Con Kolivas
|
400cb21d8b
|
Off by one error in performance level.
|
2011-12-24 08:06:53 +11:00 |
|
Con Kolivas
|
f4d657ee7f
|
Only adjust gpu engine speed in autotune mode if the gpu is currently at the performance level of that being adjusted.
|
2011-12-24 07:35:42 +11:00 |
|
Con Kolivas
|
8c63061eaa
|
Allow a fixed speed difference between memory and GPU clock speed that will change memory speed when GPU speed is changed in autotune mode.
|
2011-10-23 20:52:16 +11:00 |
|
Con Kolivas
|
5976f6b32f
|
Get rid of unused variable.
|
2011-10-14 21:51:55 +11:00 |
|
Con Kolivas
|
0ae3f71824
|
Check last temperature we reached and don't change fan speed if it's already correcting.
|
2011-09-23 10:46:34 +10:00 |
|
Con Kolivas
|
b8ea0dd194
|
Update curses logging to allow LOG_WARNING and LOG_ERR messages to still go through while within the menu, and drop share message to LOG_NOTICE.
|
2011-09-17 13:25:04 +10:00 |
|
Con Kolivas
|
5a24c2829a
|
Try to set temperature regardless of whether get fanspeed fails. This may need to be reverted if it causes problems.
|
2011-09-16 16:46:14 +10:00 |
|
Con Kolivas
|
12e99c83dd
|
Initialise all the iSizes of the ADL structures for completeness.
|
2011-09-16 16:42:11 +10:00 |
|
Con Kolivas
|
07c21bcbc4
|
Don't forget to set the actual fanspeed too!
|
2011-09-16 10:40:58 +10:00 |
|
Con Kolivas
|
3c38adc9ce
|
Only set the speed once, but set it only if fanspeed get says the card is ok and ready.
|
2011-09-16 10:27:36 +10:00 |
|
Con Kolivas
|
67fe6ab726
|
Don't both with adapter speed set as it has no effect on mining speed.
|
2011-09-16 10:26:25 +10:00 |
|
Con Kolivas
|
92e1ffd374
|
Store the targetfan even if the later getfanspeed fails in case it's temporary.
|
2011-09-16 08:31:27 +10:00 |
|
Con Kolivas
|
8feb661dbf
|
Set the fanspeed in coarse rounded up values and then ever finer grained values in case the card does not support fine values.
|
2011-09-15 20:48:20 +10:00 |
|
Con Kolivas
|
3f10e80a93
|
If the user defined flag is not set on fanspeed, set the fanspeed with it first.
|
2011-09-15 12:19:07 +10:00 |
|
Con Kolivas
|
87ec3f4789
|
Convert fanspeed management to default on exit.
|
2011-09-15 11:21:54 +10:00 |
|
Con Kolivas
|
918ec7b0b2
|
Enable adl earlier to allow values to be set in init_adl or they're silently ignored!
|
2011-09-14 23:03:50 +10:00 |
|
Con Kolivas
|
1db6ab0b01
|
Set targetfan when fanspeed is set on parameters.
|
2011-09-14 23:03:37 +10:00 |
|
Con Kolivas
|
2e09eee708
|
Use the gpu_fan set value as the starting fan speed.
Don't try and change the value if get() doesn't match as it's unreliable, just save the reentrant value.
Limit fanspeeds to reported iMax and iMin.
|
2011-09-14 21:45:04 +10:00 |
|
Con Kolivas
|
88eb514cd1
|
Only display supported values from fanspeed on change settings.
|
2011-09-11 11:57:08 +10:00 |
|
Con Kolivas
|
b4009adaac
|
Remove redundant check.
|
2011-09-11 11:47:22 +10:00 |
|
Con Kolivas
|
ebae03f22b
|
Do not bother resetting values to old ones if changes to GPU parameters report failure, instead returning a failure code only if the return value from get() differs.
|
2011-09-11 11:38:02 +10:00 |
|
Con Kolivas
|
dff1a81da7
|
Use a re-entrant value to store what fanspeed we're trying to set in case the card doesn't support small changes.
