ccminer 2.2.3 (Dec. 2017) "polytimos algo and keccakc (opt)" --------------------------------------------------------------- *************************************************************** If you find this tool useful and like to support its continuous development, then consider a donation. tpruvot@github: BTC : 1AJdfCpLWPNoAMDfHF1wD5y8VgKSSTHxPo DCR : DsUCcACGcyP8McNMRXQwbtpDxaVUYLDQDeU DJM34: BTC donation address: 1NENYmxwZGHsKFmyjTc5WferTn5VTFb7Ze cbuchner v1.2: LTC donation address: LKS1WDKGED647msBQfLBHV3Ls8sveGncnm BTC donation address: 16hJF5mceSojnTD3ZTUDqdRhDyPJzoRakM *************************************************************** >>> Introduction <<< This is a CUDA accelerated mining application which handle : Decred (Blake256 14-rounds - 180 bytes) HeavyCoin & MjollnirCoin FugueCoin GroestlCoin & Myriad-Groestl Lbry Credits JackpotCoin (JHA) QuarkCoin family & AnimeCoin TalkCoin DarkCoin and other X11 coins Chaincoin and Flaxscript (C11) Saffroncoin blake (256 14-rounds) BlakeCoin (256 8-rounds) Qubit (Digibyte, ...) Luffa (Joincoin) Keccak (Maxcoin) Pentablake (Blake 512 x5) 1Coin Triple S Neoscrypt (FeatherCoin) Revolver (X11evo) Scrypt and Scrypt:N Scrypt-Jane (Chacha) Sibcoin (sib) Skein (Skein + SHA) Signatum (Skein cubehash fugue Streebog) Tribus (JH, keccak, simd) Woodcoin (Double Skein) Vanilla (Blake256 8-rounds - double sha256) Vertcoin Lyra2RE Ziftrcoin (ZR5) Boolberry (Wild Keccak) Monero (Cryptonight) Aeon (Cryptonight-lite) where some of these coins have a VERY NOTABLE nVidia advantage over competing AMD (OpenCL Only) implementations. We did not take a big effort on improving usability, so please set your parameters carefuly. THIS PROGRAMM IS PROVIDED "AS-IS", USE IT AT YOUR OWN RISK! If you're interessted and read the source-code, please excuse that the most of our comments are in german. >>> Command Line Interface <<< This code is based on the pooler cpuminer and inherits its command line interface and options. -a, --algo=ALGO specify the algorithm to use bastion use to mine Joincoin bitcore use to mine Bitcore's Timetravel10 blake use to mine Saffroncoin (Blake256) blakecoin use to mine Old Blake 256 blake2s use to mine Nevacoin (Blake2-S 256) bmw use to mine Midnight cryptolight use to mine AEON cryptonight (MEM/2) cryptonight use to mine XMR cryptonight c11/flax use to mine Chaincoin and Flax decred use to mine Decred 180 bytes Blake256-14 deep use to mine Deepcoin dmd-gr use to mine Diamond-Groestl equihash use to mine ZEC, HUSH and KMD fresh use to mine Freshcoin fugue256 use to mine Fuguecoin groestl use to mine Groestlcoin heavy use to mine Heavycoin hsr use to mine Hshare jackpot use to mine Sweepcoin keccak use to mine Maxcoin keccakc use to mine CreativeCoin lbry use to mine LBRY Credits luffa use to mine Joincoin lyra2 use to mine CryptoCoin lyra2v2 use to mine Vertcoin lyra2z use to mine Zerocoin (XZC) mjollnir use to mine Mjollnircoin myr-gr use to mine Myriad-Groest neoscrypt use to mine FeatherCoin nist5 use to mine TalkCoin penta use to mine Joincoin / Pentablake phi use to mine LUXCoin polytimos use to mine Polytimos quark use to mine Quarkcoin qubit use to mine Qubit scrypt use to mine Scrypt coins scrypt:N use to mine Scrypt-N (:10 for 2048 iterations) scrypt-jane use to mine Chacha coins like Cache and Ultracoin s3 use to mine 1coin (ONE) sha256t use to mine OneCoin (OC) sia use to mine SIA sib use to mine Sibcoin skein use to mine Skeincoin skein2 use to mine Woodcoin skunk use to mine Signatum timetravel use to mine MachineCoin tribus use to mine Denarius x11evo use to mine Revolver x11 use to mine DarkCoin x14 use to mine X14Coin x15 use to mine Halcyon x17 use to mine