various small changes and update readme

Algo256/cuda_blake256.cu

@@ -73,7 +73,7 @@ static const uint32_t  c_u256[16] = {
 }
 
 //#define ROTL32(x, n) ((x) << (n)) | ((x) >> (32 - (n)))
-#define ROTR32(x, n) (((x) >> (n)) | ((x) << (32 - (n))))
+//#define ROTR32(x, n) (((x) >> (n)) | ((x) << (32 - (n))))
 #define hostGS(a,b,c,d,x) { \
 	const uint32_t idx1 = c_sigma[r][x]; \
 	const uint32_t idx2 = c_sigma[r][x+1]; \

README.txt

@@ -1,5 +1,5 @@
 
-ccMiner release 1.5.3-tpruvot (11 Feb 2015) - "Default Config"
+ccMiner release 1.6.0-tpruvot (Mar 2015) - "Pluck & Whirlpoolx"
 ---------------------------------------------------------------
 
 ***************************************************************
@@ -32,7 +32,7 @@ JackpotCoin
 QuarkCoin family & AnimeCoin
 TalkCoin
 DarkCoin and other X11 coins
-NEOS blake (256 14-rounds)
+Saffroncoin blake (256 14-rounds)
 BlakeCoin (256 8-rounds)
 Keccak (Maxcoin)
 Deep, Doom and Qubit
@@ -58,7 +58,7 @@ its command line interface and options.
 
   -a, --algo=ALGO       specify the algorithm to use
                           anime       use to mine Animecoin
-                          blake       use to mine NEOS (Blake 256)
+                          blake       use to mine Saffroncoin (Blake 256)
                           blakecoin   use to mine Old Blake 256
                           deep        use to mine Deepcoin
                           dmd-gr      use to mine Diamond-Groestl
@@ -74,10 +74,12 @@ its command line interface and options.
                           myr-gr      use to mine Myriad-Groest
                           nist5       use to mine TalkCoin
                           penta       use to mine Joincoin / Pentablake
+                          pluck       use to mine Supcoin
                           quark       use to mine Quarkcoin
                           qubit       use to mine Qubit Algo
                           s3          use to mine 1coin
                           whirl       use to mine Whirlcoin
+                          whirlpoolx  use to mine Vanillacoin
                           x11         use to mine DarkCoin
                           x14         use to mine X14Coin
                           x15         use to mine Halcyon
@@ -88,8 +90,8 @@ its command line interface and options.
                         Alternatively give string names of your card like
                         gtx780ti or gt640#2 (matching 2nd gt640 in the PC).
 
-  -i, --intensity       GPU threads per call 8-31 (default: 0=auto)
-                        Decimals are allowed for fine tuning
+  -i, --intensity=N[,N] GPU threads per call 8-25 (2^N + F, default: 0=auto)
+                        Decimals and multiple values are allowed for fine tuning
   -f, --diff            Divide difficulty by this factor (std is 1)
   -v, --vote            Heavycoin block vote (default: 512)
   -o, --url=URL         URL of mining server
@@ -152,6 +154,12 @@ and password with -O (or -u -p) as specified in the wallet config.
 
 The wallet must also be started with the -server option and/or with the server=1 flag in the .conf file
 
+>>> Configuration files <<<
+
+With the -c parameter you can use a json config file to set your prefered settings.
+An example is present in source tree, and is also the default one when no command line parameters are given.
+This allow you to run the miner without batch/script.
+
 
 >>> API and Monitoring <<<
 
@@ -175,6 +183,13 @@ features.
 
 >>> RELEASE HISTORY <<<
 
+  Mar. 2015       v1.6.0 (Note for CryptoMiningBlog: NOT YET RELEASED/FINISHED!)
+                  Import pluck (djm34) and whirlpoolx (alexis78) algos
+                  Hashrate units based on hashing rate values (Hs/kHs/MHs/GHs)
+				  Default config file (also help to debug without command line)
+                  Various small fixes
+                  More to come soon...
+
   Feb. 11th 2015  v1.5.3
                   Fix anime algo
                   Allow a default config file in user or ccminer folder
@@ -323,7 +338,7 @@ Notable contributors to this application are:
 
 Christian Buchner, Christian H. (Germany): Initial CUDA implementation
 
-djm34, tsiv, sp for cuda algos implementation and optimisation
+djm34, tsiv, sp and klausT for cuda algos implementation and optimisation
 
 Tanguy Pruvot : 750Ti tuning, blake, colors, general code cleanup/opts
                 API monitoring, linux Config/Makefile and vstudio stuff...