Force it to a multiple of 10% if it fails on trying to speed up the fan.
|
2011-09-11 11:25:28 +10:00 |
|
Con Kolivas
|
076677dd53
|
Flag any devices with autofan or autogpu as being managed.
|
2011-09-11 11:08:01 +10:00 |
|
Con Kolivas
|
a602f4e55f
|
Only force the adapter speed to high if we've flagged this device as being managed.
|
2011-09-11 11:06:52 +10:00 |
|
Con Kolivas
|
25c77ae85f
|
Only display values in the log if they're supported and standardise device log line printing.
|
2011-09-09 11:53:45 +10:00 |
|
Con Kolivas
|
2fafdab985
|
Allow adapterid 0 cards to enumerate as a device as they will be non-AMD cards, and enable ADL on any AMD card.
|
2011-09-09 10:03:10 +10:00 |
|
Con Kolivas
|
b7d817812c
|
Setting the hysteresis is unlikely to be useful on the fly and doesn't belong in the per-gpu submenu.
|
2011-09-08 14:10:55 +10:00 |
|
Con Kolivas
|
0e1c291624
|
Display fan range in autofan status.
|
2011-09-08 14:05:41 +10:00 |
|
Con Kolivas
|
e0a9f1aae3
|
Allow temperature targets to be set on a per-card basis on the command line.
|
2011-09-08 13:53:10 +10:00 |
|
Con Kolivas
|
d6f3bd0564
|
Display which GPU has overheated in warning message.
|
2011-09-08 13:33:24 +10:00 |
|
Con Kolivas
|
b50041c880
|
Allow per-device fan ranges to be set and use them in auto-fan mode.
|
2011-09-08 13:29:13 +10:00 |
|
Con Kolivas
|
9b5cd61886
|
Implement accepting a range of engine speeds as well to allow a lower limit to be specified on the command line.
|
2011-09-08 13:04:39 +10:00 |
|
Con Kolivas
|
7ea7f5f324
|
Allow temperatures greater than 100 degrees.
|
2011-09-08 10:51:32 +10:00 |
|
Con Kolivas
|
4628db5bfd
|
Change the fan speed by only 5% if it's over the target temperature but less than the hysteresis value to minimise overshoot down in temperature.
|
2011-09-07 10:44:57 +10:00 |
|
Con Kolivas
|
3997f308a0
|
Add a thermal cutoff option as well and set it to 95 degrees by default.
|
2011-09-07 10:43:26 +10:00 |
|
Con Kolivas
|
311420db9d
|
Flag adl as active if any card is successfully activated.
|
2011-09-07 10:03:06 +10:00 |
|
Con Kolivas
|
058303bcf3
|
Only reset values on exiting if we've ever modified them.
|
2011-09-07 10:00:10 +10:00 |
|
Con Kolivas
|
b8be1e6c15
|
Ignore whether the display is active or not since only display enabled devices work this way, and we skip over repeat entries anwyay.
|
2011-09-07 09:17:51 +10:00 |
|
Con Kolivas
|
f89c032d2b
|
The ° character is not reliably shown on all platforms so remove it.
|
2011-09-06 12:04:23 +10:00 |
|
Con Kolivas
|
fd23532bdb
|
Make adl attempt to compile only on win32 or linux since there is no support for it on onther platforms, and fix sleep() definition on win32.
|
2011-09-06 09:41:58 +10:00 |
|
Con Kolivas
|
16aff37c66
|
Fix compilation errors on mingw32 to do with order of pulling in headers, curses.h and definition of bool.
|
2011-09-06 09:36:42 +10:00 |
|
Con Kolivas
|
9f618f4a97
|
Lower profile settings cannot be higher than higher profile ones so link any drops in settings.
|
2011-09-05 19:30:03 +10:00 |
|
Con Kolivas
|
ca3793558a
|
Ramp up the fan more if we're over target temperature.
|
2011-09-05 19:30:03 +10:00 |
|
Con Kolivas
|
bc9724406a
|
Provide locking around all adl calls to prevent races.
|
2011-09-05 19:30:03 +10:00 |
|
Con Kolivas
|
666d724b8a
|
Set a safe starting fan speed if we're automanaging the speeds.
|
2011-09-05 19:30:03 +10:00 |
|
Con Kolivas
|
5fc56a45ee
|
Force the speed to high on startup and restore it to whatever the setting was on exit.
|
2011-09-05 19:30:03 +10:00 |
|
Con Kolivas
|
cb29fb7d57
|
Remove the safety checks in speed setting since confirmation is done first in the menu, then show the new current values after a short pause.
|
2011-09-05 19:30:03 +10:00 |
|
Con Kolivas
|
ee06a3baca
|
Limit fanspeed to 85% properly when temperature is below overheat levels.
|
2011-09-05 19:30:03 +10:00 |
|
Con Kolivas
|
40491cd537
|
Change default hysteresis to 3 degrees for lower average fanspeeds.
|
2011-09-05 19:30:03 +10:00 |
|
Con Kolivas
|
47f1a75924
|
Implement setting the GPU powertune value of all devices or each device as a comma separated value.
|
2011-09-05 19:30:03 +10:00 |
|