X17 x17 use to mine X17 vanilla use to mine Vanilla (Blake256) veltor use to mine VeltorCoin whirlpool use to mine Joincoin wildkeccak use to mine Boolberry (Stratum only) zr5 use to mine ZiftrCoin -d, --devices gives a comma separated list of CUDA device IDs to operate on. Device IDs start counting from 0! Alternatively give string names of your card like gtx780ti or gt640#2 (matching 2nd gt640 in the PC). -i, --intensity=N[,N] GPU threads per call 8-25 (2^N + F, default: 0=auto) Decimals and multiple values are allowed for fine tuning --cuda-schedule Set device threads scheduling mode (default: auto) -f, --diff-factor Divide difficulty by this factor (default 1.0) -m, --diff-multiplier Multiply difficulty by this value (default 1.0) --vote=VOTE block reward vote (for HeavyCoin) --trust-pool trust the max block reward vote (maxvote) sent by the pool -o, --url=URL URL of mining server -O, --userpass=U:P username:password pair for mining server -u, --user=USERNAME username for mining server -p, --pass=PASSWORD password for mining server --cert=FILE certificate for mining server using SSL -x, --proxy=[PROTOCOL://]HOST[:PORT] connect through a proxy -t, --threads=N number of miner threads (default: number of nVidia GPUs in your system) -r, --retries=N number of times to retry if a network call fails (default: retry indefinitely) -R, --retry-pause=N time to pause between retries, in seconds (default: 15) --shares-limit maximum shares to mine before exiting the program. --time-limit maximum time [s] to mine before exiting the program. -T, --timeout=N network timeout, in seconds (default: 300) -s, --scantime=N upper bound on time spent scanning current work when long polling is unavailable, in seconds (default: 5) --submit-stale ignore stale job checks, may create more rejected shares -n, --ndevs list cuda devices -N, --statsavg number of samples used to display hashrate (default: 30) --no-gbt disable getblocktemplate support (height check in solo) --no-longpoll disable X-Long-Polling support --no-stratum disable X-Stratum support -q, --quiet disable per-thread hashmeter output --no-color disable colored output -D, --debug enable debug output -P, --protocol-dump verbose dump of protocol-level activities -b, --api-bind=port IP:port for the miner API (default: 127.0.0.1:4068), 0 disabled --api-remote Allow remote control, like pool switching, imply --api-allow=0/0 --api-allow=... IP/mask of the allowed api client(s), 0/0 for all --max-temp=N Only mine if gpu temp is less than specified value --max-rate=N[KMG] Only mine if net hashrate is less than specified value --max-diff=N Only mine if net difficulty is less than specified value --max-log-rate Interval to reduce per gpu hashrate logs (default: 3) --pstate=0 will force the Geforce 9xx to run in P0 P-State --plimit=150W set the gpu power limit, allow multiple values for N cards on windows this parameter use percentages (like OC tools) --tlimit=85 Set the gpu thermal limit (windows only) --keep-clocks prevent reset clocks and/or power limit on exit --hide-diff Hide submitted shares diff and net difficulty -B, --background run the miner in the background --benchmark run in offline benchmark mode --cputest debug hashes from cpu algorithms --cpu-affinity set process affinity to specific cpu core(s) mask --cpu-priority set process priority (default: 0 idle, 2 normal to 5 highest) -c, --config=FILE load a JSON-format configuration file can be from an url with the http:// prefix -V, --version display version information and exit -h, --help display this help text and exit Scrypt specific options: -l, --launch-config gives the launch configuration for each kernel in a comma separated