Con Kolivas
d6f3bd0564
Display which GPU has overheated in warning message.
2011-09-08 13:33:24 +10:00
Con Kolivas
b50041c880
Allow per-device fan ranges to be set and use them in auto-fan mode.
2011-09-08 13:29:13 +10:00
Con Kolivas
9b5cd61886
Implement accepting a range of engine speeds as well to allow a lower limit to be specified on the command line.
2011-09-08 13:04:39 +10:00
Con Kolivas
7ea7f5f324
Allow temperatures greater than 100 degrees.
2011-09-08 10:51:32 +10:00
Con Kolivas
4628db5bfd
Change the fan speed by only 5% if it's over the target temperature but less than the hysteresis value to minimise overshoot down in temperature.
2011-09-07 10:44:57 +10:00
Con Kolivas
3997f308a0
Add a thermal cutoff option as well and set it to 95 degrees by default.
2011-09-07 10:43:26 +10:00
Con Kolivas
311420db9d
Flag adl as active if any card is successfully activated.
2011-09-07 10:03:06 +10:00
Con Kolivas
058303bcf3
Only reset values on exiting if we've ever modified them.
2011-09-07 10:00:10 +10:00
Con Kolivas
b8be1e6c15
Ignore whether the display is active or not since only display enabled devices work this way, and we skip over repeat entries anwyay.
2011-09-07 09:17:51 +10:00
Con Kolivas
f89c032d2b
The ° character is not reliably shown on all platforms so remove it.
2011-09-06 12:04:23 +10:00
Con Kolivas
fd23532bdb
Make adl attempt to compile only on win32 or linux since there is no support for it on onther platforms, and fix sleep() definition on win32.
2011-09-06 09:41:58 +10:00
Con Kolivas
16aff37c66
Fix compilation errors on mingw32 to do with order of pulling in headers, curses.h and definition of bool.
2011-09-06 09:36:42 +10:00
Con Kolivas
9f618f4a97
Lower profile settings cannot be higher than higher profile ones so link any drops in settings.
2011-09-05 19:30:03 +10:00
Con Kolivas
ca3793558a
Ramp up the fan more if we're over target temperature.
2011-09-05 19:30:03 +10:00
Con Kolivas
bc9724406a
Provide locking around all adl calls to prevent races.
2011-09-05 19:30:03 +10:00
Con Kolivas
666d724b8a
Set a safe starting fan speed if we're automanaging the speeds.
2011-09-05 19:30:03 +10:00
Con Kolivas
5fc56a45ee
Force the speed to high on startup and restore it to whatever the setting was on exit.
2011-09-05 19:30:03 +10:00
Con Kolivas
cb29fb7d57
Remove the safety checks in speed setting since confirmation is done first in the menu, then show the new current values after a short pause.
2011-09-05 19:30:03 +10:00
Con Kolivas
ee06a3baca
Limit fanspeed to 85% properly when temperature is below overheat levels.
2011-09-05 19:30:03 +10:00
Con Kolivas
40491cd537
Change default hysteresis to 3 degrees for lower average fanspeeds.
2011-09-05 19:30:03 +10:00
Con Kolivas
47f1a75924
Implement setting the GPU powertune value of all devices or each device as a comma separated value.
2011-09-05 19:30:03 +10:00
Con Kolivas
656bacc5a9
Get the value of powertune in get_stats.
2011-09-04 23:14:36 +10:00
Con Kolivas
7711c6fbd5
Implement changing of powertune value from the GPU change settings menu.
2011-09-04 23:10:57 +10:00
Con Kolivas
bd292258d3
Add support for monitoring powertune setting.
2011-09-04 22:56:19 +10:00
Con Kolivas
3a5663cac1
Implement setting the GPU fan speed of all devices or each device as a comma separated value.
2011-09-04 22:25:31 +10:00
Con Kolivas
8ae273c56c
Implement setting the GPU voltage of all devices or each device as a comma separated value.
2011-09-04 22:08:42 +10:00
Con Kolivas
54bc30ceec
Implement setting the GPU memory clock speed of all devices or each device as a comma separated value.
2011-09-04 22:01:58 +10:00
Con Kolivas
ec8808d004
Implement setting the GPU engine clock speed of all devices or each device as a comma separated value.
2011-09-04 21:55:06 +10:00
Con Kolivas
12a167a3f1
Implement menus to change temperature limits.
2011-09-04 13:57:40 +10:00
Con Kolivas
1ed219372e
Combine all stats collating into one function to avoid repeating function calls on each variable.
2011-09-04 10:19:29 +10:00
Con Kolivas
e9f886d805
Allow target, overheat and hysteresis temperatures to be set from command line.
2011-09-04 09:43:53 +10:00
Con Kolivas
847adf689b
Add a small amount of hysteresis before lowering clock speed.
2011-09-04 07:17:07 +10:00
Con Kolivas
9b7262ec71
Clean up by setting performance profiles and fan settings to startup levels on exit.
2011-09-04 00:36:14 +10:00
Con Kolivas
e9b5885ebe
Add a gpu autotune option which adjusts GPU speed to maintain a target temperature within the bounds of the default GPU speed and any overclocking set.
2011-09-03 22:30:11 +10:00
Con Kolivas
dcc97e45db
Add an --auto-fan command line option to allow all GPUs to have autofan enabled from startup.
2011-09-03 15:46:57 +10:00
Con Kolivas
495adcbf5f
Implement auto fanspeed adjustment to maintain a target temperature and fanspeed below 85%, with an overheat check that will speed the fan up to 100%.
2011-09-03 15:33:53 +10:00
Con Kolivas
320a5f2a92
Make sure to read off the value in RPM only.
2011-09-03 14:52:25 +10:00
Con Kolivas
bf2669b83a
Minor corrections to set fan speed by percentage.
2011-09-03 14:45:37 +10:00
Con Kolivas
07b847f7e7
Implement fan speed setting.
2011-09-03 14:33:05 +10:00
Con Kolivas
3681ae84cc
Implement changing memory speed and voltage on the fly.
2011-09-03 13:28:49 +10:00
Con Kolivas
35ace46325
Enable changing of engine clock setting on the fly.
2011-09-03 13:02:21 +10:00
Con Kolivas
d57cd91955
Implement ATI ADL support for GPU parameter monitoring now and setting later (temp, fan, clocks etc.).
...
Check for the presence of the ADL header files in ADL_SDK.
Import adl_functions.h from amd overdrive ctrl.
Implement a setup function that tries to detect GPUs that support the ADL and link in the parameters into the gpus struct.
Put a summary of monitoring information from the GPU menu.
2011-09-03 10:53:35 +10:00
