sgminer

Commit Graph

Author	SHA1	Message	Date
ystarnaud	b3c07acd08	Xn Algorithms Fine Tuning Added options to fine tune X11-15 algorithms	10 years ago
troky	3ddffaa915	Compatibility fix.	10 years ago
troky	dbe0263c2d	Fixed device display when both --device and --remove-disabled options are used.	10 years ago
troky	82b5320f36	Check if mining threads are initialized before restarting them.	10 years ago
Jan Berdajs	5bd2689069	Hard reset only when gpu-threads or devices are changed, but not when algorithm is changed. Also a little refactor. Conflicts: sgminer.c	10 years ago
Jan Berdajs	deacbdd65e	immediately exit threads if doing hard reset	10 years ago
Jan Berdajs	19fcb5eae7	improve locking to prevent race condition stratum could respond faster than we are able to add the sent share into the hash, which could cause memory leaks	10 years ago
ystarnaud	f8fcbbcd0a	Config writer fix Reworked how the config writer works to properly save the config file. Sometimes settings would get lost in profiles. Also changed algorithm switch to only perform a soft reset and lowered the verbosity of the algorithm switcher.	11 years ago
Jan Berdajs	04722e2517	sshare could have already been free'd by parse_stratum_response in stratum_rthread by the point we reach this code - possible segfault fixed	11 years ago
Jan Berdajs	4a9ee47cd9	Add log-file option to automatically redirect stderr to a file From bfgminer `b0240dd004`	11 years ago
Jan Berdajs	0bd7a9ff63	After cancelling a thread (unless it's detached, but mining threads aren't), it is always necessary to join the thread so the system will release resources. This also simplifies kill_mining a bit.	11 years ago
Jan Berdajs	e33590f37d	Thread was never joined because thr_info_cancel sets pth to 0. Should improve mining thread hard reset.	11 years ago
Jan Berdajs	363f52df47	Write to both stderr and console within same console lock "session" From `7dd230cd8f`	11 years ago
Jan Berdajs	2d66c44b42	Add debug-log documentation and enable it by default	11 years ago
Jan Berdajs	eb6f47e503	Add debug-log setting to log everything when stderr is redirected to file Based on code from BFGMiner	11 years ago
Jan Berdajs	485ec9ac88	rename poorly named variable	11 years ago
troky	b6aefc6ebe	Fixed segfault when adding pool profile via ncurses GUI #322	11 years ago
Jan Berdajs	30d0a9be78	Deprecating "difficulty-multiplier" setting	11 years ago
troky	74d4cfabb5	Added Janson version string to log output.	11 years ago
Jan Berdajs	27709ced83	Remove now unused temporary fix for algo switch	11 years ago
ystarnaud	69ab3a8cf4	Changed the way hard restart is done for better compatibility with windows pthread.	11 years ago
Jan Berdajs	a0e95b3687	some improvements for the zero-hashrate fix, and more debug output	11 years ago
ystarnaud	cf4aa31be0	Switcher thread fix Fixed the mining threads block causing the miner to hang on algo switcher. Thanks @mrbrdo for the help.	11 years ago
ystarnaud	55cd3ec220	Hangup fix The switcher would hang when no settings needed to be applied and it tried to tell the mining threads to resume working. Still an issue if you attempt to switch between two pools that apply settings but don't perform a hard reset.	11 years ago
troky	dc3ec7907e	Thread info struct should be initialized/allocated for disabled devices, too.	11 years ago
ystarnaud	5c9126fd61	X14 Implementation Added X14 and cleaned up the X13/X15 kernels so all 3 offshoots are in sync. New option "--hamsi-short" or "hamsi-short":true to add a small boost. May not work on all GPUs.	11 years ago
Jan Berdajs	1c2de13498	fix broken disabled devices when remove-disabled is set	11 years ago
Jan Berdajs	8f53b7c86c	safer	11 years ago
Jan Berdajs	976873ba49	more locks for devices	11 years ago
Jan Berdajs	92deefcbca	Fix bad lock	11 years ago
Jan Berdajs	40894db5d2	Changing disabled devices on pool switch is not possible if remove-disabled is set (enabled)	11 years ago
Jan Berdajs	7507790880	GPUs cannot be hotplugged	11 years ago