ccminer.cpp

@@ -159,7 +159,7 @@ bool opt_quiet = false;
 static int opt_retries = -1;
 static int opt_fail_pause = 30;
 int opt_timeout = 270;
-static int opt_scantime = 5;
+static int opt_scantime = 10;
 static json_t *opt_config;
 static const bool opt_time = true;
 static enum sha_algos opt_algo = ALGO_X11;
@@ -249,12 +249,12 @@ Options:\n\
 			x15         X15\n\
 			x17         X17 (peoplecurrency)\n\
 			whirl       Whirlcoin (old whirlpool)\n\
-			whirlpoolx  Whirlpoolx (Vanilla coin)\n\
+			whirlpoolx  Vanilla coin\n\
   -d, --devices         Comma separated list of CUDA devices to use.\n\
                         Device IDs start counting from 0! Alternatively takes\n\
                         string names of your cards like gtx780ti or gt640#2\n\
                         (matching 2nd gt640 in the PC)\n\
-  -i  --intensity=N     GPU intensity 8-31 (default: auto) \n\
+  -i  --intensity=N[,N] GPU intensity 8.0-25.0 (default: auto) \n\
                         Decimals are allowed for fine tuning \n\
   -f, --diff            Divide difficulty by this factor (std is 1) \n\
   -v, --vote=VOTE       block reward vote (for HeavyCoin)\n\
@@ -271,7 +271,7 @@ Options:\n\
   -R, --retry-pause=N   time to pause between retries, in seconds (default: 30)\n\
   -T, --timeout=N       network timeout, in seconds (default: 270)\n\
   -s, --scantime=N      upper bound on time spent scanning current work when\n\
-                          long polling is unavailable, in seconds (default: 5)\n\
+                          long polling is unavailable, in seconds (default: 10)\n\
   -N, --statsavg        number of samples used to display hashrate (default: 30)\n\
       --no-gbt          disable getblocktemplate support (height check in solo)\n\
       --no-longpoll     disable X-Long-Polling support\n\
@@ -1421,7 +1421,7 @@ static void *miner_thread(void *userdata)
 
 		case ALGO_WHIRLPOOLX:
 			rc = scanhash_whirlpoolx(thr_id, work.data, work.target,
-				max_nonce, &hashes_done);
+			                      max_nonce, &hashes_done);
 			break;
 
 		case ALGO_X11:
@@ -1436,17 +1436,17 @@ static void *miner_thread(void *userdata)
 
 		case ALGO_X14:
 			rc = scanhash_x14(thr_id, work.data, work.target,
-				max_nonce, &hashes_done);
+				                  max_nonce, &hashes_done);
 			break;
 
 		case ALGO_X15:
 			rc = scanhash_x15(thr_id, work.data, work.target,
-				max_nonce, &hashes_done);
+				                  max_nonce, &hashes_done);
 			break;
 
 		case ALGO_X17:
 			rc = scanhash_x17(thr_id, work.data, work.target,
-				max_nonce, &hashes_done);
+				                  max_nonce, &hashes_done);
 			break;
 
 		default:
@@ -2248,8 +2248,8 @@ int main(int argc, char *argv[])
 #else
 	printf("    Built with the nVidia CUDA SDK 6.5\n\n");
 #endif
-	printf("  Originally based on cudaminer by Christian Buchner and Christian H.,\n");
-	printf("  Include some work of djm34, sp, tsiv and klausT\n\n");
+	printf("  Originally based on Christian Buchner and Christian H. project\n");
+	printf("  Include some of the work of djm34, sp, tsiv and klausT.\n\n");
 	printf("BTC donation address: 1AJdfCpLWPNoAMDfHF1wD5y8VgKSSTHxPo (tpruvot)\n\n");
 
 	rpc_user = strdup("");
@@ -2302,7 +2302,7 @@ int main(int argc, char *argv[])
 	// extra credits..
 	if (opt_algo == ALGO_WHIRLPOOLX) {
 		printf("  Whirlpoolx support by Alexis Provos.\n");
-		printf("VNL donation address: VrjvyQJ9d1Bfte5kVSA8qfZoYdN2C6weCG\n\n");
+		printf("VNL donation address: Vr5oCen8NrY6ekBWFaaWjCUFBH4dyiS57W\n\n");
 	}
 
 	if (!opt_benchmark && !strlen(rpc_url)) {

ccminer.vcxproj

@@ -495,6 +495,9 @@
   <ItemGroup>
     <ResourceCompile Include="res\ccminer.rc" />
   </ItemGroup>
+  <ItemGroup>
+    <Text Include="README.txt" />
+  </ItemGroup>
   <Import Project="$(VCTargetsPath)\Microsoft.Cpp.targets" />
   <ImportGroup Label="ExtensionTargets">
     <Import Project="$(VCTargetsPath)\BuildCustomizations\CUDA 6.5.targets" />
@@ -506,4 +509,4 @@
   <Target Name="AfterClean">
     <Delete Files="@(FilesToCopy->'$(OutDir)%(Filename)%(Extension)')" TreatErrorsAsWarnings="true" />
   </Target>
-</Project>
+</Project>

ccminer.vcxproj.filters

@@ -582,4 +582,9 @@
       <Filter>Ressources</Filter>
     </ResourceCompile>
   </ItemGroup>
-</Project>
+  <ItemGroup>
+    <Text Include="README.txt">
+      <Filter>Ressources</Filter>
+    </Text>
+  </ItemGroup>
+</Project>

util.cpp

@@ -160,7 +160,7 @@ void get_defconfig_path(char *out, size_t bufsize, char *argv0)
 #endif
 	if (dir && stat(out, &info) != 0) {
 		// binary folder if not present in user folder
-		snprintf(out, bufsize, "%s%sccminer.conf\0", dir, sep);
+		snprintf(out, bufsize, "%s%sccminer.conf%s", dir, sep, "");
 	}
 	if (stat(out, &info) != 0) {
 		out[0] = '\0';
@@ -1266,7 +1266,7 @@ static bool stratum_notify(struct stratum_ctx *sctx, json_t *params)
 	ntime = swab32(ntime) - (uint32_t) time(0);
 	if (ntime > sctx->srvtime_diff) {
 		sctx->srvtime_diff = ntime;
-		if (!opt_quiet && ntime > 20)
+		if (opt_protocol && ntime > 20)
 			applog(LOG_DEBUG, "stratum time is at least %ds in the future", ntime);
 	}