list, one per device. --interactive comma separated list of flags (0/1) specifying which of the CUDA device you need to run at inter- active frame rates (because it drives a display). -L, --lookup-gap Divides the per-hash memory requirement by this factor by storing only every N'th value in the scratchpad. Default is 1. --texture-cache comma separated list of flags (0/1/2) specifying which of the CUDA devices shall use the texture cache for mining. Kepler devices may profit. --no-autotune disable auto-tuning of kernel launch parameters CryptoNight specific options: -l, --launch-config gives the launch configuration for each kernel in a comma separated list, one per device. --bfactor=[0-12] Run Cryptonight core kernel in smaller pieces, From 0 (ui freeze) to 12 (smooth), win default is 11 This is a per-device setting like the launch config. Wildkeccak specific: -l, --launch-config gives the launch configuration for each kernel in a comma separated list, one per device. -k, --scratchpad url Url used to download the scratchpad cache. >>> Examples <<< Example for Heavycoin Mining on heavycoinpool.com with a single gpu in your system ccminer -t 1 -a heavy -o stratum+tcp://stratum01.heavycoinpool.com:5333 -u <> -p <> -v 8 Example for Heavycoin Mining on hvc.1gh.com with a dual gpu in your system ccminer -t 2 -a heavy -o stratum+tcp://hvcpool.1gh.com:5333/ -u <> -p x -v 8 Example for Fuguecoin solo-mining with 4 gpu's in your system and a Fuguecoin-wallet running on localhost ccminer -q -s 1 -t 4 -a fugue256 -o http://localhost:9089/ -u <> -p <> Example for Fuguecoin pool mining on dwarfpool.com with all your GPUs ccminer -q -a fugue256 -o stratum+tcp://erebor.dwarfpool.com:3340/ -u YOURWALLETADDRESS.1 -p YOUREMAILADDRESS Example for Groestlcoin solo mining ccminer -q -s 1 -a groestl -o http://127.0.0.1:1441/ -u USERNAME -p PASSWORD Example for Boolberry ccminer -a wildkeccak -o stratum+tcp://bbr.suprnova.cc:7777 -u tpruvot.donate -p x -k http://bbr.suprnova.cc/scratchpad.bin -l 64x360 Example for Scrypt-N (2048) on Nicehash ccminer -a scrypt:10 -o stratum+tcp://stratum.nicehash.com:3335 -u 3EujYFcoBzWvpUEvbe3obEG95mBuU88QBD -p x For solo-mining you typically use -o http://127.0.0.1:xxxx where xxxx represents the rpcport number specified in your wallet's .conf file and you have to pass the same username and password with -O (or -u -p) as specified in the wallet config. The wallet must also be started with the -server option and/or with the server=1 flag in the .conf file >>> Configuration files <<< With the -c parameter you can use a json config file to set your prefered settings. An example is present in source tree, and is also the default one when no command line parameters are given. This allow you to run the miner without batch/script. >>> API and Monitoring <<< With the -b parameter you can open your ccminer to your network, use -b 0.0.0.0:4068 if required. On windows, setting 0.0.0.0 will ask firewall permissions on the first launch. Its normal. Default API feature is only enabled for localhost queries by default, on port 4068. You can test this api on linux with "telnet 4068" and type "help" to list the commands. Default api format is delimited text. If required a php json wrapper is present in api/ folder. I plan to add a json format later, if requests are formatted in json too.. >>> Additional Notes <<< This code should be running on nVidia GPUs ranging from compute capability 3.0 up to compute capability 5.2. Support for Compute 2.0 has been dropped so we can more efficiently implement new algorithms using the latest hardware features. >>> RELEASE HISTORY <<< Dec. 04th 2017 v2.2.3 Polytimos Algo Handle keccakc variant (with refreshed sha256d merkle) Optimised keccak for SM5+, based on alexis improvements Oct. 09th 2017 v2.2.2 Import and clean the hsr algo (x13 + custom hash) Import and optimise phi algo from LuxCoin repository Improve sib algo too for maxwell and pascal cards Small fix to handle more than 9 cards on linux (-d 10+) Attempt to free equihash memory "properly" --submit-stale parameter for supernova pool (which change diff too fast) Sep. 01st 2017 v2.2.1 Improve tribus algo on recent cards (up to +10%) Aug. 13th 2017 v2.2 New skunk algo, using the heavy streebog algorithm Enhance tribus algo (+10%) equihash protocol enhancement on yiimp.ccminer.org and zpool.ca June 16th 2017 v2.1-tribus Interface equihash algo with djeZo solver (from nheqminer 0.5c) New api parameters (and multicast announces for local networks) New tribus algo May. 14th 2017 v2.0 Handle cryptonight, wildkeccak and cryptonight-lite Add a serie of new algos: timetravel, bastion, hmq1725, sha256t Import lyra2z from djm34 work... Rework the common skein512 (used in most algos except skein ;) Upgrade whirlpool algo with alexis version (2x faster) Store the share diff of second nonce(s) in most algos Hardware monitoring thread to get more accurate power readings Small changes for the quiet mode & max-log-rate to reduce logs Add bitcore and a compatible jha algo Dec. 21th 2016 v1.8.4 Improve streebog based algos, veltor and sib (from alexis work) Blake2s greetly improved (3x), thanks to alexis too... Sep. 28th 2016 v1.8.3 show intensity on startup for each cards show-diff is now used by default, use --hide-diff if not wanted Sep. 22th 2016 v1.8.2 lbry improvements by Alexis Provos Prevent Windows hibernate while mining veltor algo (basic implementation) Aug. 10th 2016 v1.8.1 SIA Blake2-B Algo (getwork over stratum for Suprnova) SIA Nanopool RPC (getwork over http) Update also the older lyra2 with Nanashi version July 20th 2016 v1.8.0 Pascal support with cuda 8 lbry new multi sha / ripemd algo (LBC) x11evo algo (XRE) Lyra2v2, Neoscrypt and Decred improvements Enhance windows NVAPI clock and power limits Led support for mining/shares activity on windows May 18th 2016 v1.7.6 Decred vote support X17 cleanup and improvement Add mining.ping stratum method and handle unknown methods Implement a pool stats/benchmark mode (-p stats on yiimp) Add --shares-limit parameter, can be used for benchmarks Mar. 13th 2016 v1.7.5 Blake2S Algo (NEVA/OXEN) Feb. 28th 2016 v1.7.4 (1.7.3 was a preview, not official) Decred simplified stratum (getwork over stratum) Vanilla kernel by MrMad Drop/Disable WhirlpoolX Feb. 11th 2016 v1.7.2 Decred Algo (longpoll only) Blake256 improvements/cleanup Jan. 26th 2016 v1.7.1 Implement sib algo (X11 + Russian Streebog-512/GOST) Whirlpool speed x2 with the midstate precompute Small bug fixes about device ids mapping (and vendor names) Add Vanilla algo (Blake256 8-rounds - double sha256) Nov. 06th 2015 v1.7 Improve old devices compatibility (x11, lyra2v2, quark, qubit...) Add windows support for SM 2.1 and drop SM 3.5 (x86) Improve lyra2 (v1/v2) cuda implementations Improve most common algos on SM5+ with sp blake kernel Restore whirlpool algo (and whirlcoin variant) Prepare algo/pool switch ability, trivial method Add --benchmark alone to run a benchmark for all algos Add --cuda-schedule parameter Add --show-diff parameter, which display shares diff, and is able to detect real solved blocks on pools. Aug. 28th 2015 v1.6.6 Allow to load remote config with curl (-c http://...) Add Lyra2REv2 algo (Vertcoin/Zoom) Restore WhirlpoolX algo (VNL) Drop Animecoin support Add bmw (Midnight) algo July 06th 2015 v1.6.5-C11 Nvml api power limits Add chaincoin c11 