Jan Berdajs	7f0451336b	Refactor and stability improvements when restarting threads enable_device should not modify mining_threads because this is unsafe after initialization. it is also not necessary in most cases where it is currently used, except in initialization refactored some of the new restart_mining_threads code and incorporated above change for better stability properly handle disabled devices in restart_mining_threads when opt_removedisabled is set total_devices was set incorrectly if the disabled devices were not at the end of devices, so total_devices is now always the number of detected devices, since that is what is in the devices variable	11 years ago
Jan Berdajs	be7d47dcee	add lock when accessing mining_threads	11 years ago
Jan Berdajs	028f19e946	remove old commented-out code	11 years ago
Jan Berdajs	ba7c4892fb	Remove obsolete benchmark mode This mode/setting is unusable left-over from SHA-256 cgminer. It does not work with Scrypt or other algorithms that are used in sgminer. Removed in single commit so it can be used as reference, if benchmark mode is added in the future.	11 years ago
ystarnaud	9d54637e3c	Fix HW Issue at startup Fixed an issue where the GPUs would be initialized on first pool alive, but the mining threads would end up being initialized on another pool because it was selected right away.	11 years ago
ystarnaud	3ae5f97b94	Algorithm Switcher Update Updated Algorithm switcher to change on pool rather than on algorithm. This way if, for example, 2 pools use the same algorithm but different GPU settings, the settings will be applied when changing pool. Additionally: * Included a "common" algorithm type in API pool/profile listing. For example using "marucoin-mod" will return "X13", "darkcoin-mod" will return "X11", scrypt + nfactor != 10 will return "NScrypt", etc... * Added "kernel" config option to be backwards compatible with other miners' configs. * Added a few algorithm aliases: x11mod -> darkcoin-mod, x13mod -> marucoin-mod... * New config keyword: "includes", which holds an array of include files. This is to counter the JSON limitation not allowing multiple values with the same name, thus preventing inclusion of multiple files.	11 years ago
Noel Maersk	78014ab0d5	work queue: verbose log as to why staged work is being discarded.	11 years ago
ystarnaud	7024d14c88	Fix high fan issue at startup/algo switch Was setting fan speed to gpu_fan (which is the max) instead of min_fan on GPU settings change.	11 years ago
ystarnaud	99082f4269	GPU initialization update Undo `212009a48a` as it caused some issues with some pools and configs.	11 years ago
ystarnaud	212009a48a	GPU Initialization update Moved the GPU initialization block to happen when a pool is actually switched to. Sometimes the first pool alive isn't the first pool switched to. This would result in unnecessary kernel loading if the first pool detected alive isn't used right away.	11 years ago
ystarnaud	76287736e2	Fixed GPU initialization Fixed the GPU initialization to happen only after the first pool alive is switched to. This way no unnecessary kernels are loaded.	11 years ago
ystarnaud	e9b82991ec	60 second quit fix after algo switch	11 years ago
ystarnaud	1914cef959	Fixed x13 and other issues Corrected the x13 errors and fixed a few issues with the config parser's handling of the default_profile.	11 years ago
Noel Maersk	513307c790	config: remove commented-out old config-loading code.	11 years ago
Noel Maersk	5309da57cc	config: remove unused variable.	11 years ago
Noel Maersk	832ac82bf6	Updated API functionality Fixed addpool to specify a profile or algorithm and sets defaults if nothing specified. Also added a new API function to change multipool strategy. Conflicts (resolved): sgminer.c	11 years ago
ystarnaud	d9b4798e8e	More options added Added the following options to profiles/pools: device (set devices on/off per profile), lookup-gap, shaders, worksize, gpu-powertune, gpu-vddc	11 years ago
Noel Maersk	9fe5272c92	Updated config writer Config writer now supports profiles and pool specific values. In addition, the config writer now makes use of the jansson library to create proper json objects and save them to the config file. This is much better than trying to write our own json code. Conflicts (resolved): sgminer.c	11 years ago

1 2 3 4 5 ...

278 Commits (b3c07acd0846d2c311b1a7e6961078d1efa7e71f)