GOSTSec
/
sgminer
mirror of https://github.com/GOSTSec/sgminer
1
0
Fork 0
Code Issues Releases Wiki Activity
Browse Source

Update API.md (3 squashed commits).

djm34
ystarnaud 11 years ago committed by Noel Maersk
parent
e7881ff9f7
commit
3042745757
1 changed files with 250 additions and 162 deletions
Whitespace
Show all changes Ignore whitespace when comparing lines Ignore changes in amount of whitespace Ignore changes in whitespace at EOL
Unified View
Diff Options
Show Stats Download Patch File Download Diff File
  1. 366
      doc/API.md

366
doc/API.md
Unescape View File

@ -1,155 +1,183 @@
This README contains details about the sgminer RPC API # sgminer RPC API Documentation
It also includes some detailed information at the end, *Work in Progress!*
about using miner.php
This README contains details about the sgminer RPC API and also includes some detailed information
at the end, about using [miner.php](#miner-php).
If you start sgminer with the "--api-listen" option, it will listen on a
simple TCP/IP socket for single string API requests from the same machine ---
running sgminer and reply with a string and then close the socket each time
If you add the "--api-network" option, it will accept API requests from any ## API Configuration
network attached computer.
If you start sgminer with the `--api-listen` option, it will listen on a simple TCP/IP socket for single string API requests from the same machine running sgminer and reply with a string and then close the socket each time If you add the `--api-network` option, it will accept API requests from any network attached computer.
You can only access the comands that reply with data in this mode.
By default, you cannot access any privileged command that affects the miner - You can only access the comands that reply with data in this mode. By default, you cannot access any privileged command that affects the miner - you will receive an access denied status message see `--api-allow` below.
you will receive an access denied status message see --api-allow below.
You can specify IP addresses/prefixes that are only allowed to access the API with the `--api-allow` option.
You can specify IP addresses/prefixes that are only allowed to access the API
with the "--api-allow" option e.g. --api-allow W:192.168.0.1,10.0.0/24 ```
will allow 192.168.0.1 or any address matching 10.0.0.*, but nothing else --api-allow W:192.168.0.1,10.0.0/24
IP addresses are automatically padded with extra '.0's as needed ```
Without a /prefix is the same as specifying /32
0/0 means all IP addresses. The example above will allow 192.168.0.1 or any address matching 10.0.0.*, but nothing else. IP addresses are automatically padded with extra '.0's as needed Without a /prefix is the same as specifying /32 0/0 means all IP addresses. The `W:` on the front gives that address/subnet privileged access to commands that modify sgminer (thus all API commands). Without it those commands return an access denied status. See `--api-groups` below to define other groups like `W:`. Privileged access is checked in the order the IP addresses were supplied to `--api-allow`. The first match determines the privilege level. Using the `--api-allow` option overides the `--api-network` option if they are both specified. With `--api-allow`, 127.0.0.1 is not by default given access unless specified.
The 'W:' on the front gives that address/subnet privileged access to commands
that modify sgminer (thus all API commands) If you start sgminer also with the `--api-mcast` option, it will listen for a multicast message and reply to it with a message containing it's API port number, but only if the IP address of the sender is allowed API access.
Without it those commands return an access denied status.
See --api-groups below to define other groups like W: More groups (like the privileged group `W:`) can be defined using the `--api-groups` command. Valid groups are only the letters A-Z (except R & W are predefined) and are not case sensitive. The `R:` group is the same as not privileged access. The `W:` group is (as stated) privileged access (thus all API commands). To give an IP address/subnet access to a group you use the group letter in front of the IP address instead of `W:` e.g. `P:192.168.0/32`. An IP address/subnet can only be a member of one group
Privileged access is checked in the order the IP addresses were supplied to
"--api-allow"
The first match determines the privilege level.
Using the "--api-allow" option overides the "--api-network" option if they
are both specified
With "--api-allow", 127.0.0.1 is not by default given access unless specified
If you start sgminer also with the "--api-mcast" option, it will listen for
a multicast message and reply to it with a message containing it's API port
number, but only if the IP address of the sender is allowed API access
More groups (like the privileged group W:) can be defined using the
--api-groups command
Valid groups are only the letters A-Z (except R & W are predefined) and are
not case sensitive
The R: group is the same as not privileged access
The W: group is (as stated) privileged access (thus all API commands)
To give an IP address/subnet access to a group you use the group letter
in front of the IP address instead of W: e.g. P:192.168.0/32
An IP address/subnet can only be a member of one group
A sample API group would be: A sample API group would be:
--api-groups
P:switchpool:enablepool:addpool:disablepool:removepool:poolpriority:* ```
This would create a group 'P' that can do all current pool commands and all --api-groups P:switchpool:enablepool:addpool:disablepool:removepool:poolpriority:*
non-priviliged commands - the '*' means all non-priviledged commands ```
Without the '*' the group would only have access to the pool commands
This would create a group `P` that can do all current pool commands and all non-priviliged commands - the asterisk (\*) means all non-priviledged commands. Without the asterisk (\*), the group would only have access to the pool commands.
