168 Commits (bc0bb822bc37d5067ec29169db106b8cd3fa3d59)

Author SHA1 Message Date
Con Kolivas 5a24c2829a Try to set temperature regardless of whether get fanspeed fails. This may need to be reverted if it causes problems. 13 years ago
Con Kolivas 12e99c83dd Initialise all the iSizes of the ADL structures for completeness. 13 years ago
Con Kolivas 07c21bcbc4 Don't forget to set the actual fanspeed too! 13 years ago
Con Kolivas 3c38adc9ce Only set the speed once, but set it only if fanspeed get says the card is ok and ready. 13 years ago
Con Kolivas 67fe6ab726 Don't both with adapter speed set as it has no effect on mining speed. 13 years ago
Con Kolivas 92e1ffd374 Store the targetfan even if the later getfanspeed fails in case it's temporary. 13 years ago
Con Kolivas 8feb661dbf Set the fanspeed in coarse rounded up values and then ever finer grained values in case the card does not support fine values. 13 years ago
Con Kolivas 3f10e80a93 If the user defined flag is not set on fanspeed, set the fanspeed with it first. 13 years ago
Con Kolivas 87ec3f4789 Convert fanspeed management to default on exit. 13 years ago
Con Kolivas 918ec7b0b2 Enable adl earlier to allow values to be set in init_adl or they're silently ignored! 13 years ago
Con Kolivas 1db6ab0b01 Set targetfan when fanspeed is set on parameters. 13 years ago
Con Kolivas 2e09eee708 Use the gpu_fan set value as the starting fan speed. 13 years ago
Con Kolivas 88eb514cd1 Only display supported values from fanspeed on change settings. 13 years ago
Con Kolivas b4009adaac Remove redundant check. 13 years ago
Con Kolivas ebae03f22b Do not bother resetting values to old ones if changes to GPU parameters report failure, instead returning a failure code only if the return value from get() differs. 13 years ago
Con Kolivas dff1a81da7 Use a re-entrant value to store what fanspeed we're trying to set in case the card doesn't support small changes. 13 years ago
Con Kolivas 076677dd53 Flag any devices with autofan or autogpu as being managed. 13 years ago
Con Kolivas a602f4e55f Only force the adapter speed to high if we've flagged this device as being managed. 13 years ago
Con Kolivas 25c77ae85f Only display values in the log if they're supported and standardise device log line printing. 13 years ago
Con Kolivas 2fafdab985 Allow adapterid 0 cards to enumerate as a device as they will be non-AMD cards, and enable ADL on any AMD card. 13 years ago
Con Kolivas b7d817812c Setting the hysteresis is unlikely to be useful on the fly and doesn't belong in the per-gpu submenu. 13 years ago
Con Kolivas 0e1c291624 Display fan range in autofan status. 13 years ago
Con Kolivas e0a9f1aae3 Allow temperature targets to be set on a per-card basis on the command line. 13 years ago
Con Kolivas d6f3bd0564 Display which GPU has overheated in warning message. 13 years ago
Con Kolivas b50041c880 Allow per-device fan ranges to be set and use them in auto-fan mode. 13 years ago
Con Kolivas 9b5cd61886 Implement accepting a range of engine speeds as well to allow a lower limit to be specified on the command line. 13 years ago
Con Kolivas 7ea7f5f324 Allow temperatures greater than 100 degrees. 13 years ago
Con Kolivas 4628db5bfd Change the fan speed by only 5% if it's over the target temperature but less than the hysteresis value to minimise overshoot down in temperature. 13 years ago
Con Kolivas 3997f308a0 Add a thermal cutoff option as well and set it to 95 degrees by default. 13 years ago
Con Kolivas 311420db9d Flag adl as active if any card is successfully activated. 13 years ago
Con Kolivas 058303bcf3 Only reset values on exiting if we've ever modified them. 13 years ago
Con Kolivas b8be1e6c15 Ignore whether the display is active or not since only display enabled devices work this way, and we skip over repeat entries anwyay. 13 years ago
Con Kolivas f89c032d2b The ° character is not reliably shown on all platforms so remove it. 13 years ago
Con Kolivas fd23532bdb Make adl attempt to compile only on win32 or linux since there is no support for it on onther platforms, and fix sleep() definition on win32. 13 years ago
Con Kolivas 16aff37c66 Fix compilation errors on mingw32 to do with order of pulling in headers, curses.h and definition of bool. 13 years ago
Con Kolivas 9f618f4a97 Lower profile settings cannot be higher than higher profile ones so link any drops in settings. 13 years ago
Con Kolivas ca3793558a Ramp up the fan more if we're over target temperature. 13 years ago
Con Kolivas bc9724406a Provide locking around all adl calls to prevent races. 13 years ago
Con Kolivas 666d724b8a Set a safe starting fan speed if we're automanaging the speeds. 13 years ago
Con Kolivas 5fc56a45ee Force the speed to high on startup and restore it to whatever the setting was on exit. 13 years ago
Con Kolivas cb29fb7d57 Remove the safety checks in speed setting since confirmation is done first in the menu, then show the new current values after a short pause. 13 years ago
Con Kolivas ee06a3baca Limit fanspeed to 85% properly when temperature is below overheat levels. 13 years ago
Con Kolivas 40491cd537 Change default hysteresis to 3 degrees for lower average fanspeeds. 13 years ago
Con Kolivas 47f1a75924 Implement setting the GPU powertune value of all devices or each device as a comma separated value. 13 years ago
Con Kolivas 656bacc5a9 Get the value of powertune in get_stats. 14 years ago
Con Kolivas 7711c6fbd5 Implement changing of powertune value from the GPU change settings menu. 14 years ago
Con Kolivas bd292258d3 Add support for monitoring powertune setting. 14 years ago
Con Kolivas 3a5663cac1 Implement setting the GPU fan speed of all devices or each device as a comma separated value. 14 years ago
Con Kolivas 8ae273c56c Implement setting the GPU voltage of all devices or each device as a comma separated value. 14 years ago
Con Kolivas 54bc30ceec Implement setting the GPU memory clock speed of all devices or each device as a comma separated value. 14 years ago