algo (used by Flaxscript too) Remove pluck algo June 23th 2015 v1.6.5 Handle Ziftrcoin PoK solo mining Basic compatibility with CUDA 7.0 (generally slower hashrate) Show gpus vendor names on linux (windows test branch is pciutils) Remove -v and -m short params specific to heavycoin Add --diff-multiplier (-m) and rename --diff to --diff-factor (-f) First steps to handle nvml application clocks and P0 on the GTX9xx Various improvements on multipool and cmdline parameters Optimize a bit qubit, deep, luffa, x11 and quark algos May 26th 2015 v1.6.4 Implement multi-pool support (failover and time rotate) try "ccminer -c pools.conf" to test the sample config Update the API to allow remote pool switching and pool stats Auto bind the api port to the first available when using default Try to compute network difficulty on pools too (for most algos) Drop Whirlpool and whirpoolx algos, no more used... May 15th 2015 v1.6.3 Import and adapt Neoscrypt from djm34 work (SM 5+ only) Conditional mining options based on gpu temp, network diff and rate background option implementation for windows too "Multithreaded" devices (-d 0,0) intensity and stats changes SM5+ Optimisation of skein based on sp/klaus method (+20%) Apr. 21th 2015 v1.6.2 Import Scrypt, Scrypt:N and Scrypt-jane from Cudaminer Add the --time-limit command line parameter Apr. 14th 2015 v1.6.1 Add the Double Skein Algo for Woodcoin Skein/Skein2 SM 3.0 devices support Mar. 27th 2015 v1.6.0 Add the ZR5 Algo for Ziftcoin Implement Skeincoin algo (skein + sha) Import pluck (djm34) and whirlpoolx (alexis78) algos Hashrate units based on hashing rate values (Hs/kHs/MHs/GHs) Default config file (also help to debug without command line) Various small fixes Feb. 11th 2015 v1.5.3 Fix anime algo Allow a default config file in user or ccminer folder SM 2.1 windows binary (lyra2 and blake/blakecoin for the moment) Jan. 24th 2015 v1.5.2 Allow per device intensity, example: -i 20,19.5 Add process CPU priority and affinity mask parameters Intelligent duplicate shares check feature (enabled if needed) api: Fan RPM (windows), Cuda threads count, linux kernel ver. More X11 optimisations from sp and KlausT SM 3.0 enhancements Dec. 16th 2014 v1.5.1 Add lyra2RE algo for Vertcoin based on djm34/vtc code Multiple shares support (2 for the moment) X11 optimisations (From klaust and sp-hash) HTML5 WebSocket api compatibility (see api/websocket.htm) Solo mode height checks with getblocktemplate rpc calls Nov. 27th 2014 v1.5.0 Upgrade compat jansson to 2.6 (for windows) Add pool mining.set_extranonce support Allow intermediate intensity with decimals Update prebuilt x86 openssl lib to 1.0.1i Fix heavy algo on linux (broken since 1.4) Some internal changes to use the C++ compiler New API 1.2 with some new commands (read only) Add some of sp x11/x15 optimisations (and tsiv x13) Nov. 15th 2014 v1.4.9 Support of nvml and nvapi(windows) to monitor gpus Fix (again) displayed hashrate for multi gpus systems Average is now made by card (30 scans of the card) Final API v1.1 (new fields + histo command) Add support of telnet queries "telnet 127.0.0.1 4068" add histo api command to get performance debug details Add a rig sample php ui using json wrapper (php) Restore quark/jackpot previous speed (differently) Nov. 12th 2014 v1.4.8 Add a basic API and a sample php json wrapper Add statsavg (def 20) and api-bind parameters Nov. 11th 2014 v1.4.7 Average hashrate (based on the 20 last scans) Rewrite blake algo Add the -i (gpu threads/intensity parameter) Add some X11 optimisations based on sp_ commits Fix quark reported hashrate and benchmark mode for some algos Enhance json config file param (int/float/false) (-c