Defining multiple groups example: Defining multiple groups example:
--api-groups Q:quit:restart:*,S:save
This would define 2 groups: ```
Q: that can 'quit' and 'restart' as well as all non-priviledged commands --api-groups Q:quit:restart:*,S:save
S: that can only 'save' and no other commands ```
This would define 2 groups: `Q:`, that can `quit` and `restart` as well as all non-priviledged commands, and `S:`, that can only `save` and no other commands.
For API configuration options, see `doc/configuration.md`.
---
## API Requests
The RPC API request can be either simple text or JSON. The RPC API request can be either simple text or JSON.
If the request is JSON (starts with '{'), it will reply with a JSON formatted If the request is JSON (starts with `{`), it will reply with a JSON formatted
response, otherwise it replies with text formatted as described further below. response, otherwise it replies with text formatted as described further below.
The JSON request format required is '{"command":"CMD","parameter":"PARAM"}' The JSON request format required is `{"command":"CMD","parameter":"PARAM"}`
(though of course parameter is not required for all requests) (though of course parameter is not required for all requests)
where "CMD" is from the "Request" column below and "PARAM" would be e.g. where "CMD" is from the "Request" column below and "PARAM" would be e.g.
the ASC/GPU number if required. the ASC/GPU number if required.
An example request in both formats to set GPU 0 fan to 80%: An example request in both formats to set GPU 0 fan to 80%:
```
gpufan|0,80 gpufan|0,80
{"command":"gpufan","parameter":"0,80"} {"command":"gpufan","parameter":"0,80"}
```
The format of each reply (unless stated otherwise) is a STATUS section The format of each reply (unless stated otherwise) is a STATUS section
followed by an optional detail section followed by an optional detail section
From API version 1.7 onwards, reply strings in JSON and Text have the From API version 1.7 onwards, reply strings in JSON and Text have the
necessary escaping as required to avoid ambiguity - they didn't before 1.7 necessary escaping as required to avoid ambiguity - they didn't before 1.7
For JSON the 2 characters '"' and '\' are escaped with a '\' before them For JSON the 2 characters `"` and `\` are escaped with a `\` before them
For Text the 4 characters '|' ',' '=' and '\' are escaped the same way For Text the 4 characters `|` `,` `=` and `\` are escaped the same way
Only user entered information will contain characters that require being Only user entered information will contain characters that require being
escaped, such as Pool URL, User and Password or the Config save filename, escaped, such as Pool URL, User and Password or the Config save filename,
when they are returned in messages or as their values by the API when they are returned in messages or as their values by the API
For API version 1.4 and later: For API version 1.4 and later the STATUS section is:
The STATUS section is:
STATUS=X,When=NNN,Code=N,Msg=string,Description=string| `STATUS=X,When=NNN,Code=N,Msg=string,Description=string|`
STATUS=X Where X is one of: * `STATUS=X` Where X is one of:
W - Warning `W` Warning
I - Informational `I` Informational
S - Success `S` Success
E - Error `E` Error
F - Fatal (code bug) `F` Fatal (code bug)
When=NNN * `When=NNN`
Standard long time of request in seconds Standard long time of request in seconds
Code=N * `Code=N`
Each unique reply has a unigue Code (See api.c - #define MSG_NNNNNN) Each unique reply has a unigue Code (See `api.c` and `api.h` - #define MSG_NNNNNN)
Msg=string * `Msg=string`
Message matching the Code value N Message matching the Code value N
Description=string * `Description=string`
This defaults to the sgminer version but is the value of --api-description This defaults to the sgminer version but is the value of `--api-description`
if it was specified at runtime. if it was specified at runtime.
With API V3.1 you can also request multiple report replies in a single command With API V3.1 you can also request multiple report replies in a single command
request request: e.g. to request both `summary` and `devs`, the command would be `summary+devs`
e.g. to request both summary and devs, the command would be summary+devs
This is only available for report commands that don't need parameters, **Note:** This is only available for report commands that don't need parameters,
and is not available for commands that change anything and is not available for commands that change anything. Any parameters supplied will be ignored.
