|URL,USR,PASS (*) none There is no reply section just the STATUS section stating the results of attempting to add pool N The Msg includes the pool URL Use '\\' to get a '\' and '\,' to include a comma inside URL, USR or PASS disablepool|N (*) none There is no reply section just the STATUS section stating the results of disabling pool N The Msg includes the pool URL removepool|N (*) none There is no reply section just the STATUS section stating the results of removing pool N The Msg includes the pool URL N.B. all details for the pool will be lost gpuenable|N (*) none There is no reply section just the STATUS section stating the results of the enable request gpudisable|N (*) none There is no reply section just the STATUS section stating the results of the disable request gpurestart|N (*) none There is no reply section just the STATUS section stating the results of the restart request gpuintensity|N,I (*) none There is no reply section just the STATUS section stating the results of setting GPU N intensity to I gpumem|N,V (*) none There is no reply section just the STATUS section stating the results of setting GPU N memoryclock to V MHz gpuengine|N,V (*) none There is no reply section just the STATUS section stating the results of setting GPU N clock to V MHz gpufan|N,V (*) none There is no reply section just the STATUS section stating the results of setting GPU N fan speed to V% gpuvddc|N,V (*) none There is no reply section just the STATUS section stating the results of setting GPU N vddc to V save|filename (*) none There is no reply section just the STATUS section stating success or failure saving the cgminer config to filename The filename is optional and will use the cgminer default if not specified quit (*) none There is no status section but just a single "BYE" reply before cgminer quits notify NOTIFY The last status and history count of each devices problem This lists all devices including those not supported by the 'devs' command e.g. NOTIFY=0,Name=GPU,ID=0,Last Well=1332432290,...| privileged (*) none There is no reply section just the STATUS section stating an error if you do not have privileged access to the API and success if you do have privilege The command doesn't change anything in cgminer pgaenable|N (*) none There is no reply section just the STATUS section stating the results of the enable request You cannot enable a PGA if it's status is not WELL This is only available if PGA mining is enabled pgadisable|N (*) none There is no reply section just the STATUS section stating the results of the disable request This is only available if PGA mining is enabled devdetails DEVDETAILS Each device with a list of their static details This lists all devices including those not supported by the 'devs' command e.g. DEVDETAILS=0,Name=GPU,ID=0,Driver=opencl,...| restart (*) none There is no status section but just a single "RESTART" reply before cgminer restarts stats STATS Each device or pool that has 1 or more getworks with a list of stats regarding getwork times The values returned by stats may change in future versions thus would not normally be displayed Device drivers are also able to add stats to the end of the details returned When you enable, disable or restart a GPU or PGA, you will also get Thread messages in the cgminer status window When you switch to a different pool to the current one, you will get a 'Switching to URL' message in the cgminer status windows Obviously, the JSON format is simply just the names as given before the '=' with the values after the '=' If you enable cgminer debug (-D or --debug) you will also get messages showing details of the requests received and the replies There are included 4 program examples for accessing the API: api-example.php - a php script to access the API usAge: php api-example.php command by default it sends a 'summary' request to the miner at 127.0.0.1:4028 If you specify a command it will send that request instead You must modify the line "$socket = getsock('127.0.0.1', 4028);" at the beginning of "function request($cmd)" to change where it looks for cgminer API.java/API.class a java program to access the API (with source code) usAge is: java API command address port Any missing or blank parameters are replaced as if you entered: java API summary 127.0.0.1 4028 api-example.c - a 'C' program to access the API (with source code) usAge: api-example [command [ip/host [port]]] again, as above, missing or blank parameters are replaced as if you entered: api-example summary 127.0.0.1 4028 miner.php - an example web page to access the API This includes buttons and inputs to attempt access to the privileged commands Read the top of the file (miner.php) for details of how to tune the display and also to use the option to display a multi-rig summary ---------- Feature Changelog for external applications using the API: API V1.12 Modified API commands: 'stats' - more pool stats added Support for the ModMinerQuad FPGA was added ---------- API V1.11 (cgminer v2.4.2) Modified API commands: 'save' no longer requires a filename (use default if not specified) 'save' incorrectly returned status E (error) on success before. It now correctly returns S (success) ---------- API V1.10 (cgminer v2.4.1) Added API commands: 'stats' N.B. the 'stats' command can change at any time so any specific content present should not be relied upon. The data content is mainly used for debugging purposes or hidden options in cgminer and can change as development work requires Modified API commands: 'pools' added "Last Share Time" ---------- API V1.9 (cgminer v2.4.0) Added API commands: 'restart' Modified API commands: 'notify' corrected invalid JSON ---------- API V1.8 (cgminer v2.3.5) Added API commands: 'devdetails' Support for the ZTex FPGA was added ---------- API V1.7 (cgminer v2.3.4) Added API commands: 'removepool' Modified API commands: 'pools' added "User" From API version 1.7 onwards, reply strings in JSON and Text have the necessary escaping as required to avoid ambiguity For JSON the 2 characters '"' and '\' are escaped with a '\' before them For Text the 4 characters '|' ',' '=' and '\' are escaped the same way ---------- API V1.6 (cgminer v2.3.2) Added API commands: 'pga' 'pgaenable' 'pgadisable' 'pgacount' Modified API commands: 'devs' now includes Icarus and Bitforce FPGA devices 'notify' added "*" to the front of the name of all numeric error fields 'config' correct "Log Interval" to use numeric (not text) type for JSON Support for Icarus and Bitforce FPGAs was added ---------- API V1.5 was not released ---------- API V1.4 (Kano's interim release of cgminer v2.3.1) Added API commands: 'notify' Modified API commands: 'config' added "Device Code" and "OS" Added "When" to the STATUS reply section of all commands ---------- API V1.3 (cgminer v2.3.1-2) Added API commands: 'addpool' Modified API commands: 'devs'/'gpu' added "Total MH" for each device 'summary' added "Total MH" ---------- API V1.2 (cgminer v2.3.0) Added API commands: 'enablepool' 'disablepool' 'privileged' Modified API commands: 'config' added "Log Interval" Starting with API V1.2, any attempt to access a command that requires privileged security, from an IP address that does not have privileged security, will return an "Access denied" Error Status ---------- API V1.1 (cgminer v2.2.4) There were no changes to the API commands in cgminer v2.2.4, however support was added to cgminer for IP address restrictions with the --api-allow option ---------- API V1.1 (cgminer v2.2.2) Prior to V1.1, devs/gpu incorrectly reported GPU0 Intensity for all GPUs Modified API commands: 'devs'/'gpu' added "Last Share Pool" and "Last Share Time" for each device ---------- API V1.0 (cgminer v2.2.0) Remove default CPU support Added API commands: 'config' 'gpucount' 'cpucount' 'switchpool' 'gpuintensity' 'gpumem' 'gpuengine' 'gpufan' 'gpuvddc' 'save' ---------- API V0.7 (cgminer v2.1.0) Initial release of the API in the main cgminer git Commands: 'version' 'devs' 'pools' 'summary' 'gpuenable' 'gpudisable' 'gpurestart' 'gpu' 'cpu' 'gpucount' 'cpucount' 'quit'