config.json) Update windows prebuilt curl to 7.38.0 Oct. 26th 2014 v1.4.6 Add S3 algo reusing existing code (onecoin) Small X11 (simd512) enhancement Oct. 20th 2014 v1.4.5 Add keccak algo from djm34 repo (maxcoin) Curl 7.35 and OpenSSL are now included in the binary (and win tree) Enhance windows terminal support (--help was broken) Sep. 27th 2014 v1.4.4 First SM 5.2 Release (GTX 970 & 980) CUDA Runtime included in binary Colors enabled by default Sep. 10th 2014 v1.4.3 Add algos from djm34 repo (deep, doom, qubit) Goalcoin seems to be dead, not imported. Create also the pentablake algo (5x Blake 512) Sept 6th 2014 Almost twice the speed on blake256 algos with the "midstate" cache Sep. 1st 2014 add X17, optimized x15 and whirl add blake (256 variant) color support on Windows, remove some dll dependencies (pthreads, msvcp) Aug. 18th 2014 add X14, X15, Whirl, and Fresh algos, also add colors and nvprof cmd line support June 15th 2014 add X13 and Diamond Groestl support. Thanks to tsiv and to Bombadil for the contributions! June 14th 2014 released Killer Groestl quad version which I deem sufficiently hard to port over to AMD. It isn't the fastest option for Compute 3.5 and 5.0 cards, but it is still much faster than the table based versions. May 10th 2014 added X11, but without the bells & whistles (no killer Groestl, SIMD hash quite slow still) May 6th 2014 this adds the quark and animecoin algorithms. May 3rd 2014 add the MjollnirCoin hash algorithm for the upcomin MjollnirCoin relaunch. Add the -f (--diff) option to adjust the difficulty e.g. for the erebor Dwarfpool myr-gr SaffronCoin pool. Use -f 256 there. May 1st 2014 adapt the Jackpot algorithms to changes made by the coin developers. We keep our unique nVidia advantage because we have a way to break up the divergence. NOTE: Jackpot Hash now requires Compute 3.0 or later. April, 27 2014 this release adds Myriad-Groestl and Jackpot Coin. we apply an optimization to Jackpot that turns this into a Keccak-only CUDA coin ;) Jackpot is tested with solo--mining only at the moment. March, 27 2014 Heavycoin exchange rates soar, and as a result this coin gets some love: We greatly optimized the Hefty1 kernel for speed. Expect some hefty gains, especially on 750Ti's! By popular demand, we added the -d option as known from cudaminer. different compute capability builds are now provided until we figure out how to pack everything into a single executable in a Windows build. March, 24 2014 fixed Groestl pool support went back to Compute 1.x for cuda_hefty1.cu kernel by default after numerous reports of ccminer v0.2/v0.3 not working with HeavyCoin for some people. March, 23 2014 added Groestlcoin support. stratum status unknown (the only pool is currently down for fixing issues) March, 21 2014 use of shared memory in Fugue256 kernel boosts hash rates on Fermi and Maxwell devices. Kepler may suffer slightly (3-5%) Fixed Stratum for Fuguecoin. Tested on dwarfpool. March, 18 2014 initial release. >>> AUTHORS <<< Notable contributors to this application are: Christian Buchner, Christian H. (Germany): Initial CUDA implementation djm34, tsiv, sp and klausT for cuda algos implementation and optimisation Tanguy Pruvot : 750Ti tuning, blake, colors, zr5, skein, general code cleanup API monitoring, linux Config/Makefile and vstudio libs... and also many thanks to anyone else who contributed to the original cpuminer application (Jeff Garzik, pooler), it's original HVC-fork and the HVC-fork available at hvc.1gh.com Source code is included to satisfy GNU GPL V3 requirements. With kind regards, Christian Buchner ( Christian.Buchner@gmail.com ) Christian H. ( Chris84 ) Tanguy Pruvot ( tpruvot@github )