Any parameters supplied will be ignored
The extra formatting of the result is to have a section for each command The extra formatting of the result is to have a section for each command:
e.g. CMD=summary|STATUS=....|CMD=devs|STATUS=... `CMD=summary|STATUS=....|CMD=devs|STATUS=...`
With JSON, each result is within a section of the command name
e.g. {"summary":{"STATUS":[{"STATUS":"S"...}],"SUMMARY":[...],"id":1},
"devs":{"STATUS":[{"STATUS:"S"...}],"DEVS":[...],"id":1},"id":1}
As before, if you supply bad JSON you'll just get a single 'E' STATUS section With JSON, each result is within a section of the command name
```
{
"summary":{
"STATUS":[
{"STATUS":"S"...}
],
"SUMMARY":[...],
"id":1
},
"devs":{
"STATUS":[
{"STATUS:"S"...}
],
"DEVS":[...],
"id":1
},
"id":1
}
````
As before, if you supply bad JSON you'll just get a single `E` STATUS section
in the old format, since it doesn't switch to using the new format until it in the old format, since it doesn't switch to using the new format until it
correctly processes the JSON and can match a '+' in the command correctly processes the JSON and can match a `+` in the command.
If you request a command multiple times, e.g. devs+devs If you request a command multiple times, e.g. `devs+devs`, you'll just get it once.
you'll just get it once
If this results in only one command, it will still use the new layout If this results in only one command, it will still use the new layout
with just the one command with just the one command
If you request a command that can't be used due to requiring parameters, If you request a command that can't be used due to requiring parameters,
a command that isn't a report, or an invalid command, you'll get an 'E' STATUS a command that isn't a report, or an invalid command, you'll get an `E` STATUS
for that one but it will still attempt to process all other commands supplied for that one but it will still attempt to process all other commands supplied
Blank/missing commands are ignore e.g. +devs++ Blank/missing commands are ignored. `+devs++` will just show `devs` using the new
will just show 'devs' using the new layout layout.
---
## API Commands
### version
Returns the version information of sgminer.
*Syntax:* `version`
For API version 1.10 and later: *Arguments:* None
The list of requests - a (*) means it requires privileged access - and replies: *Access*: `Non-priviledged`
Request Reply Section Details *Returns:*
------- ------------- ------- ```
version VERSION Miner="sgminer " sgminer version Miner="sgminer " <sgminer version>
CGMiner=sgminer version CGMiner=<sgminer version>
API=API version API=<API version>
```
config CONFIG Some miner configuration information: ### config
Returns some miner configuration information
*Syntax:* `config`
*Arguments:* None
*Access*: `Non-priviledged`
*Returns:*
```
GPU Count=N, <- the number of GPUs GPU Count=N, <- the number of GPUs
ASC Count=N, <- the number of ASCs ASC Count=N, <- the number of ASCs
PGA Count=N, <- the number of PGAs PGA Count=N, <- the number of PGAs
@ -158,45 +186,114 @@ The list of requests - a (*) means it requires privileged access - and replies:
ADL in use=X, <- Y or N if any GPU has ADL ADL in use=X, <- Y or N if any GPU has ADL
Strategy=Name, <- the current pool strategy Strategy=Name, <- the current pool strategy
Log Interval=N, <- log interval (--log N) Log Interval=N, <- log interval (--log N)
Device Code=GPU ICA , <- spaced list of compiled Device Code=GPU ICA, <- spaced list of compiled device drivers
device drivers
OS=Linux/Apple/..., <- operating System OS=Linux/Apple/..., <- operating System
Failover-Only=true/false, <- failover-only setting Failover-Only=true/false, <- failover-only setting
ScanTime=N, <- --scan-time setting ScanTime=N, <- --scan-time setting
Queue=N, <- --queue setting Queue=N, <- --queue setting
Expiry=N| <- --expiry setting Expiry=N| <- --expiry setting
```
summary SUMMARY The status summary of the miner ### summary
e.g. Elapsed=NNN,Found Blocks=N,Getworks=N,...|
pools POOLS The status of each pool e.g. Returns the status summary of the miner
Pool=0,URL=http://pool.com:6311,Status=Alive,...|
devs DEVS Each available GPU, PGA and ASC with their details *Syntax:* `summary`
e.g. GPU=0,Accepted=NN,MHS av=NNN,...,Intensity=D|
Last Share Time=NNN, <- standand long time in sec
(or 0 if none) of last accepted share
Last Share Pool=N, <- pool number (or -1 if none)
Last Valid Work=NNN, <- standand long time in sec
of last work returned that wasn't an HW:
Will not report PGAs if PGA mining is disabled
Will not report ASCs if ASC mining is disabled
gpu|N GPU The details of a single GPU number N in the same *Arguments:* None
format and details as for DEVS
pga|N PGA The details of a single PGA number N in the same *Access*: `Non-priviledged`
format and details as for DEVS
This is only available if PGA mining is enabled
Use 'pgacount' or 'config' first to see if there
are any
gpucount GPUS Count=N| <- the number of GPUs *Returns:* `Elapsed=NNN,Found Blocks=N,Getworks=N,...|`
pgacount PGAS Count=N| <- the number of PGAs ### devs
Always returns 0 if PGA mining is disabled
switchpool|N (*) Returns each available GPU, PGA and ASC with their details. **Note** that this will not return PGAs or ASCs if PGA or ASC mining is not enabled.
*Syntax:* `devs`
*Arguments:* None
*Access*: `Non-priviledged`
*Returns:*
```
GPU=0,Accepted=NN,MHS av=NNN,...,Intensity=D|
Last Share Time=NNN, <- standand long time in sec (or 0 if none) of last accepted share
Last Share Pool=N, <- pool number (or -1 if none)
Last Valid Work=NNN, <- standand long time in sec of last work returned that wasn't an HW
```
### gpu
Returns the details of a single GPU in the same format and details as [devs](#devs).
*Syntax:* `gpu|<N>`
*Arguments:* `number` GPU Number
*Access*: `Non-priviledged`
*Returns:*
```
GPU=0,Accepted=NN,MHS av=NNN,...,Intensity=D|
Last Share Time=NNN, <- standand long time in sec (or 0 if none) of last accepted share
Last Share Pool=N, <- pool number (or -1 if none)
Last Valid Work=NNN, <- standand long time in sec of last work returned that wasn't an HW
```
### pga
Returns the details of a single PGA in the same format and details as [devs](#devs). **Note** that this is only available if PGA mining is enabled. Use [pgacount](#pgacount) or [config](#config) first to see if there are any PGA devices.
*Syntax:* `pga|<N>`
*Arguments:* `number` PGA Number
*Access*: `Non-priviledged`
*Returns:*
```
PGA=0,Accepted=NN,MHS av=NNN,...,Intensity=D|
Last Share Time=NNN, <- standand long time in sec (or 0 if none) of last accepted share
Last Share Pool=N, <- pool number (or -1 if none)
Last Valid Work=NNN, <- standand long time in sec of last work returned that wasn't an HW
```
### gpucount
Returns the number of GPU devices.
*Syntax:* `gpucount`
*Arguments:* None
*Access*: `Non-priviledged`
*Returns:*
```
Count=N| <- number of GPUs
```
### pgacount
Returns the number of PGA devices.
*Syntax:* `pgacount`
*Arguments:* None
*Access*: `Non-priviledged`
*Returns:*
```
Count=N| <- number of PGAs
```
---
```
switchpool|N (*)
none There is no reply section just the STATUS section none There is no reply section just the STATUS section
stating the results of switching pool N to the stating the results of switching pool N to the
highest priority (the pool is also enabled) highest priority (the pool is also enabled)
@ -503,6 +600,7 @@ gpuenable|N (*)
A warning reply means lock stats are not compiled A warning reply means lock stats are not compiled
into sgminer into sgminer
The API writes all the lock stats to stderr The API writes all the lock stats to stderr
```
When you enable, disable or restart a GPU, PGA or ASC, you will also get When you enable, disable or restart a GPU, PGA or ASC, you will also get
Thread messages in the sgminer status window Thread messages in the sgminer status window
@ -553,17 +651,7 @@ miner.php - an example web page to access the API
See the end of this API readme for details of how to tune the display See the end of this API readme for details of how to tune the display
and also to use the option to display a multi-rig summary and also to use the option to display a multi-rig summary
---------- ## API Version History
Feature Changelog for external applications using the API:
API V
Modified API commands:
'version' - add 'Miner'
----------
API V4.0 (sgminer v5.0) API V4.0 (sgminer v5.0)
@ -999,8 +1087,8 @@ Commands:
---------------------------------------- ----------------------------------------
miner.php ## miner.php
=========
miner.php is a PHP based interface to the sgminer RPC API miner.php is a PHP based interface to the sgminer RPC API
(referred to simply as the API below) (referred to simply as the API below)

Write Preview
Loading…
Cancel
Save